Sidney O. White, II

Letter **** Anita Drive

of Intent Parma Heights, Ohio 44130

440-***-****

acpd44@r.postjobfree.com

Please accept this letter and the enclosed resume as my

? expressed interest in securing a position with your corporation

in a capacity that will most effectively utilize my specialized

skills, formal training and certification, and extensive

I am seeking experience in all facets of quality control inspection and

a role in an non-destructive testing.

environment

that As my resume reflects, I have built a solid foundation in my

encourages chosen field not only through my role a Certified

independent Non-Destructive Test Level II Inspector with a world leader in

decision-makin the design, manufacture, and integration of complex metal

g components and products, but also through my diverse and

and demands well-rounded experience as a Quality Control and Certified

both Non-Destructive Test Level II Inspector contracted for special

professionalis projects with corporations and power plants throughout the

m and country. As a professional inspector certified in various areas

flexibility. of testing, my years of experience encompass all facets of

performing Magnetic Particle, Radiographic, Visual, Mechanical,

? Dimensional, Liquid Penetrant, and Electrical inspections.

I am a disciplined, safety-oriented, highly-motivated

professional interested in exploring opportunities where I can

continue to utilize my experience, training, and talent to

contribute to the success of an established organization. I am

confident my diverse skills and proven experience would be an

asset to your team. I would welcome the opportunity to speak

with you, in person, to discuss my particular qualifications

and goals.

Thank you for your attention, consideration, and forthcoming

reply.

Sincerely,

Sidney O. White, II

Enclosure

Sidney O. White, II

Professional 6470 Anita Drive

Profile Parma Heights, Ohio 44130

440-***-****

page 1 of 3 acpd44@r.postjobfree.com

Objective To secure a rewarding position where my extensive and diverse

experience in quality control inspection and nondestructive

testing, combined with my exceptional work ethic and commitment

to safety will be fully employed to deliver professional

results and desired outcomes.

Highlights

Professional background includes success, formal training,

well-rounded experience, and skills in:

?Quality Control Inspection and Nondestructive Testing:

?All facets of performing Magnetic Particle, Radiographic,

Visual, Mechanical, Dimensional, Liquid Penetrant, and

Credentials Electrical inspections for various environments and industries,

including: aerospace, defense, manufacturing, and nuclear power

plant construction and in-service/outage modifications

?Adherence to NAS-410 A.N.S.I, N45.2.6 ASME Section XI,

SNT-TC-1A Level II standards ?Familiarity with ASME, API, AWS,

ASTM, and 10 CFR 50

Experience ?Trained & certified in accordance with

NAS-410 A.N.S.I., N45.2.6 ASME Section XI, and SNT-TC-1A Level

II

?Liquid Penetrant Testing II Certified MAGNAFLUX CORPORATION

Hartford, Connecticut

?Magnetic Particle Testing II Certified MAGNAFLUX CORPORATION

Hartford, Connecticut

?Radiographic Testing II Certified MAGNAFLUX CORPORATION

Boston, Massachusetts

?Visual Testing I-IV Certified EPRI JONES APPLIED RESEARCH

Charlotte, North Carolina

?Turbine Training MAGNAFLUX CORPORATION Minneapolis, Minnesota

?Remote Visual Training REACTORS INTERNALS Nine Mile #1

Team Industries

Wood River, Illinois? 2014

Certified MT & PT

Performed PT inspections on OD welds on bellows and MT on fan

blades for boiler drums

Wyman Gordon

Cleveland, Ohio ?2007-2013

Certified Non-Destructive Test Level II Inspector

Recruited by this global leader in the design, manufacture, and

integration of complex metal components and products to set up

and standardize equipment, conduct tests, interpret and

evaluate test for acceptance or rejection and document test

results.

? Perform repetitive types of magnetic particle or liquid

penetrant non-destructive tests of raw

forgings and finished products both in-process and during final

inspection.

? Develop written instructions from approved general procedures

by the responsible Level III

Inspector.

? Demonstrate knowledge of codes, standards, and other

contractual documents that control the

method utilized.

? Generate a Discrepancy Report if indications are rejectable.

? Apply inspection stamp as required.

? Ensure all inspections are in accordance with

Military-Standards (MIL-STD-410), National

Aerospace Standards (NAS-410), and CNDTQ.

Professional Sidney O. White, II

Profile 440-***-****

acpd44@r.postjobfree.com

page 2 of 3

Experience

continued Various Contracts

Cleveland, Ohio ?10+ years

Quality Control and Certified Non-Destructive Test Level II

Inspector

As a Certified Inspector in various specialized areas, embraced

the opportunity to utilize skills at a myriad of facilities on

a contractual basis. While assignments and environments were

diverse, was always ultimately responsible for consistently

demonstrating an ability to make independent decisions and

handle a great deal of autonomy while working as an integral

member of an organization's team. Throughout the years

assignments included:

?International Gear Company (12 months) ~ performed MT and PT

inprocess and final

Nital Etch inspections on McDonnell Douglass and Sikorsky

aerospace gears for

tempering and rehardening, as well as Rockwell readings for

case in core, and core in case.

