Education: Texas Tech University Lubbock TX University of Houston-Victoria Victoria, TX
Bachelor of Science in Electrical Engineering Bachelor of Science in Computer Science
Graduated: Spring 2012 Graduated: December 2002
Experience: Gennie Overhead Door Dallas, TX 03/2015 – 06/2015
Embedded Engineer 3 (Contract)
Embedded Device development using CC3200, CC2541 and CC Debugger,
Functional testing of Blue Tooth Low Energy device on Device
Electrical Testing of Embedded Device to ensure meet specifications
802.11/a/b/g/n Data Analysis with Wireshark and Acrylic WiFi
Bluetooth low energy Data Analysis
Test Spec Development for Safety, Mobile Device and User I/O
Soldering of components for enabling of electrical measurements using Multi-meter and Bench Power Supply
Modification of Specification of Embedded Device
Creation of Testing Design Document
CyberGroup Dallas, TX 08/2014 – 03/2015
Sr. Embedded Engineer
Development of Embedded Application for Air Flitration Device on TI CC3200 Hardware
Development of Embedded Application for Laser Bank Control on a Custom Embedded Controller
Sensor Control and Data Acquisition via I2C, ADC, CANopen, Bit banging
Sensor Measurement of Temperature, Humidity, Volatile Organic Compound, Pressure, Ultraviolet Light
Data Transport over HTTP Protocol using JSON format to Application Server for Mobile Application
Hardware Tools for Embedded Application Development: Oscilliscope, Logic Analyzer, Multi-Meter, Power Supp.
Soldering, Hot Air Work done for circuit board creation/modification(pull-up/pull-down resistor, op-amps, opto-couplers, resistor networks, and interface connectors)
Real-Time Operating System used FreeRTOS on TI CC3200
Interrupt Service Routines and Timer created and used on TI CC3200
Task Creation/Control/Management in FreeRTOS
Schematic Analysis and Interpretation of Custom Embedded Controller and CC3200 Hardware
Hardware and Software Specification Re-write for Custom Embedded Controller
Embedded Application Development in C and Structured Text List
Client Interaction for Analysis and Requirements Gathering for Embedded and Hardware Development
Code Composer and CODESYS for Embedded Software Creation, Debugging and Analysis
GIT for Software Management and Control
IBM Doors for Requirements Management
Rockwell Automation Mayfield Heights, OH 10/2013 – 08/2014
Embedded Test Engineer (Contract)
Object Oriented Design(OOD), Object Oriented Analysis(OOA) and Debugging in C++ of new product applications and legacy applications in Real Time Embedded Environment (Vx Works 6.9 and ABOS)
Refactor, design and testing of Threading, TCP/IP, Interrupts, File System Operations Applications
Use of WindRiver’s Workbench 3.4-10 and WindRiver’s ICE 2 JTAG HighSpeed Debugger for static code analysis and Debugging
Development, Modification and Testware in a custom Client-Server Framework Environment using XML and Python Scripting
Troubleshooting and Modification of Testware using Python and XML on server side
Creation and Modification of Test Code on the Device Under Test in C++, Vx Works 6.9 and RTOS
Participate in code reviews for new and modification of test software and product code using C++, OOA/OOD for System Level Applications
Execution of Platform Functional Testing for Release Hardware
Use of IBM Clear Case Manager Source Code Management System
Packet Analysis using Ethernet Tap and Wireshark
Dematic Lewisville, TX 07/2012 – 10/2013
Systems Control Engineer
Development of component behaviors in Emulations using OOA/OOD, Jscript .NET in Demo3D
VBA programming, Regular Expressions, for Manipulation of Configuration Files for Emulation(strong emphasis on Regular Expressions)
