PERSONAL INFORMATION

Family Name & First Name FLORIN RADUCAN

Independentei Bld,No.85,Bl.C2,Sc.

Address, Zip Code, City,

A,Etj.2,Ap.6,Zip No.905600,Medgdidia City,

Country

Constanta County, Romania

Telephone +407******** :

Mobile +407********; +407********

acouan@r.postjobfree.com

E-mail & Web acouan@r.postjobfree.com

acouan@r.postjobfree.com (florin.raducan3)

Citizenship Romanian

Date of birth March the27,1965

Marital Status Married

Military Service Obligation Fulfilled

WORK EXPERIENCE

Date (from – to) 1985-1999

Name of company I.A.M.S.A.T. Bucharest, Romania

Energetic Sector(Nuclear Power Plant- Cernavoda

Type of business or sector

Unit1and Unit 2)

Occupation or position held Electrician Technician( commissioning)

Electrical installations for low voltage systems, electrical

Main activities and connections in electrical panels in high and low voltage

responsibilities installations, maintenance and handover work at NPP

Cernavoda U1and U2.

Installing, commissioning and remedying the damages

Short description of

various automation systems. Installation and

equipment on drilling or

configuration of system components Precision Range

work over rig / ship / others

Monitoring System, Heating System, Control

Cernavoda Nuclear Power Plant. Unit Rectivity

Responsible for installation and repair of electrical,

electronic and

pneumatic components on compressor units, generator

units, pump units, ignition systems and air fuel

systems.Install ration, calibrated and validated equipment,

troubleshoot problems, Provide preventative

maintenance and support Continuous Improvement

Projects. Major Areas of Responsibility include

power distribution, process controls and control systems,

motor control and related devices, lighting,

Associated instrument maintenance and proper

documentation. Apt work and high radioactive

environment.

Date (from – to) 1999-2000

Techint Cimimontubi-Milano,Italy;Bonny

Name of company

Island,Nigeria;N.L.N.G. Nigeria

Type of business or sector Refinery, Bonny Island, Nigeria

Occupation or position held Instrument Technician & Electrician Commissioning

Main activities and Electrical lighting, gas monitor sensors, and Instrument

responsibilities calibrations etc.

Electrical power installations

Maintenances of instruments as; transmitter, level switch,

Short description of

pressure switch, flow meter.

equipment on drilling or

Cable tracing and pipe cable protections, commissioning

work over rig / ship / others

instrumentations system and cable connections to the

junction box

Date (from – to) 2000-2002

Name of company Shipyard Agigea - Romania

Type of business or sector Upgrading Jack up drilling platform

Occupation or position held Rig Electrician and commissioning technician

Main activities and Daily check the AMOS computer program that reports

responsibilities each component functionality and maintenance; and spare

parts stocks;

Work Approval request in failure cases Planned /

unplanned by AMOS.

Maintenance and records of safety critical elements

Routine inspection and maintenance of electrical

equipment rig

Maintenance and repairs of dc / ac motors, AC

generators

Inspection and maintenance of on the rig's fire and gas

detectors surveillance unit (gas monitor system)

Inspection and maintenance of radio communication

emergence Including batteries

Maintenance of the electrical equipment in hazardous

area.

Proper handover DURING shift change.

Cranes repairs and maintenance.

Inspection and maintenance of equipment and

machinery emergence.

Repairs and maintenance of equipment fill up air

condition refrigerant

Repairs and maintenance of laundry and kitchen

machines

Maintenance and repairs of SCR unit; DC; AC modules

and others equipments in MCC engine room.

Keeping proper records for all activities on the rig,

Maintaining the inventory spare parts and consumable.

Worked in team for replacement of mud pump dc motors

and draw work dc motors, top drive recently generation,

gas monitor system, air compressors, water makers, SCR

Short description of

etc. DC motors GM, 800 kw x 600 volts, TD varco

equipment on drilling or

siemens with VFD water maker with osmoses, emergency

work over rig / ship / others

lighting,

and distribution panels, Ingersol Rand compressors.

Date (from – to) 2002-2007

PETROMAR – Offshore drilling and production

Name of company

Constanta, Romania

Type of business or sector `Drilling

Rig Electrician

Occupation or position held

Jack-up drilling rig, bleak sea.

Main activities and

Daily maintenance and routine inspection of electrical rig

responsibilities

equipment

Repair and maintenance of electric engine AC / DC

Repair and maintenance of generators AC / DC

Electric command equipment designed for jack-up drilling

rig, Ward-Leonard system.

