Kevin S Maloney Instrumentation & Controls (Technician) (Fitter) (Foreman)

Contact information

**** *. ********* ****** *********, Florida 32505 email:aco44w@r.postjobfree.com Home

850-***-**** Cell phone: 850-***-****

PROFESSIONAL BACKGROUND

Extensive Management skills: (Project manager), (Superintendent E&I), (General foreman,

E&I, Pipe) QA/QC, Quality Assurance/ Quality Control, Operations Inspector, Startup &

Commissioning

I Have 30 + Years’ Experience in Industrial Construction, Plant and Facilities

Maintenance for: Petroleum/ Chemical, Power Generation, Paper Industry,

and Offshore in the fields of:

Electrical and Instrumentation: Controls and Process systems Field Technician.

Piping & Mechanical: All Phases

CERTIFIED CRAFTS:

(#1) (ELECTRICAL &INSTRUMENTATION) - CONTROLS TECHNICIAN,

INSTRUMENT FITTER, GENERAL FOREMAN, FOREMAN, JOURNEYMAN.

(#2) (Licensed: MASTER PIPE FITTER & PLUMBER) – SUPERINTENDENT, GENERAL-

FOREMAN, FOREMAN, JOURNEYMAN.

(#3) (ELECTRICIAN) JOURNEYMAN

(#4) (REFRIGERATION, HVAC & HEATING TECHNICIAN

I also carry other certifications and continued educational training for Safety & Industrial

Trade’s. Some of which are listed below:

(#1).OSHA 10 card,

(#2).TWIC card

(#3).I can read and interpret any type of Drawings, ISO’s, P&ID’s, Location & Installation, Loop

sheets, Electrical Schematics& diagrams

(#4).Refrigerant Recovery & Transition Certification

(#5).Experienced with all types of Electrical & Controls Voltage, 3phase – 4,160, 2,400, 480, 277

VAC, Single Phase 120/240/ VAC, 4 - 20ma, and 0-10 VDC), Instrument Control Systems,

DCS, Switch Gears, Motor Control Centers, PLC’s, Variable Frequency Drives.

(#6).NCCER Certified in Instrumentation

(#7).I have a STATE MASTER Plumber/Pipe Fitter License #00664, Alabama

(#8).I have a Journeyman Natural Gas Technician/Installer License #00381, Alabama

(#9).Certified in HVAC/ Refrigeration Technician/Mechanic

(#10) Having Run My Own Mechanical Contracting Company, I am extremely aware of the

importance of Safety and Quality in Craftsmanship for the customer, as well as Profit margins

and Professionalism for the Company I work for.

(#11) I’m certified on Allen Bradley, Rockwell SLC500 and RSLogix500, and G.E.’s Intelligent

Platforms, PLC’s programming. Also Wonderware.

(#12) I’ m certified and trained in L/A/C/T Flow control’s for: FMC, Flowmaster, Rosemount,

Honeywell metering systems for the Petroleum Industry.

(#13) I’m Certified and Trained in Electrical Safety and Arc Flash Protection through Shermco

Industries.

PROFESSIONAL ACCOMPLISHMENTS

(#1).I have worked in the capacity of Senior Instrument & Controls Technician,

Instrumentation General Foreman/ Foreman and Journeyman Instrument Fitter

(#2) .I have a great deal of Construction knowledge to offer any employer. Of course I can Read

and Interpret and Follow all types of drawings, ISO’s, P&ID’s, Location, Installation Details,

Manufacturer Specifications, Index’s, Electrical Diagrams, Schematics, and I also pay close

attention to the Scope of work as laid out for each project. And remain within that scope without

deviating from what is required, unless I am authorized to do so. I research and plan my work

carefully according to schedule, or as directed.

