James Reynolds

James Reynolds

502-***-****,Cell)

**** **** ****** # *

Louisville, KY 40215

acowya@r.postjobfree.com

Professional Summary

I have 29 years of experience, including as a Journeyman Pipefitter, Electrician, and 2 years as a

Hvac Techician with industries including Construction Special Trade Contractors, Building

Construction General Contractors and Operative Builders. Most recently, I have been working as a

Journeyman Pipefitter at Ward Engineering Corporation from June 2013 to August 2013.

My skills and experiences include: SMAW (stick welding), Electrician, Hvac, Pipefitting, Layout,

Robotics, Schematic Diagrams, Switches, Troubleshooting, Wiring, Materials Management.

Schardine Mechanical 06/14 to Present

Journeyman Pipefitter/welder

Supported pipe systems and related hydraulic and pneumatic equipment for systems such as

steam, hot water, heating, cooling, lubricating and sprinkling.

• Measured and marked pipes for cutting and threading.

• Cut openings for pipes in structures such as bulkheads, decks, walls and mains.

• Installed pipe supports such as clamps, brackets and hangers.

• Assembled and secured pipes, tubes and fittings.

• Operated equipment for welding, brazing, cementing, soldering and threading.

• Cleaned and maintained pipe systems.

• Carried out tests To control and measure variables such as pressure, flow, temperature,

motion and force.Also became efficient in : SMAW (stick welding).

Ward Engineering Corporation, Louisville KY 06/13 to 06/14

Journeyman Pipefitter/welder

Supported pipe systems and related hydraulic and pneumatic equipment for systems such as

steam, hot water, heating, cooling, lubricating and sprinkling.

• Measured and marked pipes for cutting and threading.

• Cut openings for pipes in structures such as bulkheads, decks, walls

and mains.

• Installed pipe supports such as clamps, brackets and hangers.

• Assembled and secured pipes, tubes and fittings.

• Operated equipment for welding, brazing, cementing, soldering and

threading.

Bowen Engineering Corporation, Indianapolis IN 03/12 to 08/12

Journeyman Pipefitter/welder

• Measured and marked pipes for cutting and threading.

• Cut openings for pipes in structures such as bulkheads, decks, walls

and mains.

• Installed pipe supports such as clamps, brackets and hangers.

• Assembled and secured pipes, tubes and fittings.

1

James Reynolds

• Operated equipment for welding, brazing, cementing, soldering and

threading. My accomplishments included Certification in Fiberglass

Weld/Bonding, and completion of Osha 10-Hour Construction Industry

Certification.

KBR INTERNATIONAL, HOUSTON, TX 06/11 to 12/11

Hvac Technician

Gained valuable experience in all aspect of the construction industry

providing pipe fitting, HVAC and plumbing functions to new residential,

pre-existing, and military construction projects on Military bases.

Routinely utilized skills in HVAC installations, repair, brazing and

soldering, and refrigerant recovery on military bases.

Completed both Pipe Fitter and HVAC practices in maintaining

military base.

JOHN E. GREEN MECHANICAL CONTRACTOR, HIGHLAND PARK, MI

03/11 to 05/11

Journeyman Pipefitter/welder

• Supported systems and related hydraulic and pneumatic equipment for

systems such as steam, hot water, heating, cooling, lubricating and

sprinkling.

• Measured and marked pipes for cutting and threading.

• Cut openings for pipes in structures such as bulkheads, decks, walls

and mains.

• Installed pipe supports such as clamps, brackets and hangers.

• Assembled and secured pipes, tubes and fittings.

• Operated equipment for welding, brazing, cementing, soldering and

threading.

DYNCORP INTERNATIONAL, HOUSTON, TX 12/10 to 03/11

Electrical Journeyman / Labor Manager

• Supervised workers

• Assigned staff duties based on need

• Solved work-related problems

• Reviewed work to ensure proper completion

• Explained work orders to lower-level staff

• Notified departments of prob

10/09 to 12/10

KBR International, Houston, TX

Electrical Journeyman / Labor Manager

Installed and maintained electrical equipment. Installed and repaired electrical equipment such as

circuit breakers, heating units, conduit systems, fixtures, wall sockets, plugs and switches.

Performed preventative maintenance. Used test devices such as ohmmeters, voltmeters,

ammeters and test lamps. Planned layout and installation of electrical systems. Inspected

electrical systems. Cleaned and maintained tools and electrical components. Used personal

computers. Complied with all local codes, NEC, safety procedures, OSHA, EPA, waste handling

rules and job specs. Experienced with cable trays, switchgears and terminations. Experienced

with word processing software. Certified as General Journeyman Electrician.

