Engineer High School
Resume:
Bernie A. Fernandez
Address : Purok Thunder, Timpolok, Babag,
Lapu-lapu City, Cebu, 6015 Philippines
Mobile No. : +639*********
Email : acph82@r.postjobfree.com
:bernz_fernandez
Skype
PERSONAL DATA:
Age : 38 Years Old
Birthday : April 15, 1976
Sex : Male
Civil Status : Married
Religion : Roman Catholic
Height : 165 cm.
Weight : 70 kg.
Nationality : Filipino
Willing to Relocate : Yes
I am an Electronics Engineer with experience in Material Handling, PCB Assembly Manpower
Supervision, Electronics Board Repair/Troubleshooting/Test and Instrumentation.
My most recent experience is in Instrumentation & Control Service, Industrial Test and Repair. In
my 14 years of experience, I had travelled to countries like Taiwan, Japan and USA for various reasons
like working, training and business meeting.
SUMMARY OF QUALIFICATIONS
Ability to read and understand P&ID drawings.
Technically proficient in troubleshooting and repair Electronics circuit boards down to component
level.
Ability to troubleshoot instrumentation and electrical related problems in the field.
Installation/fixing/dressing of multi-core and single pair cables.
Calibration and re-ranging of smart transmitters/field instruments.
Wiring termination of field instruments from smart transmitters & sensors in junction boxes and
marshalling cabinet.
Responsible in performing predictive and preventive System Maintenance and Calibration.
Technically proficient in Electronics and Electrical troubleshooting of equipment.
Knowledgeable in computer installation and troubleshooting.
Proficient in soldering and de-soldering of discrete and SMD type of components.
Proficient in Microsoft Office (Word, Power Point and Excel).
Ability to make and present report.
Ability to do PCB Assembly rework and repair.
Knowledgeable in IPC-A-610 standard (PCB Assembly Inspection and Acceptable Criteria)
Knowledgeable in Project Management.
Experience in Industrial Charger Installation and Commissioning.
Ability handle/lead a group of technical people.
Ability to interface people of different level of the organization.
OVERSEAS EXPERIENCE
Company State/Country FROM TO PURPOSE
Lead the group of six repair
Nextest San Jose, 10/30/2009 6/1/2010 technician for Productionand
Systems Inc. California Engineering Support for Magnum
2 and 2X testing and assembly.
Established a rework procedure for
Magnum2and 2X Pin Electronic
Module rework.
Interfaced with Proworks USA for
the Pilot run and implementation of
the Pin Electronic Module rework
process.
Responsible for the team’s
administrative needs such as
accommodation and
transportation.
Technical training for Nextest
Nextest San Jose, 1/2/2007 2/26/2007 Magnum 1 Board Repair in
Systems Inc. California preparation for the repair process
transfer from San Jose, California
to Makati, Philippines
Responsible in repairing of
defective Device UnderTest (DUT)
Power Supply module.
Responsible in repairing, testing,
calibration and performance
verification for DPS module.
Technical training for Teradyne
Teradyne North Reading, 10/1/2005 1/24/2006 Flex VHFAC Board Repair in
Massachusetts preparation for the repair process
transfer from North Reading to
Cebu.
Responsible in repairing, testing,
calibration and performance
verification for VHFAC instrument
board.
Technical training for Fujitsu’s
Fujitsu Ten Ltd. Japan 4/9/2002 4/24/2002 Minidisc Repair in preparation for
the assembly process transfer
from Kobe to Cebu.
Responsible in repairing and
calibration of MDS testing
equipment.
Business Meeting for preparation
Fujitsu Ten Ltd. Japan 7/15/2001 7/19/2001 of Minidisc PCB Assembly Process
transfer from Kobe to Cebu.
Working in Acer’s laptop assembly
Acer Inc. Taiwan 11/16/1999 2/18/2001 line.
Responsible in controlling
material’savailability for production
line.
Forecast material’s weekly needs.
Total Experience:
Abroad : 3 years
Local : 12 years
EMPLOYMENT EXPERIENCE
Company: Broadband TelCom Power
c/o Precision Microciruits Inc.
Mepz1, Lapu-lapu City, Cebu, Philippines
Period: November 3, 2014 to Present
Position: Test Engineer
Involve in failure analysis on newly built assembly of BTC charger.
Involve root cause investigation of failing board assembly.
Supporting troubleshooting of failing HPE in line testing.
Formulate testing methods.
Initiate improvement projects.
Company: Self - Employed
Period: February 15, 2012 to October 30, 2014
Involved in Residential Electrical Wiring Installation.
Involved in Installation and Commissioning of Industrial Charger (Benning Charger)
Involved in project based Magnum Site Assembly Repair.
Company: Presidium Controls & Industrial Technologies Corporation
3rd Floor Dispo Bldg. AC Cortes Avenue, Mandaue City, Philippines
Tel: +63-32-346****/ 3440467
Period: February 1, 2012 to February 15, 2014
Position: Instrument Engineer
Responsibility:
Involved in calibration and re-ranging of smart transmitters/field instruments.
Prepared instrument installation/termination schedule.
Prepared work progress report.
Involved in layout and installation/fixing/dressing of multi-core and single pair cables.
Involved in termination of field instruments.
Involved in termination of multi-core and single pair cable to Instrument Junction Box.
Involved in termination of multi-pair cable to Instrument System Cabinet.
Involved in loop-checking and continuity testing of instruments based on prepared loop
drawingpackages and schedule.
