Oleg Muhamedov

**** * ***** *******, ******, AZ *5741,

Cell:520-***-****

e-mail: acgzkr@r.postjobfree.com

SKILLS AND ABILITIES

Extensive experience in Electrical/Electronics Engineering. Good working knowledge of Altium, P-CAD, PROTEL for designing PCB. Experience working with AutoCAD, Proteus, SolidWorks Electrical.

Experience in UART, RS485, USB, CAN, Ethernet, PCI, ZigBee, Bluetooth, TCPIP etc. protocols.

Experience with hardware devices (design analog and digital devices).

Lab characterization and debug skills.

Experience in component engineering.

Proficiency in reading and interpreting electrical schematics, drawings, specifications, and manuals.

Design for manufacturability experience.

Experience in innovating electrical engineering solutions to new product at both the development and product manufacturing phase.

Strong troubleshooting and root cause analysis skills.

Excellent analytical and problem-solving abilities.

Developing test solutions for electronic products. Experience with LabVIEW, LTSPICE, Proteus.

Experience in creating technical documentation and update existing procedures when necessary using MS Office and MS Visio.

Experience in maintaining, revising, updating and document existing configurations, including troubleshooting, repair and improving of system functionality.

Project management experience.

Proficiency in Math analysis tools.

Experience in compiling engineering reports and documentation.

Experience in writing test plans, including the development of test procedures to verify designs.

Prioritizing and multitasking skills.

Strong decision-making skills.

EDICATION

Master of Science in Electronic/Multi-channel Communication, Electro-Technical University of Communication, 09/1986 – 06/1993, Tashkent, USSR

EXPERIENCE

Senior Electrical Engineer, Ridgetop Group Inc., 1/2016 Tucson, AZ

Design electronic and electrical circuit, develop analog/digital hardware, prepare schematics and analog/HS digital PCB layouts (Altium16, NI Circuit Design, Active-HDL, LTspice, 16-bit, 32-bit controllers). Electromagnetic interference testing and problem solving.

Create technical documentation and update existing procedures when necessary using MS Office and MS Visio. Compile engineering reports and documentation.

Senior Advanced Manufacturing Engineer, Honeywell Aerospace, 06/20150 -12/2015 Tucson, AZ

Develop and distribute manufacturing documentation in support of product design, configuration and build requirements. Documentation to include such items as Bill of Materials (BOM), Wiring Diagrams, Cable Harnesses, Assembly Drawings, Manufacturing Work Instructions, Test Plans, etc.

Provide support to design, manufacturing and commodity teams in selection, qualification and application of components and suppliers used in Aircraft's products.

Senior Electrical Engineer, Competitive Engineering Inc., 1/2014-06/2015 Tucson, AZ

Design CNC with PLC and Industrial Computer: PCB level design (sensors, I/O systems), system level design (Altium14, SolidWorks Electrical, DDR Motors, The stepper motors, DC Motors with encoder, AVR Atmel MC, switch mode power supply’s, Electronic Valve control …). PCB testing, Electromagnetic interference testing and problem solving. Owner,OlM Technology, 11/2012 – 1/2014 Tucson, AZ

Contracts for design, configuration, and maintenance different electronic equipment’s (PCB design - Altium10).

Network installation, configuration and technical support of complete network environment on MSWindows Server platform (f.e. Cisco and HP switches/routers, Wi-Fi.) Test Engineer/Component Engineer, Meggitt, 11/2011 –09/2012 Tucson, AZ

Determine the procedures done in BOM scrubbing. Analyze and assess existing electronic component.

Create new part numbers, customize drawings, select second source replacement parts for a leading supplier of avionics products for business, commercial and military aircraft.

Review all new component requests and collaborate with design engineers to select second source replacement parts.

Maintain the Approved Parts List (APL) or Approved Vendors List (AVL).

Create new part numbers and manage component failure analysis for issues affecting high DOA rates. Comprehensive background includes board design and test in a fast-paced manufacturing environment.

Collected the supplier’s parametric data for comparison purposes. Drawing up reporting documentation.

Test experimental samples, analog and digital circuits. Modify, troubleshoot and debug circuits (Switched Power supplies for lithium batteries, Electromagnetic interference testing, Certification prep for Electromagnetic compatibility).