Inspection and maintenance of the rig’s fire and gas

surveillance unit ( GAS MONITOR SYSTEM )

Inspection and maintenance of radio communication and

navigation equipment including radio and emergence

batteries

Maintenance and operation of the entire light for this rig.

Repair and maintenance of the electrical equipment in

hazardous areas.

Crane repair and maintenance

Maintenance and repair of Laundry and kitchen

machinery.

Maintenance of DC motors: the length brushes, bearings,

field excitation, alignment, bolts tightness.

Jack-up Independent Leg Cantilever

Electric Asynchrony motors AC / DC engines

Power generators AC

Electric command equipment designed for jack-up drilling

rig, Ward-Leonard power system.

Electric light system for rig.

Fire and gas surveillance unit (gas monitor system).

Radio, communication and navigation equipment,

including radio and emergency batteries

Ross Hill SCR controls corporation Bentec 1400 SCR

Drive System With Programmable Logic Control System.

SG & MD-Smart SWACO Mud totco watch system. Draw

works EU-1320 and EU-110 National WIRTH GH 2000

EG-2G-DC-LV. Brake Elmagco 7838 & 6032. (Baylor

BRAKE SYSTEM, BCS) Mud Pumps 12-P-160; 3 Wirth

Short description of TPK 2000 HP each (National). IDECO 1600 & 7500 psi

equipment on drilling or international WIRTH. (PLC Control). Varco TDS 11S 9S &

work over rig / ship / others 36 & 70 Series with Drive house (Siemens). Canrig Top

Drive Drilling System (1250 AC 681). With IDM. D399 &

D398 Rig Engine, Cat 3512, Cat 3512 B (PLC), as 3412,

3406,

3404 and Cummins Engine. GAI-TRONICS

CORPORATION Paging system. Also both type of DC

Traction Motors Series and Shunt type.

Date (from – to) 2007-2009

Name of company Nordjysk Ressource Denmark

Type of business or sector Naval electrical installations [SCANEL-Frederikshvan]

Electrician Techinician

Occupation or position

held

Main activities and Repairing and maintenance

responsibilities

Electrical measurements devices on engines, power

installations

Short description of

Connections in order and force after electrical panels and

equipment on drilling or

outline plans and reading schemes

work over rig / ship / others

-connection for electric motors

-measurements for cables and electric motors

Date (from – to) 2009- 2014

OIL SERVICES GROUP [ GSP] – Constanta, Romania

Name of company

Drilling

-Relocated on different country an jack up drilling

Type of business or sector platforms

Rig Electrician and Assistant Chief Electrician

Occupation or position

held

Daily presentation of technical reports as per the rig operations

Main activities and

in relation to the electrical installation and the electrical

responsibilities

equipments and safety/tool box meetings.

Direct and participate in all activities related to exploitation and

maintenance

Of power supplying.

Responsible for various duties including operational integrity,

maintenance (preventive maintenance), installation / removal of

electrical equipment, repair and documentation of the entire

offshore units electrical systems, and equipment to include all

refrigeration and air conditioning systems, all electrical power

generation sources, rectifiers and circuits, transformer, power

distribution equipment, electrical motors and controllers,

performing diagnostic tests and troubleshooting system faults

and failures, of all electrical equipment down to the component

level. Ensure that electrical power is supplied where and when

needed, that all electrical system are within safety and

regulatory body compliance standards all electrical equipment

remains operative throughout the operation.

NVO Technology

Top Drive VFD; TDS11A

Draw Work ADS-10D NOV Water Cooled Brakes & VFD with

AC Motors

Pipe Racking System (PRS-8i)

Drillers cabins with double cheir

Amphion MTC Draw Work

Mud Pumps with VFD AC motors

Master / Slave PROFIBUS & DRIVE CLIQ with Ethernet

Communication System

Drive Interface Soft Starter ES -Step 7

Short description of

equipment on drilling or CP5512-PC / MCIA Processor Communications by PROFIBUS

work over rig / ship / others

AC Generators, Leroy Somer LSA LS 52 2S55 (total 5) x 600V

AC, 1375 KVA, 1325, 60

SG & MD-Smart SWACO Mud totco watch system.

Mud Pumps 12-P-160; 3Wirth TPK 2000 HP each (National).

IDECO 1600 & 7500 psi international WIRTH. (PLC

Control).