Company: Teradyne Philippines Ltd (and its subsidiary)
MEPZ 2, Basak, Lapu-lapu City, Cebu, Philippines
Tel: +63-32-340****
Period: December 1, 2003 to January 31, 2012
Position: Test Engineer
Responsibility:
February 2009 to January 2012 (Test EngineerNextest Business Unit)
Evaluate failure of“under warranty” boards for Nextest’s Test System.
Submit report to US Engineering and local management about findings, corrective measures and
counter measures to prevent re-occurrence of failure.
Initiated Engineering Change Orders for standard implementation of proven working changes to
Instrument boards or process.
Evaluate possible replacement component to an obsolete part in the market.
Formulate working procedures for repair process standardization, system maintenance, system
calibration andwork instruction.
Responsible for equipment and system’s periodic calibration.
Generate/Present report to local and regional management about Product Quality, Product
Performance and Major Issues in a quarter.
November 2006 to February 2009 (Lead Repair Technician – Nextest System Philippines)
Responsible in repair of defective Maverick and Magnum instrument boards.
Responsible in repair of defective Power Supplies for Magnum and Maverick Testers.
Responsible in calibration of Instrument Board and Power Supply.
Responsible in allocation of man power and resources to support repair requirements such as
spare parts, tools, equipment and consumables inventory.
Provide weekly report to Department Manager about repair performance such as yield rate and
major issues that affects team’s performance.
Interface with US’ Engineering team for collaboration for board reliability related issue.
Allocate system time for periodic system maintenance and calibration.
December 2003 to October 2006 (Board Repair Specialist Teradyne Philippines Ltd.)
Evaluate and repair defective instrument boards of Teradyne’s A300 Tester.
Evaluate and repair defective instrument boards of Teradyne’s MicroFlex VHFAC option.
Responsible in calibration and performance verification of repaired instrument board.
Responsible in preventive system maintenance and system calibration.
Company: Muramoto Audio-Visual Philippines Inc.
Mactan Economic Zone, Lapu-lapu City, Cebu, Philippines
Period: May 2, 2001 to November 30, 2003
Position: Production Engineer
Responsibility:
Supervise PCB Assembly Section for its daily workload and schedule to make sure that plan
schedule is strictly followed.
Allocate resources for PCBA section to fulfill its target in terms of its productivity and quality.
Responsible in training of repair technician and operators to equip them the right knowledge to
perform their assigned task in production line.
Implement KAIZEN projects to improve yield rate and process efficiency.
Formulate working procedures for process standardization and work instruction to make sure that
every finished product have the same quality.
Company: Acer Inc.
7 Hsin Ann Road, Science-Based Industrial Park,
Hsinchu 300, Taiwan, R.O.C.
Period: November 16, 1999 to February 22, 2001
Position: Production Staff
Responsibility:
Responsible of raw material’sinventory and supply in Laptop Assembly Line to avoid production stoppage.
Support in repairing of defective Laptop Assembly to augment output of assembly line to cope up with the high
demand of laptop.
Support quarterly inventory in main warehouse to make sure that everything is accounted for proper monitoring.
Floor Leader in Male’s dormitory section to overlook the house keeping rules to maintain its cleanliness all
throughout the dormitory for the good of the worker and company.
EDUCATIONAL BACKGROUND:
COLLEGE 1993 to 1998 BS in ELECTRONICS AND COMMUNICATIONS
ENGINEERING
University of San Jose-Recoletos
Cebu City, Philippines
HIGH SCHOOL 1989 to 1993 HIGH SCHOOL
Valladolid National High School
Valladolid, Carcar, Cebu, Philippines
TRAININGS
INDUSTRIAL INSTRUMENTATION WITH XPOWER PC CONFIG
CALIBRATION Javasphere Computer Learning Center
Metrologyx Industrial Instrumentation Training Center Gen. Maxilom Avenue, Cebu City Philippines
Mandaue City, Cebu, Philippines
LOG OUT & TAG OUT TRAINING
Teradyne Office
Lapu-lapu City, Cebu, Philippines
SEMINARS
TOTAL QUALITY MANAGEMENT TOTAL QUALITY MANAGEMENT
TOOLS & CONCEPTS 9-STEP WORKSHOP
Teradyne Office Teradyne Office
Lapu-lapu City, Cebu, Philippines Lapu-lapu City, Cebu, Philippines
TOTAL QUALITY MANAGEMENT A360/A370 TEST SYSTEM
7-STEP WORKSHOP MAINTENANCE
Teradyne Office Teradyne Office
Lapu-lapu City, Cebu, Philippines Lapu-lapu City, Cebu, Philippines
IPC-A-610 ACCEPTABILITY OF PROJECT MANAGEMENT TOOLS
ELECTRONIC ASSEMBLIES AND WORKSHOP
Teradyne Office Teradyne Office
Lapu-lapu City, Cebu, Philippines Lapu-lapu City, Cebu, Philippines
TEAM EXCELLENCE TEAM KAIZEN PHASE II
Silot Bay, PoblacionLiloan, Maple 2 Conference Room,
Cebu, Philippines MEPZ I, Lapu-lapu City, Cebu, Philippines
CHARACTER REFERENCE(S)
Engr. Jopriz Zamora Mr. Melvin Gerona
Proprietor Sales Engineer
Metrologyx Training and Assessment Center Inc. GLOBALTECH ENTERPRISE
Mandaue City, Cebu Lapu-lapu City, Cebu
Contact this candidate