Set up test plan. Write engineering reports and documentation. Principal Engineer, TLBS Nye Markeder ApS, 10/2010 – 05/2011 Tucson, AZ

Design electronic and electrical circuit, develop analog/digital hardware, prepare schematics and analog/HS digital PCB layouts (Altium10, Active-HDL, LTspice, Proteus).

Create technical documentation and update existing procedures when necessary using MS Office and MS Visio. Compile engineering reports and documentation.

Electromagnetic interference testing and problem solving. Research Hardware Engineer, Current Energy, 05/2007 – 05/2010 Tucson, AZ

Design specialized microprocessor controllers (electronic and electrical circuit engineering). Develop the next version of the universal controller using Altium10 (P-CAD, LTspice, Kongraf) software. Prepare schematics and analog, digital, RF PCB layouts. Experiment with LabVIEW, Active-HDL, Proteus (EMS Motors).

Design for Manufacturing, Design for Test, Reliability analysis.

Set up test plan. Explore the possibility application of complex LabView to calibrate the controllers.

Correct ZIGBEE transmitter firmware. Adjust ZIGBEE transmitter’s (RF) base analog firmware customized for specific applications. Debug data exchange between ZIGBEE coordinator and sensor (EMC, InSight Desktop (Ember)).

Experimentation with different protocols: UART, RS232/485, USB, CAN, Serializer/Deserializer, MODBUS, Ethernet, PCI, PCI-E, TCPIP, Bluetooth, etc.

Test experimental samples, troubleshoot and debug analog and digital circuits using specific applications and C++;

Develop system verification and validation test requirements. Create technical documentation and update existing procedures when necessary using MS Office and MS Visio. Set up test plans. Compile engineering reports and documentation.

Computer Service Engineer, Arizona on eBay Auctioneers, 10/2006–05/2007 Tucson, AZ

Computer repairs and maintenance.

Software technical support and troubleshooting.

Network installation, configuration and technical support of complete network environment on MSWindows Server platform (LANState, Wireshark).

Principal Engineer, TELEBEST LLC, 02/2002 – 06/2006 Uzbekistan (Former USSR)

Design, installation, configuration and technical support of the corporate satellite IP telecommunication product for the Navoi Mountain Metallurgical Industrial Plant.

Network installation, support and configuration on MSWindows Server and MSWindows workstation. Principal Engineer, NIHOL, 03/1999 – 02/2002 Uzbekistan (Former USSR)

Provide warranty support for IBM RS/6000 and IBM РС servers.

Provide warranty support for AIX and Windows NT operating systems.

Network installation, configuration, troubleshooting and technical support of complete network environment on MSWindows Server platform.

Principal Engineer, State Scientific Research Institute of Microelectronics, 1994–1999 USSR

Design and debug specialized microprocessor complex for the Department of National Safety & State Commission

(electronic and electrical circuit engineering, analog/digital hardware development (PLC, FPGA), analog/digital/RF PCB designed, analog and switch mode power supply’s designed, the metrology, set up test plans, test case and test results documentation, compile engineering reports). Develop system verification and validation test requirements.

Design for Manufacturing, Design for Test, Reliability analysis.

Participate in design, manufacturing of the integrated software (VHDL, C++) and delivery of two specialized microprocessor complexes for the Air Forces (EMC). CNC Machines Service Engineer,

Scientifically Production Association "Photon" (IC manufacturer), 1989 –1994 USSR

Support, configuration and upgrade hi-precision machines for IC manufacturing (Analog JTAG technologies). Microprocessor-Based Devices Design Engineer.

Scientifically - Production Association "SIGNAL", 1987 – 1989 USSR

Design (electronic and electrical circuit engineering, analog/digital hardware development (PLC’s), analog/RF/digital PCB designed, analog and switch mode power supply’s designed, drawing up of the program of carrying out of tests), manufacture, and debug the integrated software to the USSR Military (Metrological mobile station of for verification airport equipment. Metrological mobile station of for verification for verification of aircraft equipment.). Write engineering reports and documentations. Develop system verification and validation test requirements. Certifications

Auxilium, Inc. 2015 Leadership for Engineers

SolidWorks 2014 Electrical

ReliaSoft 2011: Reliability @ Life DataAnalysis (Weibull++ 7) NTlect 2005: Programming Language C++

IBM RS/6000 Technical Service ECM-03069/97

IBM Server/Windows NT Server ECM-00359/98

Bilingual: Russian and English.

References: Provided upon request.

Contact this candidate