?Kewaunee Nuclear Power Plant (2 months) ~ performed 79-14

walkdowns and inprocess

welding on modified supports and new installations. Assisted

with reactor internal

removal, manway removal and installation, RTD installation, and

torqueing of reactor

cooling pump.

?Nine Mile Point #1 Nuclear Power Plant (8 months) ~ performed

ISI inspections, VT 1

and 3 remote Visual Exams of reactor internals, V 2 system leak

exams, VT 3 and 4 exams

of installed supports.

?Grand Gulf Nuclear Power Plant (5 months) ~ performed

inspections on component

supports, including: hydraulic and mechanical snubbers, rigid

struts, and spring cans. In

addition, did routine inspections for preventative maintenance.

?Fort Calhoun Nuclear Power Plant (5 months) ~ for 3 months

during this nuclear power

plant's maintenance and refueling outage, performed inspections

of wire splicing, FHA

relays, switches, meggering, cable pulls and routing, torquing,

and grouting. In addition,

did inspections on welding of seismic supports, pumps, valves,

and breakers; performed

hydrostatic pressure testing. Contracted on a later date to

perform routine inspections on

inprocess welding, operability of breakers, and preventative

maintenance.

?Clinton Nuclear Power Plant (9 months) ~ as a result of

successfully finding the

locations of socket welds from various drawings and systems,

performing PT tests, and

accurately and thoroughly creating reports and sketches during

new construction, was

hired back to verify inspections of mechanical maintenance

activities on pumps, valves,

bolted connections, and hangers. Coordinated with startup on

hydros and pneumatic

testing. In addition, performed document review and documented

results of inspections on

appropriate forms.

?Bath County Pumped Storage Project (2 months) ~ worked in

underground tunnels

observing, inspecting, and documenting the drilling of holes.

Performed water tests to

determine their lugent values of each hole. Further, witnessed

the pressure grouting of the

holes at various P.S.I. grout ratios.

?Perry Nuclear Power Plant (15 months) ~ during new

construction of this nuclear power

plant, performed NDE on containment structure in compliance

with AWS and ASME

specifications. Contracted at a later date to perform first

line visual welding and

mechanical inspections of installations of pipe supports and

hangers and to verify

dimensions and documentation for the Field Hanger Report

Dimension Program.

Professional Sidney O. White, II

Profile 440-***-****

acpd44@r.postjobfree.com

page 3 of 3

?James A. Fitzpatrick Nuclear Power Plant (4 months) ~

Experience performed mechanical

continued verifications and inspections of RHR systems, Torus attached

piping, valves, pipe

supports, and Hilti bolt installations.

?Port St. Lucie Florida Nuclear Power Plant (8 months) ~

involved with Hot Operational

Test of the reactor and related systems. Read various prints and

prepared inspection

reports. Inspected pipe bends of all class piping; checked the

angle, ovality, and thickness

of bend; in addition, performed a PT on the bend area of the

pipe.

?Rancho Seco Nuclear Power Plant (2 months) ~ performed PT, VT,

and mechanical

level II inspections. Jumped generators to inspect generator

tubes. Verified torquing of

manways. Performed PT and VT on auxiliary feedwater lines.

Performed TMI

modification Hydros, torquing of riser to ring headers, and

visual inspection of hangers.

?Hanford #2 Nuclear Power Plant (12 months) ~ performed QC

inspections (NDE) and

Additional VT on weldments and fabrications, repair work, reviewing

Info documentation, surveillance,

walk downs, and thickness measurements with D-meter

specifications. Worked on all

systems in containment.

?San Onofre Nuclear Generating Station #1 (5 months) ~ during

maintenance outage of

this nuclear power plant, performed QC responsibilities under

subcontract to Westinghouse

during Tube Sleeving Project to the steam generators. Performed

remote visual inspections

utilizing video equipment during sleeve insert expansion, hard

rolling, and brazing.

Conducted receipt inspections and mandrel loading and

surveillance. Assisted in the

Documentation Control Center. Performed PT and VT inspections

inside the steam

generators for tube plugs.

?Peabody Testing (22 months) ~ performed outage inspections to

turbines and other related

components in fossil and nuclear power plants. Performed RT on

turbines and boiler

drums, field welds, nuclear submarines escape hatches, heavy

wall castings. Completed

NDE on engine parts, airplane parts, and control drive rods.

Professional & Personal Skills:

?Excellent work ethic. ?Dependable. ?Detail-oriented. ?Flexible.

?Able to prioritize and juggle numerous projects simultaneously

and follow through to their fruition. ?Self-starter. ?Excellent

verbal and written communication skills. ?Committed to exceed

client/corporate expectations. ?Safety-focused.

Other Experience:

Machine Set Up Specialist and Operator, KEYSTRONE THREADED

PRODUCTS

Personal Data:

?Interests: fishing, sports, and spending quality time with my

family. ?Willing to travel.

Contact this candidate