Jonathan F. Guinto
***** ********* ***. *********, ** 90723
Phone: 562-***-**** Home / Cell: 310-***-****
E-mail: acp2q4@r.postjobfree.com/acp2q4@r.postjobfree.com
www.linkedin.com
Objective
30 years of experience in MAINTENANCE / ENGINEERING / OPERATION
27 years of experience as OUTSIDE MACHINIST INSTALLATION / REPAIR
27 years of experience as AXUILIARY-EQUIPMENT Mechanic / Operator
High performing maintenance engineer, adept in planning, evaluating and diagnosing routine upkeep of equipment, machinery and systems in the production area demonstrating the following core skills:
Accuracy – Attention to minute details.
Good problem solving and analytical abilities.
Excellent communication and interpersonal skills.
Ability to work in a team environment.
Designed and implemented special strategies related to maintenance procedures.
Performed routine maintenance inspections of equipment to identify and respond to problems in a timely manner, thus preventing breakdowns.
Provided solutions and fixed equipment malfunctioning, system faults and network errors
Assigned personnel and technical support teams to sites requiring 24/7 maintenance.
Utilized different reliability and testing strategies in plants to maintain and improve operation’s profitability.
Directed storage of equipment and assured safety measures were followed
Professional Achievements
CERTIFICATION 2009, SWEDEN: RR MARINE SKF TRAINING:
1. GRL001 Lubrication 11. WI130 Thermography Basics
2. GRPT01 Power Transmission 12. MS101 Assessment Basics
3. PT01-MCA SKF Machine Condition Advisor 13. WI140 Lubrication Analysis Basics
4. WE170 Basics of Seals for Rotating Motion 14. GRB001 Bearing Basics
5. WE140 Shaft Alignment Basics 15. GRB002 Spherical Roller Bearings
6. WE150 Balancing Basics 16. GRB004 CARB Toroidal Roller Bearings
7. WI100 Vibration Basics 17. GRB005 Tapered Roller Bearings
8. MS100 Introduction to Asset Efficiency Optimization 18. BGR003 Angular Contact Bearings
9. MS120 Operator Driven Reliability 19. GRB006 Deep Groove Ball Bearings
10. MS130 Maintenance Strategy Review
CERTIFICATION TRAINING ROLLS ROYCE MARINE OEM FACTORY TRAINING:
1. “Kamewa, Control Pitch Propeller (CPP), Control System, Water Jet and Thruster - Level 1.
November 2009, Kristineham, Sweden.
2. “Kamewa, Control System (Newman/Canman2) – Level 2. May 2010, Kristinehamm, Sweden.
3. “Rauman/Brattvaag Deck Equipment Familiarization Level l,” Frequency Drive Motor (Rauman Finland), “High Pressure Motor (Rauman Finland), “Low Pressure Motor (Brattvaag Norway). November 2010.
CERTIFICATION TRAINING: ROLLS ROYCE MARINE COMPANY POLICIES TRAINING:
1. Health Safety and Environment Passport for Off-Site Workers. March 10, 2009
2. ETHICS: Harassment in the Workplace. June 12, 2009
3. Export Control and Customs Compliance 2009. June 12, 2009
4. General Employee Security Briefing 2009. June 12, 2009
5. Everyday Ethics ll. June 23, 2009
6. Risk Management during Lifting Operations for HSE Professionals and lifting Champions. March 19, 2010
7. Information Security Overview. June 10, 2010
8. General Employee Sec urity Briefing. June 10, 2010
9. Export Control and Customs Compliance. June 10, 2010
10. Gifts and Hospitality – Introduction. October 12, 2010
OTHER CERTIFICATION TRAINING COMPLETED:
Computer Hardware A+ Core, Welding (TIG, MIG, Plasma Cutter, and Stick), Rigging Heavy Equipment
First Aide, Fire Fighting, Watch Keeping
Work History
Job Title: Maintenance Operating Engineering
Shasta Beverages
14405 E. Artesia Blvd., La Mirada, CA 90638
13 October 2014 to Present
Key Duties & Functions
Maintained the optimization operation of Bottles and Cans lines.
Change/Over Bottle and Can lines the Fillers, Conveyors and label/Printer equipment’s.
Performed routine preventive maintenance inspections and assessment of equipment to identify and respond to problems in a timely manner, thus preventing breakdowns.
