L ONG HONG NGUYEN

**** ** ******* *****, ** lpitas, CA 95035

Cell 408-***-****, Home 408-***-****

acpvjc@r.postjobfree.com

MA N UFACTUR I NG ENG I N EER

15+ years Electrical/Mechanical/Manufacture engineering experience. Expertise in electrical

and mechanical systems designs; generate and modify electrical/mechanical system components

to improve products. E xperience in the design of AC/DC Power Distribution and manufacturing

Service to Original Equipment Manufacturers. Skill in Semi-conductor equipment engineering

experience. A dept at t roubleshooting electrical/mechanical systems. Use excellent

communication skills to direct f loor technicians and collaboration with other manufacturing and

service engineers.

PROFESSIONAL EXPER I E NCE

Plexus, I nc., Fremont 07/2011 –

P resent

Manufacture Engineer, Engineering Department.

• Work with Biotech/Medical companies to improve their products. Review the

mechanical/electrical Drawings and develop system designs.

• Work with customer design engineers to provide and recommend engineering and

manufacturing solutions relating with equipment build.

• Generate the Work I nst ruction and instruct to build customer products in

p roduction.

• Build the F i rst Article I nspection and validation and release the product build.

• Design and build the test fixtu res to implement the functional test and circuit ry

board level test requi rement.

• Lead the innovative methods to accomplish the customer goal in quality product

b uild.

• Provide hands on support to the manufacturing assembly and test processes for medical

i nstruments.

• Generate ECO (Engineering Change Order), ECR (Engineering Change

R equest), EDA (Engineering Deviation Authorization) going th rough

P roduction/Document Control process.

• I n tegrate and implement the systems with the document verification.

• Evaluate design with FA I, reliability, cost, and validation.

• Provide hands on support to the manufacturing assembly and test processes for medical

i nstruments.

• Support in production Lines to deliver the products to customers.

• Develop the manufacture process and technology strategies for new products.

• Work with Product Development during all phases of the product development cycle of

f low instrument products.

• Works on complex mechanical/electrical/system problems where analysis of situations or

data requires evaluation of various factors. Exercises judgment within broadly defined

p ractices and policies in selecting new methods, techniques, and evaluation criteria for

obtaining results.

• Determines methods and procedures on new assignments and may provide guidance to

lower level personnel.

• Design the f loor layout with Lean Sigma for production growth.

• Use M icrosoft Office, Auto-Cad, GSF, Agile, MAX, J DE.

KQ I n tegrated Solutions, I nc., Santa Clara 12/2010 –

07/2011

Manufacture Engineer, Clean Production Operation.

• Worked with Thermo Fisher Scientific’ engineers to improve their coils/coil

boxes/Mechanical Thermal Housing. Review the mechanical/electrical drawings to make

corrections to improve systems.

• Generated M P I (Manufacture P rocess I nstruction) to instruct assemblers

b uilding coils and housing assemblies.

• Tested the systems to analyze coil boxes/thermal housing and t rouble-shooting

t he coils’ design problems.

• I nst ructed the process to improve manufacture in ISO 9001.

• Generated the F i rst Article System and review an EDA (Engineering Deviation

A uthorization)/ ECR (Engineering Change Request) w ith customer.

• Created the I nspection Check L ist to increasing more products’ inspection.

• Worked as supervisor in clean room areas.

• Used M icrosoft Office and Auto-Cad.

BENTEK Corporation, San Jose 10/2006 – 12/2010

Manufacture Engineer, Production Operation.

• Worked directly with the capital equipment companies to achieve their tu rnkey

engineering and manufacturing. Built the system as New Production In t roduction.

• Created the M P I Manufactu re P rocess I nstruction helping production to build

systems.

• Leaded project and managed the time frame to build custome r’s design

p roducts.

• Modified/generated to build AC/DC power distribution and integrate systems.

• Built Fi rst Article System and make ECR/ECO documents release to Document

Cont rol.

• Created the electrical test featu res to test PCB and simulate signals of electronic

devices.

• Tested, t rouble shoot, calibrate, and stimulate systems for improvement.

• Worked in Final Test for test/trouble shoot on PCB/system release to customer.

• I nspected mechanical drawings to build system and make cor recting problems.

