DAN M. CABALERO
Block ** Lot **&** Carnation Street, BITZAIDA Sub.
Dumantay, Batangas City Philippines 4102
E-mail Add: acqs0q@r.postjobfree.com
Position: Heavy Equipment Mechanic
Tel no: +63-917******* Philippines
Mob no: +61-403****** or+61-427****** Australia
PERSONAL DETAILS:
Date of Birth : October 19, 1961 TIN : 162-515-160
Nationality : Filipino SSS Number : 03-673212-5
Marital Status : Married Passport No. : QQ0567369
Religion Roman Catholic Driver’s License : D04-95-088949
Place of Birth : Cebu City Philippines Driver’s License : AU. 6540754
Height : 169 cm. Driver’s License : KSA 218-***-****
Weight : 73 kgs. MALAC License : A004926
EDUCATIONAL ATTAINMENT:
LEVEL
NAME OF SCHOOL
DATE
COURSE/DEGREE
ELEMENTARY
Aurora A. Quezon Elem.School
San Andres Malate, Manila Phil.
1975-1982
Graduate/Primary
HIGH SCHOOL
Francisco V. Foundation Collage
Pedro Gil Pasco Manila Phil.
1982-1986
Graduate/High School
COLLEGE
Aeronautic Technical Institute
Domestic Airport/Pasay City Phil.
1986-1989
Under Grad./College
VOCATIONAL
National Manpower Youth Council
Bicutan,Taguig Manila Phil.
1989-1990
Graduate/Vocational
INFORMATION
TECHNOLOGY
Philippine International School
Pearson Vue (Authorized Center)
11/08/2007
12/20/2007
Introduction to Basic Computer
Hardware & PC Assembly
INFORMATION
TECHNOLOGY
Philippine International School
Pearson Vue (Authorized Center)
11/08/2007
12/20/2007
Introduction to Basic Networking Technology
OBJECTIVE:
I’m seeking a responsible and challenging position in the field of heavy engineering equipment, Shall be shown in the excellent of my responsibilities and services as reflected in the continued satisfaction of my employer. And quality, safety, therefore is my prime concern in all activities. Where my vast mechanical, automotive, electrical, Hydraulic system and welding skills can be fully used.
SKILLS:
As a Heavy Equipment Mechanic with a special skills in Hydraulic system, Electrical System, Pneumatic System, Welding SMAW (Oxyacetylene), Gas and Diesel Engine. Troubleshooting, Repairing and Overhauling Engineering Heavy and Light Equipment and vehicle such as: aviation and airport equipment Construction and Refinery Equipment and Marine Engine, Power Plant or Power Generators units, drilling and Rigs Equipment Airport and Seaport Equipment, Lifting and Loading Heavy Equipment Procedure and Techniques,Sea wage and Water Plant Operation and Maintenance. Experience in Corrective and Preventive European American and Japanese engine and equipment.
Maintained Light and Heavy Engineering Equipment and vehicle in an operation readiness state
Analyzed Troubleshooting, Repair and Electromechanical and interpret schematic diagram of Hydraulic System.
Repair, overhaul and modify brake system, clutch system, transmission, differential, gearbox, torque converter, suspension system, steering and hydraulic pump and accessories.
Research parts catalog schedule of preventive maintenance allocation board, equipment inspection checklist. Estimate cost of equipment parts and repair.
Self-improvement, importance of team work, good work practice, safety awareness, shop record, shop communication, service meeting.