LOUISVILLE FORD MOTOR TRUCK COMPANY, LOUISVILLE, KY

04/99 to 10/09

MAINTENACE PIPEFITTER

Supported pipe systems and related hydraulic and pneumatic equipment for systems such as

steam, hot water, heating and cooling. Worked with others to develop production strategy. Set up

work site. Measured and marked pipes for cutting and threading. Cut openings for pipes in

structures such as decks, walls and mains. Installed pipe supports such as clamps, brackets and

hangers. Operated equipment for welding, brazing, cementing, soldering and threading. Inspected

work for quality.

2

James Reynolds

SKILLS

Inspected, troubleshoot, test maintain, calibrate, overhaul, and repair plant instruments, circuits,

meters, recorders, electronic, and pneumatic controls "Served on a project crew responsible for

demolition and set up of new robotics facility .

PIPEFITTERS LOCAL 502 - VARIOUS EMPLOYERS (HIRING HALL), LOUISVILLE, KY

Journeyman & Apprentice

01/92 to 03/99

Supported pipe systems and related hydraulic and pneumatic equipment for systems such as

steam, hot water, heating and cooling.Worked with others to develop production strategy. Set up

work site. Measured and marked pipes for cutting and threading. Cut openings for pipes in

structures such as decks, walls and mains.

" Completed both Pipe Fitter and HVAC Apprenticeships.

POSITIVE ELECTRIC CO., LOUISVILLE, KY

06/86 to 01/91

Journeyman & Apprentice

Installed and maintained electrical equipment. Installed and repaired electrical equipment such as

switchboards, circuit breakers, heating units, conduit systems, fixtures, wall sockets, plugs and

switches.Performed preventative maintenance.Planned layout and installation of electrical

systems.Inspected electrical systems.

ACE ELECTRIC CO, LOUISVILLE, KY 02/85 to 09/86

Electrical Apprentice

Helped electricians. Performed semi skilled electrical duties. Furnished electricians with

materials, equipment, tools and supplies. Diagnosed problems. Took apart defective electrical

equipment. Traced short circuits in wiring. Measured wire and conduit. Maintained tools, vehicles

and equipment. Drilled holes for wiring. Stripped insulation from wire ends. My accomplishments

included: Independent Electrical Contractors Association/ Louisville, KY

Positive Electrical Companies (1986-1991) and ACE Electrical (1985 -1986). Certified in Ind.

Electricity

Education

1982 Central High School :Lou KY

High School Diploma: Ind. Electricity Certificate

1982 Ahrens Vocational School:Lou KY

Ind.Electricity

1984 Jefferson State Vocational School,Lou KY

Ind.Electricity

1989 Jefferson State Vocational Techincal School, KY

Ind.Electricity (4-yr Apprenticeship)

1997 Pipefitters Local 502,Lou KY

Ind.Pipefitter Certificate: Ind. Pipefitting (5-yr Apprenticeship)

1997 Pipefitters Local 502, Lou KY

Hvac Technician: HVAC Journeyman

2014 KNIGHTS SCHOOL OF WELDING

Certificate: SMAW(STICK) and GMAW (MIG) WELDING 2014; AWG/CWI

CERTIFICATION # 09011251(QC EXP.1/1/2015)

Licenses

Kentucky Class D/Regular Operator

Certifications

Certificate: Journeyman Electrician from I.E.C.A.Contractors Association 1989;

Kentucky

3

James Reynolds

Certificate: Journeyman Pipefitter, Pipefitters Local 502 1997; Kentucky

Certificate: Journeyman Hvac, Pipefitters Local 502-****-****; Kentucky

Certificate: OSHA 10-HOUR CONTRUCTION INDUSTRY

Certificate: SMAW(STICK) and GMAW (MIG) WELDING 2014; AWG/CWI

CERTIFICATION # 09011251(QC EXP.1/1/2015)

Certificate: TWIC-CARD

Certificate: Blueprint reading Certification

Skills

Languages Spoken : English

Blueprint Reading, Cabling, Electrician, Grinders, Iso, Layout Design,

Leadership,Quality, Robotics, Safety, Schematic Diagrams,Strategic,

Switches, Troubleshooting, Welding, Wiring, Electronics, Materials

Management, Repair, Fork-Lift & Back -Hoe Licenses Backhoe, Forklift

Operator

4

Contact this candidate