Emulation Testing of Control Systems for Automated Material Handling Systems using Demo3D, Allen Bradley Programmable Logic Controllers: PLC5, SLC, Compactlogix, Micrologix and ControlLogix processor on Ethernet Profibus, networks
Configuration, Testing and Validation of Layer 2 Switches for Isolation of Control System Communication of new system from client existing network by implementing Private Virtual LANS and testing using packet analyzer
Computer Aided Design of Control Systems: Device Layout, Power, I/O, Network, HMI's using AutoCAD Electrical
Full Load Amperage Calculation for Device and wire Selection adhering to NFPA Code
RSLogix(5, 500, and 5000) for emulation testing and validation
RSLinx Classic Gateway for OPC Service connecting the controller to the Emulation Model in Demo3D
RSI OPC Test Client for Troubleshooting and Analysis of OPC Server and Programmable Logic Controller
Development of Description of Operations for Automated Material Handling Control Systems
TTU SoC Design Group and University Medical Center Lubbock, TX 08/2011 – 05/2012
Project: Embedded Software Development for Medical Device
Software Development for Medical Device using C and IAR
Feasibility Study of Current Embedded System for Acquisition for Data Acquisition and Data Transport
Selection and Characterization of ADC and its impact on Embedded System
Software Development of Microprocessor and Peripherals: Interrupts, UART, SPI, Timers, Direct Memory Access, UART, Internal ADC and external ADC
Hardware Testing and Analysis of Embedded System Software using a Digital Storage Oscilloscope and Logic Analyzer
Texas Tech University Lubbock, TX 05/2011 – 08/2011
Project: Embedded Software Development of Frequency Synthesizer for a 50MHz to 55MHz Transmitter
Embedded Programming of Micro-controller for interface to a Frequency Synthesizer
Testing using Digital Storage Oscilloscope, Logic Analyzer, Spectrum Analyzer, and Network Analyzer
Calculation of Frequency Range and Frequency Step Size
Eagle CAD PCB Layout Design and PCB Milling for Prototype Board
Ethicon San Angelo, TX 06/2010 – 01/2011
Electrical Engineer CO-OP
Designed, developed and tested an Order Mix Prevention System on a Packaging Machine
Collaboration with Engineers, Mechanics, Electricians, and Operators for the Order Mix Prevention System
Re-design of selected parts of Packaging and Cellophane Wrapping Machine using Solid Works
Time Analysis from the initial signal from the Proximity Sensor to the Reading and Processing of the Bar Codes of a Vision System and Bar Code Reader
Analysis of Optical Characteristics of Vision System and Bar Code Reader to determine: Hyperfocal length, Depth of field, Optimal f-number, Field of view
Analysis and modification of the Electrical and Mechanical systems of the Packaging Machine
Texas Tech University Lubbock, TX 01/2010 – 05/2010
Project: Electrical Testing, Embedded Programming and Mechanical Design for Robotic Arm
Mechanical Design and Analysis for Robotic Arm
Design, Analysis of PID Controller for Robotic Arm
Calculation of Torque Loads of servo selection for Robotic Arm
C programming for micro-controller for Torque and Inrush Current Analysis and Testing
Electrical Testing using Digital Storage Oscilloscope
Texas Tech University Lubbock, TX 08/2008 – 12/2008
Project: EM Field Sensor Design, Research and Development for Automated Guided Vehicle
PSpice Cadence for Design, Simulation of Tuned Circuit, Rectifier and Voltage Ladder
Testing and Analysis of Tuned Circuit using Digital Storage Oscilloscope
Measurements of Sensor response to EM Field for optimal location and orientation using Digital Storage Oscilloscope
Rice University Houston, TX 02/2004 – 05/2008
Senior IT Specialist