PROJECT ASSIGNMENT AND ACCOMPLISHMENTS:
AIRLINE INDUSTRIES AVIATION AND AIRPORT OPERATION
SHIPYARD AND MARINE PROJECT
RERINERY OIL AND GAS PLANT PROJECT
POWER PLANT (GENERATOR) GEOTHERMAL PROJECT
DRILLING AND RIGS, CONSTRACTION PROJECT
TUNNELING MILITARY BASE AND SHELTER PROJECT
AIRPORT, SEAPORT AND DAM PROJECT
WATER AND SEAWAGE PLANT PROJECT DESALINATION,WATER TREATMENT
CONSTRACTION PROJECT, HEAVY LIFTING AND LOADING PROCEDURE
SEMINARS/ TRAINING ATTENDED
ABV Rock Group KB Riyadh K.S.A I SO 9000 QMS AWARNESS COURSE VME Industries Sweden
Safety Induction Training K.S.A. H.T.I PTE LTD. Epza Rosario, Cavite Phil. ABV Rock Group
January 12.2001 August 22, 1991 January 12, 2001
T.Q.M Total Quality Management INTERNAL QUALITY AUDIT PAX- TR SVC/ CONTRACT
Engineering Equipment Incorporation Neville- Clarke International SVC DGBTRNG
No. 12 Mangahan St. Libis Certificate No: PI-13250 Midway Phoenix Corporation
Quezon, City Phil. Course Date: 15-16 March 2001 P.O. Box 29460 Honolulu Hawaii
March 13, 199*-*****-**** U.S.A July, 22, 1992
NATIOANL MANPOWER YOUTH COUNCIL I.T Intensive Training
(NYMC) Heavy Equipment Repair Course Pearson Vue Authorized Center
Region IV Bicutan, Taguig Metro Manila Phi. Basic Computer & Hardware PC Assem.
Basic Computer, Networking Tech. Nov. 8, 2007 – Dec. 20, 2007
TESDA National Certificate II
Automotive Servicing Issued on: October 27, 2010
Valid until; October 27, 2010
MAJOR WORK AREA:
Repair, Overhauling, Troubleshooting, Maintenance, Servicing
DIESEL ENGINE REPAIR SPECIALIZATION:
Engine re-assembly, cylinder head assembly, Cylinder liners, pistons rings and connecting rods.
Checking Engine blocks and Cylinder heads, camshafts, crankshafts, water pumps, pistons, timing gear train and valves. Flywheel vibration dumper, pulley, idler gear pulley tensioned
Analysis of wear, breaks, cracks, and distortion,
Recondition of turbocharger, oil cooler, and heat exchanger.
Intake and Exhaust System and inter cooler
Cooling System
Air conditioning System
Lubricating System
Engine Control System
Major Internal and External Engine Repair and Overhaul
Removal, installation and alignment of engine, Engine components, Accessories and machinery.
MECHANICAL REPAIR SPECIALIZATION: HYDRAULIC REPAIR SPECIALIZATION:
Drive line and final drive Control valve Assy.
Vehicle Brake System Torque Converter Assy.
Transmission, Torque Converter Travel Motor and Swing Motor Assy.
Steering assy Hydraulic Pump Assembly
Differential Assembly Accumulator and Holding valve Assy.
Propellers Shaft Hydraulic Cylinder
Axle and hub assembly Valve body
Clutch Assy.
Gear Box and Transfer Case Assy.
Truck Shoe brake pad, Drum brake
Suspension and Under Chassis Repair
ELECTRICAL REAPIR SPECIALIZATION:
Alternator and Generator Assy.
Starter and Ignition Switch Assy.
Magnet Torque Assy.
Headlight, Backlight, Brake light, Signal Light
Working light, Beacon Light, Fog Light
Cabin light and Dash Board and Gauges
Sensors, Solenoid, Relays, Switches, Diodes
Harness, Horn, reverse warning horn, hour meter
Limit Switch, Timer’s, Joy Stick, and Pressure Switch
ADDITIONAL SKILLS:
Arc welding and oxyacetylene welding
Understanding dynamometer, load bank, grinding machine, drill presses
Research parts number and ordering Parts
Estimations of Labor Cost and Damage
Inspection of Equipment for Operation and Test
Distribution of Work Order and Time Table
Keep Maintenance Report and paper work Advance Preventive
EMPLOYMENT RECORD:
(From Present, Work Backward)
POSITION COMPANY YEAR EMPLOYMENT
FROM / UPDATE
Heavy Truck Mechanic
HOYLAKE TRANSFORT EQUIPMENT
#5 Central Avenue Zahelmare PERTH W.A
SEPTEMBER 01,2011
JUNE 26,2015
Ground Support Equipment Technician
Saudi Arabian Airlines
P.O.Box 4684 Riyadh 11412.Saudi Arabia
June 04, 2002
March 09, 2010
Heavy Equipment Supervisor
House Technology Industries PTE. LTD.