D399 & D398 Rig Engine, Cat 3512, Cat 3512 B (PLC), as

3412, 3406,

Date (from – to) 02.2014 – 08.2014

Name of company NABORS DRILLING COMPANY

Type of business or sector Drilling onshore

Occupation or position

Chief Electrician

held

Arrange and conduct regular Health & Safety inspections

Main activities and

of electrical machinery and power management systems

and power management spaces.

Liaise with the Senior Mechanic with regard to

maintenance/repairs and planning ahead so as to avoid

the risk of daily through equipment breakdown. Used

preventive maintenance programmed in accordance with

company requirements and as directed. Ensure there is

always an adequate stock of electrical parts consumables

at all time to maintain a continuous operation Inspection,

responsibilities

maintenance and troubleshooting of emergence

equipment and machinery. Daily maintenance and routine

inspection of electrical rig equipment and record of safety

critical element Repair and maintenance generators dc:

collector, brushes, bearings, exciter, alignment, bolts

tightness, greasing and suspect noises Inspection and

maintenance of on the rigs fire and gas detectors.

Maintenance and operation of the entire light system for

this rig.

-Rig Mod. Canrig

-Top Drive Mod. TDS-8A VARCO SIMENS Variable

Frequency Motors AC vertical

-Mud Pump National Mod. 1700 triplet ;No 3 EL. Motors

DCx750kw

Short description of -draw work No.3 EL Motors DCx750kw

equipment on drilling or -Engine NO.4 Cat.3512

work over rig / ship / others -Generators KATO 2000kw 1200 RPM 600 Volts AC 60

Hz

-Electromagnetic break control system Mod 7838

BAYLOR

Date (from – to) 01.10.2014 - Present

Name of company KLAFF A/S – Mo I Rana, Norway

Type of business or sector Electrical installatioan

Occupation or position held Electrician Technician IT

Main activities and

Installation of cable television and Internet with fiber optic

responsibilities

pulling fiber optic cable

Short description of

equipment on drilling or

mounted path for fiber optics

work over rig / ship / others

mounted signal reception apparatus for television

and internet

mounted satellite antenna and did all the

installation

Date (from – to)

Name of company

Type of business or sector

Occupation or position held

Main activities and

responsibilities

Short description of

equipment on drilling or

work over rig / ship / others

EDUCATION AND TRAINING

1978-1983

Date (from – to)

COLLEGE TECHNICAL OF TRANSPORTATION, IASI, Romania

Name of organizations

Electrician Technician – Low and High Voltage

Type of educations or

training

1303

Certificate Number

August the 8th 1983

Validation of Certificate

2008

Date (from – to)

EUC NORD- Frederikshavn - Denmark

Name of organizations

Electrician Technical

Type of educations or

training

3467

Certificate Number

May the 20th, 2008

Validation of Certificate

2014

Date (from – to)

Port Health Authority- Constanta

Name of organizations

International certificate of vaccination or prophylaxis

Type of educations or

training

Certificate Number

May the 28,2014

Validation of Certificate

2013

Date (from – to)

CERONAV- Constanta, Romania

Name of organizations

Basic Safety Training and Seaman book

Type of educations or

training

00002166

Certificate Number

March the 29 th,2013

Validation of Certificate

2013

Date (from – to)

Pava Asociados S.A. de Ciudad del Carmen, Mexico

Name of organizations

Rig Pass and all courses for jack up

Type of educations or

training

R-935

Certificate Number

April the 15 th, 2013

Validation of Certificate

Date (from – to)

Name of organizations

Type of educations or

training

Certificate Number

Validation of Certificate

LANGUAGE SKILLS

MOTHER TONGUE Romanian

OTHER LANGUAGES English Italian French

Reading skills Medium Medium Medium

Writing skills Medium Medium Medium

Verbal skills Medium Medium Medium

Other technical skills

Welding, Electronics, & refrigeration.

Word, Excel, AMOS, NS5, Internet, Outlook

PC skills

SOCIAL SKILLS AND COMPETENCES

- Over 28 years experience in electrical field and very good working experience in drilling projects;

very good experience working in offshore electrical installations

- Good experience in working with all electrical equipment commonly used in the drilling rig

projects

- Reading and understanding electrical drawings

- Strong experience in maintenance and commissioning activities

- Overhead traveling bridges, gates cranes for electrical installations; Electrical static engines and

generators for marine platforms

ORGANIZATIONAL SKILLS AND COMPETENCES

A big ability in coordinating test & checks, pipes installation, lighting systems and electrical

connections works.

Good integrations in work groups, communication with work colleagues, a positive attitude

towards my work.

Contact this candidate