• Generated/modified to cor rect drawings in mechanical and electr ical models.

• Made development and implementation for Neut ronix/Quintel, Applied M icro

S tructure, Techarmonic, Ult ra-Tech, K LA-Tencor, Solyndra, Lam Research,

N ovellus, and M iasole.

• Generated drawings to help quick release document to complete system design

p ackage.

• Helped customers to wor k in ECR/ECO/BO M and organize the document

p ackages for releasing products. Create PCB Test P rocedure and System Test

P rocedure in F inal Test.

• Worked as a supervisor in clean room to build/test systems to meet custome r’s

q ualification.

• T raveled to custome r’s site to support existing problems and their products.

• Used Auto-Cad/E-drawing and M icrosoft Office for BOM/ECR/ECO/ATP

documentation.

OWEN D ES IGN, F remont, California 01/2006 –

10/2006

Production Contractor.

• Worked on electrical/mechanical modules and systems. Develop In telligence-based

controllers to fully integrated systems. Buil t AC/DC power management, control, monitor,

d istribution, supply sub-systems, and pneumatic control systems.

• In tegrated/calibrated semiconductor capital equipment in tegration and test design,

develop, and deliver cost effective AC/DC Power and Electronic/Control Signal Distribution

Assemblies to support capital manufacturing equipment.

• Detailed industry knowledge of electrical components including circuit breakers,

contactors, relays, switches, etc.

• Buil t system as double decks UV cures to baking hard disk for Seagate and a disk t ransfer

systems for Candella and K LA.

A FFY MET R IX, I NC., Santa Clara, California 5/1997 –

12/2003

Electrical Engineer I I, Engineering Department

• As sole Electrical Engineer, teamed to design in-house DNA Synthesizer, Photo-

L i thography Auto-Aligner, and Cart ridge Chip Assembly systems.

• Modified DNA Synthesis systems, including IO driver PCB, Strike Circuit PCB, Valve and

Sensor Back-plane PCB. C reated Power Distribution Controller, Valve/Sensor Boxes, and

w ire harnesses.

• Designed electrical control of Photo-L i thography Auto-Aligner systems. Generated IO

d river PCB, UV Sensor PCB, and valve/sensor backplane PCB. C reated electrical panels

w ith automatic t iming control to protect circuit ry of valves and sensors. Modified relay

panel boxes to control shutter lamp panels.

• Developed Cart ridge Chip Assembly systems. Redesigned IO driver PCB and generated

Power Distributor box controlling pneumatic and vacuum valves. Modified lamp shutter

and UV-CURE control.

• Created prototype test feature boxes to t roubleshoot IO driver PCB and harnesses, to test

t he glue and UV-CURE in tensity, and develop the f low-cell bladders materials failure.

• Ini tiated and developed prototype of M2K systems that can make 4 DNA wafers. Used

Omron PLC to control system and to test experiment. Made data analysis and managed

equipment cost reduction

• Used M icrosoft Office, Auto-Cad, ViewLogic.

•

SYSTE MS CHE M ISTRY, I NC., Santa Clara, California 5/1992 –

5/1997

Electrical Engineer, Control Department

• Worked with engineering team to design solid-state electronic controllers, and developed

associated software.

• Developed the series of pump and pressure controls of Chemical Dispense Units, Sample

S tations, and Operation Control Panels.

• Designed, verified, tested, and released process electronics controllers. Generated

schematic, wi ring diagram, and harness related to electrical equipment. B uil t prototypes,

t roubleshot PCB, and released products.

• Designed practices appropriate to electrical panel, wire way, and AC/DC electrical

power. U t ilized knowledge of relays, contactors, NEMA enclosures, electrical fit t ings,

circuit breaker, connectors, cables, and wires.

• In tegrated, installed, tested equipment, and associated software of prototype/operation.

• Developed system modeling with Mechanical and Software Engineers to provide Chemical

D ispense Uni t required for customers.

• Used M icrosoft Office, Auto-Cad, Tango Schematic.

E D UCAT ION

U N IVERSITY OF CENTRAL FLORIDA, Orlando, Florida 8/1987 – 12/1991

Bachelor of Science in Electrical Engineering

C I T IZE NSH I P

US Citizen

Contact this candidate