Blk 25C Ph IV Expansion, Cavite Export Processing Zone Rosario Cavite, Philippines.
Jan 04,2001
April 13,2002
Chief Mechanic
Trevi Foundation Philippines, Inc.
Unit 5-D Country Space I Bldg. Sen.Gil J Puyat Avenue, Salcedo Vill.Makati City, Philippines
July 01, 2000
Sept. 05, 2000
Heavy Equipment Mechanic/ Operator
MPC: Midway Phoenix Co.
P.O. Box 2946,Honolulu Hawaii 96820-1860 U.S.A
May 28, 1999
June 13, 2000
Chief Mechanic
El-Mar Fuente Co., Inc
ROOM 202,2nd Flr,L&S Bldg.1414 Roxas Blvd. Manila, Philippines
Feb. 16, 1999
May 14, 1999
Engineer Equipment
Repairman
SOMC: SOCP: Saudi Opt. & Maintenance.
Co.LTD. Saudi Ordn. Corp. Program
P.O. Box 58305 Riyadh 11594 Saudi Arabia
Sept. 10, 1995
Aug. 18, 1998
Heavy Equipment Mechanic
EEI: ENGINEERING EQUIPMENT CORPORATION, INC.
No.12 Mangahan St. Libis Q.C. Philippines
Jan. 09, 1993
June 10, 1994
Heavy Equipment Mechanic
ABV Rock Group KB
P.O. Box 57321,11574 Saudi Arabia
Aug. 20, 1991
Oct.13, 1992
Heavy Equipment Technician
Abu Thunian EST. K.S.A
P.O. Box 5123,11574 Saudi Arabia
June 11, 1989
May 29, 1991
Heavy Equipment Mechanic
EEI: ENGINEERING EQUIPMENT CORPORATION, INC.
No.12 Mangahan St. Libis Q.C Philippines
May 27, 1988
May 13, 1989
Heavy Equipment Mechanic
AG&P Atlantic Gulf & Pacific Co. INC.
345 Buendia Ave.Ext.Makati Metro Manila,
Sept. 16, 1986
May 14, 1988
EMPLOYMENT HISTORY JOB TITLE
1.ORGANIZATION NAME: HEAVY TRUCK MECHANIC
HOYLAKE TRANSPORT EQUIPMENT
#5 CENTRAL AVENUE HAZELMARE PERTH W.A.
RESPONSABILITIES AND ACCOMPLISMENT
MANUFACTURING, TRANSPORTATION INDUSTRY
SUMMARYOF QUALIFICATION
Great understanding of the full range of procedure and techniques used in servicing, repairing and maintaining vehicles and equipment such as heavy trucks construction equipment, fire apparatus, ground maintenance and forestry and related equipment and accessories.
Profound ability identifying and resolving the full range of problems associated with the work including determining the nature and extend of malfunction or damage.
Sound ability to inspect new vehicle and equipment for compliance with contract specification.
Proven ability to performed road and diagnostic test to locate defects in operation or to verify work orders, and complete non-structural welding on vehicle and equipment that is normally attached to vehicle.
Excellent ability to identify the full range of risk and liability implication associated with the work and take appropriate action to minimize those risks and refer organizational liabilities to supervisor.
Great understanding of established safety practices and equipment care procedures and demonstrated ability to instruct others in such practices and procedures.
Remarkable understanding of the operation of and skill in the use of the various tools, material and equipment used in the repair and maintenance of heavy truck and equipment and keeps current with industry changes
Excellent basic computer skills in operating a keyboard and a mouse
Profound knowledge of mechanical principles and theories.
Uncommon skill in the use of hand and power tools and equipment in the repair and overhauling of heavy trucks and equipment.