Operated and troubleshoot all automated with Allen Bradley PLC processor equipment with attached input Micro &, Proximity switches, Photo sensors.
Job Title: Assistant Chief Engineer
Safeway Vons (Los Angeles Milk / Culture Plant)
1366 Boxford Ave., City of Commerce, CA
3August 2011 to 19 July 2014
Key Duties & Functions
Performed routine preventive maintenance inspections and assessment of equipment to identify and respond to problems in a timely manner, thus preventing breakdowns.
Conducted repairs and upgrade on boilers compressors (Air and Ammonia), Plastic Gallon Blow Mold Machines, Fillers Gallon, Fillers CB, Casers, Stackers, Cable conveyors, Chain conveyors, Palletizers and Case washers
Operated all automated with Allen Bradley PLC processor equipment with attached input Micro &, Proximity switches, Photo sensors.
Job Title: Field Service Engineer
Rolls-Royce Commercial Marine, Signal Hill, CA
22 December 2008 to 15 June 2011
Key Duties &Functions
Provided on-site repair and preventative maintenance
Conducted installation, modification implementation and sales support on all OEM products.
Administered all regulatory policies, and goals are met.
1.Maintained customer relations and insure customer satisfaction with service of the following: (a) RR OEM products Commissioning, Repair, Installation (b) Upgrade all type of Marine Propulsion Engine- Auxiliaries
2. Various Thrusters UUS 7001 to 6001 series by AquaMaster
3. “Kamewa, Control Pitch Propeller (CPP), Water Jet
4.Thrusters and Control System (Newman/Canman2 Control)
5.Steering Gear Units (Tennfjord &/Frydenbo) and Hydraulic Power Pack System, Offshore and on board Vessel.
Job Title: Maintenance Electro / Mechanical Tech.
Wavefront Technology, Paramount, CA
10 May 2004 to 19 December 2008
Key Duties &Functions
Repair, Installation and Upgrading various plastic production equipment
In charge of operation of Metalizer machine for manning operation upgrading auxiliary attachment (PLC, Micro-Cell, High Vacuum and Chiller system).
Job Title: Maintenance Electro/Mechanical Tech.
California PlasticCard INC., Los Angeles, CA
December 2002 to May 2004
Key Duties &Functions
Installation / Repair / Preventive Maintenance various Equipment / Machines use for Manufacturing. Plastic Smart cards Banks use and Outlet stores.
Run conduit/wiring 110,220,480v. Troubleshoot motors with AC / DC power with electronic board (CPU- I/O, motor drive board slot) upgrade PLC systems.
Job Title: Maintenance Electro/Mechanical Tech.
Sodexho USA, West Los Angeles, CA
February 2000 to January 2004
Key Duties &Functions
Responsible for installation, repair, and preventive maintenance.
Maintained the optimization operation of Industrial laundry equipment
In charge of *Automated conveyors with photo sensors, Robotics system, Tunnels Washer run by CPU chip and electronic boards, Ironers/Folders programmable with PLC system.
Job Title: Journeyman outside Machinist/Electrician
Guam Shipyard/Naval SRF, Santa Rita, Guam
January 1997 to December 1999
Key Duties & Functions
Accomplished major Ship repair, installation and maintenance of Steam Turbine / Fuel. Turbine Engine Propulsion system
Conducted upgrade of various heavy equipment and control system
Performed mechanical / electrical upgrade metal platform cranes, booms, winches, mobile heavy rigs. Hydraulic (valves and equipment).
Implemented extensive repair of Waste Heat Boiler, Conducted weight hydro test.
Job Title: Lead Journeyman outside Machinist/Electrician
XenoMarine, Norfolk, VA
March 1989 to December 1996
Stations: SRF San Diego, CA, Sasebo Japan, Philippines, Singapore working onboard U.S.S. and USNS MSC Ships various class
Key Duties &Functions
Installations, repair, upgrade Engine Propulsion, and Control system.
Hoisting heavy equipment (Cranes / Booms Jig).
Installation upgrade Radar and Command Station *combat room*.
Installation and upgrade various types of hydraulic and electrical deck machineries and including vessel Pins Stabilizer.
EDUCATION:
MCSE (Microsoft Certified System Engineer 2000-2002), BSME Marine Engineering (1973-1977), 15 years served on board Merchant Vessels as Engineer.
CA Driver License C (passenger car)
References are available on request.