(#3).I can fabricate and install any type of Electrical Conduit, Cable Tray, E&I junction boxes

and Panels, Process & Control Piping, and Tubing, whether it needs to be bent, welded, or

threaded. This includes any tray, supports, instrument mounting stands, or structural steel. This

also includes Hydraulic and Pneumatic tubing and pipe.

(#4).I am an Instrument Technician; I have worked many Projects Calibrating, Function Testing,

Loop Checking, Troubleshooting, and Startup & Commissioning. I stay current on the latest

trends in Instrumentation & Process Controls, including Variable Frequency Controls. I am very

Knowledgeable about Programmable Logic Controls & DCS systems Any type of

instrumentation, 24v, 120v, 240v, (4-20ma), even 0-10VDC.

(#5).(General Foreman): (BE&K) I was responsible for 4-Foreman, and 4- 8 man crews, 36 total.

On a new recycle Pulp Mill as well as a major shutdown on the paper machine at the same plant.

The project came in on time and under budget.

(#6).I worked offshore for J Ray McDermott Inc. Hooking up Metering Stations on Offshore

Platforms, Laying Pipe Lines on Lay Barge #29, & #23, and Derrick Barge #21, and setting

equipment on Oil & Gas Rigs. I was with them for 3 years, and worked on several major

operations for Shell, Amoco, Cognac, Exxon, & BP Oil.

(#7).(Foreman): I ran the Instrumentation Testing Department on a job in Covington Va. For

(BE&K.) Where I was responsible for giving both, written, and hands on Instrument Fitter Tests

as a pre-employment requirement. I was Field Engineer on same project when I was not

Proctoring Tests.

(#8). (General Foreman): E&I, Instrument Technician, at Courtaulds Fiber, in Mobile, Alabama.

For Davis International Inc. I was responsible for: Bench Calibration, Field Installation,

PCL/DCS Loop Check, and Start up & Commissioning, at the new Tensile Fiber Project.

(#9).(General Foreman Instrumentation) for Davis International. Project was an Accidental

Explosion Rebuild at (SHELL NORCO REFINARY). After an accidental explosion, the refinery

operations needed the Damaged Furnace’s and L.P. Skid back in operation as quickly as possible.

I designed a, Very Large Bulkhead Panel capable of containing 72 pneumatic terminations. We

ordered Bundled Dacron with 17 multiple tubes. We then pulled 3200 ft. From control room to

Field panel and replaced 55 Thousand feet of pneumatic control tubing, (That’s 11 miles in six

weeks)! The Furnace and Plant was back in operation 4 weeks ahead of the anticipated schedule.

CAREER EXPERIENCE

***Some of the Industrial Companies I have been employed with

over my career***

Most Recent – Plains All American Pipeline Inc., Professional Energy Crafts, T.I.C, Northern

Electric, in the North Dakota Oil Fields, Other companies include- BE&K, Davis International,

Davis Electrical, Harbert Yeargen, Flour Daniels, Brown & Root, J Ray McDermott Inc.,

Harmony Construction, Industrial Services Inc., Air Design Inc., Kamtech, Triad Electric &

Controls, D Z Atlantic, Zachry, Robins & Morton, Dynamic Mechanical & Industrial Services,

Russ Contractors, The Industrial Company of Wyoming, Pro Energy Crafts.

Personal Qualities

I always put SAFETY ahead of everything else. I carefully consider what effect my actions and

work may have on the people I am working with and the environment.

I will always work hard to make sure that all my work is done timely and professionally.

I have great Comprehensive skills and I always want to gain more knowledge in every aspect of

my job performance, especially staying current on new proven trends of the trades.