Immense ability in the repair and maintenance of complex mechanical, electrical, hydraulic and pneumatic power systems.
Exceptional ability to prioritize own work and meet project and program deadlines.
Proven ability to assist in the planning, coordination, and monitoring of projects and programs in assigned area of responsibility
RESPONSIBILITIES:
Repair replace damage worn parts
Operate inspect machine or heavy equipment to diagnose defects
Diagnose faults or malfunction to define required repairs, using engine diagnostic equipments like computerized test equipment calibration devices
Dismantle and reassemble heavy equipment using hoist hand tools
Clean lubricate, and perform other routine maintenance work on equipment vehicle
Schedule maintenance for industrial machine equipment, and keep equipment service records
Read understand operating manuals, blueprints, and technical drawings
Overhaul test machine or equipments to make sure operating efficiency
Fit bearing ‘to adjust, repair or overhaul mobile mechanical, hydraulic and pneumatic equipment
Weld or solder broken parts and structural member, using SMAW or Gas welding
Adjust and maintain industrial machinery, using control regulating devices
Direct workers who are assembling or disassembling equipment or cleaning parts
Repair, rewire and troubleshoot electrical system
Research, order and maintain inventory for service repair
EMPLOYMENT HISTORY JOB TITLE:
2. ORGANIZATION NAME:
SAUDI ARABIAN AIRLINES Ground Support Equipment Technician
P.O. Box 4684 Riyadh 11412 K.S.A.
RESPONSIBILITIES AND ACCOMPLISHMENT
Airline Industries
Work assigned at King Khalid International Airport.(KKIA) The GSE Mechanic is responsible for performing preventative maintenance, troubleshooting, maintain, modify, paint and repairs on airport ground support equipment, vehicles and other related equipment carry and operate radio as a required and operate such equipment as necessary to perform these function. Receive work orders and obtains the necessary tools required for the repair. Transports the vehicle(s) to be repaired by driving, towing or pushing into service bay. Vehicles may consist of tags tractor, forklifts, and other larger airport vehicles. Inspects parts and/or other motor vehicles, and airport equipment such as: AIRCRAFT-PUSH BACK TRACTOR-GROUND POWER UNIT (GPU)-AIRCONDITIONING UNIT (ACU) AIR STARTING UNIT(ASU)-HIGH LOADER-TRANSFORTER-PASSENGER STEP-CONVEYOR BELT LOADER-BAGGAGE TRACTOR (tug/Clark)-MEDICAL LIFT (medical evacuation unit)-FORK LIFT (Clark/caterpillar)-FUEL TRACK-LIGHTING CART-LAVATORY EQUIPMENT and NON MOTORIZED EQUIPMENT such as TOWBARS-AIRCRAFT JACK-AXLE JACK-FUSE LADGE JACK-DOLLY CART-NITROGEN CART-BAGGAGE CART- BAGGAGE RACK.
Essential Function:
Inspection, test and repair of GSE Equipment associated with the aircraft environment.
Perform schedule preventatives maintenance on company ground equipment.
Perform complex repair on vehicles, both electrical and mechanical.
Perform diagnostic procedures on vehicles and equipment to determine needed repair.
Perform electrical diagnostic and repair on vehicles and equipment fuel and wash equipment as needed
Perform welding repair with welding, or acetylene gas welding.
Order, receive, and inventory parts and supplies.
Report any maintenance. Requirements to management and communicate as needed with contract maint.personal.
Inspection, test and repair GSE equipment associated with the aircraft environment.
Perform engine overhaul and troubleshooting.
Analyzed electrical system (AC & DC) elect’. Motors, generators and associated with rotating machinery.
Experience using load bank for GPU, DYNATEST for new overhaul engine, fuel calibrating machine, engine compression testing, alternator and generator testing machine, engine analyzer machine, grinding and cutting machine and knowledge basic electronics component and parts.
Ability to work independently in Mechanical problem with good decision making.