Designed, developed, tested and Documented: Scheduling Web Application for Department Visitors, using UML Modellor, Test Driven Development, Mock Objects, DOM, Javascript, Regular Expressions, PHP5, Design Patterns, OOP/OOD, PHPDoc, MySQL with InnoDB for ACID transactions
Designed, developed, tested: Web Bot for aggregating seismic data from various sensor arrays using Perl OOP/OOD, phpDocumentor and Regular Expressions
System and Network Administration of Windows, Solaris, and Linux Systems
EV1 Servers Houston, TX 02/2003 – 01/2004
Linux and Web Technician
Maintain Rack3, Rack4, Ensim, and Plesk servers running a variety of Internet Applications DNS, Web, and Email Servers
Provided Support, Troubleshooting and Analysis of Rack Systems for end users, government agencies and internal company
Maintain expertise to help customers with Security, Performance and Optimization
Scripting Debugging of sites with CGI, PHP, JavaScript Applications
Madero Engineering and Architects, L.L.C Houston, TX 01/2002 – 02/2003
Developer / System Administrator
Used VBA/VB with DAO, ADO, SQL to enhance and maintain “AOV CAT” an application for quality assurance for Nuclear Power Stations
Developed “Employee Augmentation” a database application written VBA-Access and Access Database
Network Deployment using cat5e, routers, switches, and hubs on a business DSL, Cable, T1 lines
Installed, configured, and maintained HTTP, Databases, SFTP, SMTP, POP3s servers
Lawca Houston, TX 04/2002 – 04/2003
Contract: Lawca Data Mining
Designed, Developed and Tested Multi User Agent Data Harvesting Application in Perl
Concurrent Programming for balancing of work load to each Web Bot
Use of Regular Expression as rule set for specific data
Redundancy feature for User Agent connection break or HTTP server detection
Thales GeoSolutions Houston, TX 12/2002 – 01/2003
Contract: Thales Geosolutions
Designed, Devloped and Testing “Bid Maker” Application for Bid Proposals
Use of VBA Excel, .NET 1.1, Regular Expression and MS Access for Application
Documented Bid Maker and Trained Client Employees
Interfacing with Client to gather requirements
Programming Languages: C, C++, Java, Assembly, PHP5, Perl, Visual Basic & VBA, MATLAB, Ladder Logic, Microsoft Jscript,
SQL, Scheme, Prolog, Windows Batch Scripting
Programing Paradigms: Concurrent, Logic, Functional, Imperative, Object Oriented Analysis/Design(OOA/OOD),
Event Driven, Generic
Programming Methodologies: Test-Driven, Design Patterns, Mock-Objects
Software Testing: Unit Testing, Mock Objects
Software Engineering: Extreme Programming, Waterfall, Test-Driven Development, UML
IDE's: IAR, Code Composer, Visual Studio
Computer Aided Design: AutoCad Electric, Solidworks
Industrial Control Hardware: AB PowerFlex VFD, AB MSP, Contactors, Photo Eyes, Prox Switches
Industrial Vision Systems & Readers: Cognex Insight 5000, Cognex Dataman
Industrial Communication: RIO, Ethernet/IP, AS-i, Data Highway
HMI/SCADA: Proficy HMI/SCADA iFix
Microcontroller: TI MSP430
Microcontroller Peripherals: DMA, USART, ADC
Digital Signal Processor: TI TMS320C6713DSK
FPGA: Xilinx Spartan
BUS Interface: I2C, SPI, Serial(1,2,3 wire), Parallel
Electronic Design Automation: Orcad, Eagle, PSpice
Measurement and Testing: Logic Analyzer, Spectrum Analyzer, Digital Storage Oscilloscope, Network Analyzer
Database Programming Interfaces: DAO, ADO, ODBC
DBMS: MS Access,MS SQL Server, Mysql
Microsoft Technologies: COM, WMI, WSH, .NET
Operating Systems: Windows 2000/XP/Vista, Linux, Sun Solaris, OS X, Free BSD
Unix Shells: Bash, Zsh
Communication Models: Open Systems Interconnections(OSI)
Network Tools: TCP Dump, Arp, Ping, Tracert, Nslookup
Natural Languages: Can speak, read and write fluently in Spanish