In my planning I practice “Open Communication and Encourage Dialogue,” with the other Crafts

and Trades on the Project to ensure Safety, and in effect, I have learned this expedites efficiency

and a high degree of quality throughout the construction process to Project Completion

Most recent Employment:

Plains All American Pipeline

( #1)

Electrical & Instrumentation Technician

Main office in N.D., Belfield: 701-***-****, I was responsible for operations at

Stanley, N.D., Manitou Station, Vanhook Station, and Whiting Station

Responsibilities: Installing and Maintaining all Electrical and Instrumentation at these 4

facilities, Variable frequency drives, Motor control centers, Multistage Pumps, any and all in

line devices which had to do with operations. Communications, Troubleshooting, Maintained

2 Gas flaring stations, as well as 100’s of miles of pipelines, Metering stations, Control valves.

Familiar with all Electrical voltage’s, 4,160 -2,400 VAC, 480 VAC equipment, 4-20 ma, 48, 24

VDC, 0-10 VDC.

I was also responsible for calibrating and maintaining all instrumentation including critical

L.A C.T. metering devices.

Certified in programming and maintaining PLC’s (G.E.’s Intelligent Platforms).

(Allen Bradley’s Fieldview). (Rockwell’s SLC-500 and RSLogix).(Wonderware).

I had to quit my position on 07/28/2013

Reason for leaving: My wife developed stage 4 cancer and became critically ill! She went into

a coma and I was not able to take care of her and continue to be an effective employee for

Plains. I was forced to quit and take her home to Pensacola, Florida. She has since fully

recovered and is cancer free. She is a 100% Disabled Veteran and will remain home with

family from now on and I am fully able to return to work without any future worries of Her

welfare.

(#2).Employed as Senior Instrument Technician

Professional Energy Services

Wheelock Gas Compressor Station

660-***-**** Ray, North Dakota

E&I, Startup & Commissioning at new Gas Compressor Station

(#3) Senior Electrical & Instrumentation Controls Technician

Northern Electric Inc. Petroleum division, North Dakota

Parshall, North Dakota

Main Office: 1275 W. 124th avenue (Phone: 877-***-****

Westminster, Colorado 80234

(#4) Instrument Technician/Fitter

(Zachry Construction) at New Biomass Power Generation Facility

Barnesville, Georgia

Main Office: 527 Longwood Dr. San Antonio, TX. 800-***-****

Read & interpret drawings, P&ID’s, ISO’s, Location, Installation details, Calibration specs,

Electrical diagrams. Fabricate and install instruments, process &control, tubing, tray, and piping.

Calibrate Instruments per specifications; field test and trouble shoot any problematic instrument

control loops.

05/11/12-Thru-07/26/12 (ROF)

(#5) Instrument Technician/Fitter (“Job duties, same as above”)

[Triad Electrical & Controls]

Baton Rouge, La. 2288 Airway Dr.]/ Ph. 225-***-****

03/13/12 -Thru -05/10-12 Job completion (ROF)

(#6) Instrument Technician/Fitter

[Day & Zimmer, D.Z. Atlantic]

Robin Hood rd. Virginia Beach, Va.

215-***-****

12/11/11 – thru – 03/13/12 (ROF) Job Completions

(#7) Dynamic Mechanical Systems Services

(Owner of Company) Senior Instrument Technician, Project Manager, Licensed Natural Gas

Technician, Senior HVAC Technician, Project Superintendent, Project Estimator.

(DYNAMIC MECHANICAL SYSTEMS SERVICES)

3009 W. Cervantes street Pensacola, Fl. 32505

(10/01/2001 – thru – 10/13/2008) Sold business

EDUCATION

Pensacola Adult High School: High School diploma 3.9 GPA 1978

Pensacola Junior College, George Stone Vocational/Technical School

I attended and completed several Trade schools (above) 1981 – 1984

Major Appliance Repair, Mechanical Piping & Engineering

Pensacola State College 2006 - 2008

I returned to College in 2006 thru 2008 seeking a diploma in Environmental Sciences.

After 3 semesters an auto accident forced me to postpone my studies.

Averaged a 3.8 G.P.A.

I have also continued with my education by taking in depth classes and certifications which are

necessary to remain proficient with new systems and processes required in our ever changing

industry.

References are available upon request.

Contact this candidate