3. ORGANIZATION NAME: JOB TITLE:
HOUSE TECHNOLOGY INDUSTRIES PTE. LTD. HEAVY EQUIPMENT
Block 25C Phase IV Expansion, Cavite Export Processing Zone SUPERVISOR
Rosario, Cavite, Philippines
RESPONSIBILITIES AND ACCOMPLISHMENT:
FACTORY, HOUSE TECHNOLOGY, IMPORT, EXPORT
SUMMARY: Profoundly talented Diesel Repair Service Supervisor with over six year experience in the operation and mechanical maintenance of power plant, the maintenance of deferent types of forklift and vehicle and stationary mechanical plant, the management of forklift maintenance fuel and lube oil storage, the provision of mechanical electrical workshop and field services, the management of workshop spare parts and consumable stocks, and the training and endorsement of associates to operate vehicle and mechanical plant.
SUMMARY of Q UALIFICATION
Great experience in managing plant and equipment and workshop facilities
Excellent knowledge and experience in diesel engine maintenance repair and overhaul
Remarkable knowledge of maintenance and repair of heavy equipment and plant, including tracked wheeled and stationary plant.
Profound knowledge of maintenance and repair of small plant, including pumps, generators sets heaters, outboard motors etc.
Great knowledge of welding and metal fabrication occupational health and safety issues.
In-depth knowledge of hydraulic system
Strong knowledge of automotive electric’s
Profound knowledge of maintenance of stock inventories including stocktaking, reordering.
4. ORGANIZATION NAME: JOB TITLE:
TREVI FOUNDATION PHILIPPINES, INC CHIEF MECHNIC
Unit 5-D Country Space 1 Building, Sen. Gil Puyat Ave.
Salcedo Village, Makati City Philippines
RESPONSIBILITIES AND ACCOMPLISHMENT
Drilling and Filling Drive Project:
Work under Italian company and Italian personnel. Directly report to Plant Manager discuss about the status of workshop and project operation, And maintenance of equipment and machine. Assign at workshop to inspect all incoming equipment. From project backload for major repair Evaluation of shop records and scheduling of equipment Preventive maintenance with allocation board. Prepare manpower daily work assignment, manpower cost of labor, equipment estimation of repair and cost.
Project assignment at Bataan Polyethylene Corporation (Lamao, Bataan) to maintain and repair, American crane 450Tcap. Model AH1130 and assist Van Sueveren crane 1800T cap. With assisted German personnel
5. ORGANIZATION NAME: JOB TITLE:
MIDWAY PHOENIX CORP. HEAVY EQUIPMENT MECHANIC
P.O. BOX 29460, Honolulu Hawaii 96820-1860 U.S.A OPERATOR
RESPONSIBILITIES AND ACCOMPLISHMENT, Airline Industries, Airport, and Shipyard Project
Performed work responsibilities under American supervisor, test and analyze malfunction equipment and machine. Troubleshoots, overhauls, rebuilds, and repairs both powered and non-powered support equipment systems. Performs scheduled and unscheduled maintenance, inspects, tests, and operates equipment to determine serviceability and proper operation. Work is performed on a variety of aircraft ground support platforms, such as jet engine starters, power supply units and air cycle air conditioners. Applies thorough knowledge of the mechanical, electrical makeup and operation of both powered and non-powered AGE (Aircraft Ground Equipment) to remove, disassemble, repair, clean, treat for corrosion, assemble, and re-install AGE accessories and components. Uses complex troubleshooting, testing and repair equipment such as but not limited to, load banks, impedance bridges, multi-meters and flow meter panels. May provide dispatch service for AGE, including positioning equipment to support aircraft maintenance and flying operations. Operates, cleans, inspects, and services AGE towing vehicles and other automotive vehicles used military training in maintenance and repair of automotive or AGE equipment. As a Heavy Equipment Mechanic/ Operator
6. ORGANIZATION NAME: JOB TITLE:
EL MAR FUENTE CO. INC. CHIEF MECHANIC
Rosario, Cavite, Philippines
RESPONSIBILITIES AND ACCOMPLISHMENT
Refinery, Sales and Rental, Construction Project
Assigned workshop and field service. Report to Plant Manager discuss about workshop status.Performe preventive maintenance schedule, monthly costing of repair and parts. Report equipment breakdown and readiness state. Report consumption of fuel and oil. Assign every personnel under my responsibilities and on hands, repair, troubleshooting and overhauling. Prepare daily manpower schedule, daily manpower timetable and work accomplishment. Analyst how to minimize costing of parts, breakdown and submission of weekly and monthly report to Plant Manager. Prepare requisition of parts list, chemical power tools replacement, fuel and oil to be submitted at warehouse personnel. And self-improvement, importance of teamwork and safety awareness as a Chief Mechanic.
7. ORGANIZATION NAME: JOB TITLE:
SAUDI OPERATION & MAINTENANCE CO. LTD. ENGINEER EQUIPMENT
SAUDI ORDINANCE CORPS. PROGRAM REPAIRMAN
P.O. BOX 58305 Riyadh, 11594 Saudi Arabia
RESPONSIBILITIES AND ACCOMPLISHMENT:
Military Base and Shelter, Construction Project
Work under the general direction of workshop Director and under supervisor of American military and Saudi Arabian Army (SAA). Expected to work with minimum technical proficiency in the performance of duty. Work with assists and provides on the job training to designated personnel. Performs organizational through general support categories of preventive maintenance of all types of equipment and machine include: power generator. Pumps, bridging, forklift, cranes, bulldozer, pay loader, excavator, AMO carrier, armor truck, refer van and assists in procurement of required parts and / or assemblies. Performs minor and major repair and maintenance of engine transmission, suspension, steering and breaking system. Hydraulic pump, control valve, torque converter, solenoid valve, hydraulic cylinder, fuel pump, air compressor, generator, electrical and mechanical works and other auxiliary equipment as an Engineer Equipment Repairman.
8. ORGANIZATION NAME: JOB TITLE:
EEI ENGINEERING EQUIPMENT INC. HEAVY EQUIPMENT MECHANIC
No. 12 Mangahan St. Brgy. Bagong Bayan TECHNICIAN
Libis, Quezon City Philippines
RESPONSIBILITIES AND ACCOMPLISHMENTS:
Refinery, Oil and Gas Plant, Construction Project
Responsible for maintaining heavy equipment and machine at Shell Philippine Refinery (Tabangao Batangas) project and modernization of refinery under the general contractor of FLOUR-DANIEL (American Company) with a sub-contractor of EEI Corp. Performed duties as a heavy equipment mechanic to maintain mechanical crane Manitowoc 250 tons, American crane model AH11320 450 tons capacity, 16 units hydraulic crane from 35 tons cap. To 200 tons cap. Assist of heavy lifting and loading of reactor, smoke stock, pressure vessel, pumps and pipeline. Repair of construction equipment such as air compressor, welding machine, power generator, excavator, bulldozer, pay loader, road roller, and compactor. Maintenance and repair of motor and pumps, gate valves, heat exchanger, large tank, vessels, hydro testing with under operational condition of refinery and requisition of parts as a Heavy Equipment Mechanic
9. ORGANIZATION NAME: JOB TITLE:
A.B.V. ROCK GROUP KB HEAVY EQUIPMENT MECHANIC
P.O. Box 57321 Riyadh, 11574 Saudi Arabia
RESPONSIBILITIES AND ACCOMPLISHMENT:
Tunneling, Drilling and Construction Project
Under Swedish personnel performed duties and responsibilities as a heavy mechanic. Assigned at workshop and field service to repair, troubleshooting and maintained electrical and mechanical failure, caterpillar equipment and machine such as tractor, track type model: D9L,D8N,D10N and D7H truck off hi-way model: 769,776B and 785B pay loader model: 994, 996D, 988, 980 and 950E motor grader model: 12G, 16G, 112 and 130G excavation model: E180, E240, E300 dump truck model: D550, D44B, D3CHP scraper tractor model: 639D, 650, 641, 637 and 631E and caterpillar engine such as model: 342,353,3306,3408, 3412,3512 remanufacture engine and overhaul, troubleshooting, repair of fuel system, lubricating system, cooling system hydraulic system, brake and steering system, electrical system. In frame overhaul and power train such as transmission, clutch assembly, torque converter, differential gear box, steering and hydraulic pumps. Function of service manual, service procedure and safety awareness as a Heavy Equipment Mechanic.
10. ORGANIZATION NAME: JOB TITLE:
ABOU THUNIAN EST K.S.A EQUIPMENT MECHANICAL
P.O. Box 5123, 11 57 Saudi Arabia TECHNNICIAN
RESPONSIBILITIES AND ACCOMPLISHMENT:
Water Plant Sea wage Plant and Shipyard Project
Assign at workshop and field servicing of auxiliary equipment and machine. Such as water pump and motor air compressor, cooling tower, alignment of fan blade and motors. Using dial indicator micro meter, veneer caliper, feeler gauges, straight edge and other related precision measuring tools and technique. Assist operation of water plant (reverse osmosis) irrational and flirtation procedure, sewage plant, water cycle to be used for washing and watering plants. Maintenance of boiler plant, repair and calibrate fuel injection furnace, insulator, valves, relief valves, agitator pump. Performed technical maintenance, aside from plant operation and maintenance. Also repair heavy equipment such as pay loader, grader, bulldozer, crane, road roller and transit mixer and dump truck as a Heavy Equipment Mechanic.
11. ORGANIZATION NAME: JOB TITLE:
EEI ENGINEERING EQUIPMENT CO. HEAVY EQUIPMENT MECHANIC
No. 12 Mangahan, St. Brgy. BagongBayan TECHNICIAN
Libis, Quezon City
RESPONSIBILITES AND ACCOMPLISHMENT:
Refinery, Gas & Oil Plant, Power Plant Construction Project
Under EEI Project assigned at Philippine Petroleum Corporation (PPC Pillelia Rizal). Construction of foundation and installation of 4 units power generator engine model VOXXII Japan made 32 inches bore diameter, repair and overhaul (remanufactured) and performed failure analysis, checking cylinder blocks and heals, camshafts and connecting rod bearing piston and piston ring, timing gear train and valves, analysis of war, breaks, cracks and distortion. Also assist to maintain and repair construction equipment such as crawler and mobile crane, bulldozer, grader, pay loader, compactor, excavation, air compressor and welding machine. Project assigned at EEI fabrication and shipyard facilities at (Bauan, Batangas). To maintain and repair air compressor for sand blasting, crane for lifting vessels and fabricated tanks and pipes. Repair prime mover for hauler as a HEAVY EQUIPMENT MECHANIC TECHNICIAN.
12. ORGANIZATION NAME: JOB TITLE:
AG&P ATLANTIC GULF & PACIFIC CO. INC. HEAVY EQUIPMENT MECHANIC
345 Buendia Ave. ext.Makati, Metro Manila Philippines
REPONSIBILITES AND COMPLISHMENT
Refinery, Shipyard, Marine and Construction Project
Responsible for maintaining heavy construction equipment at home base (Tanyag, Bicutan, Taguig Metro Manila Phil.). Assigned at overhauling section to overhaul Cummins engine model NTA 400, NTC 350, NTF 255, VT 555, KTA 600, VT 350, and Detroit engine (GM) model 645, 567, 278, 268, 71 and 52 series. And Mitsubishi, Isuzu, Perkins, Mercedes, Deutz Volvo, and caterpillar generating sets. Assign at Philippine Shell Refinery at (Tabangao, Batangas) under ENTERBETON Project. Repair of smoke stock, pipelines, heat exchanger, and boiler and off shore gasoline station (GT). Assigned at AG&P marine yard at (Bauan, Batangas) international container port terminal project.PINAMUKAN power plant at (Batangas Philippines). A 1.3 megawatt combine- cycle power plant and geothermal plant at (San Pablo, Laguna.).Repair, troubleshoot and maintained heavy equipment and machine as a HEAVY EQUIPMENT MECHANIC.