JOSEPH ADIYAMAN.T

E-Mail: acgzfb@r.postjobfree.com Mobile:

+966*********,+966*********,+918*********

Seeking middle level assignments in:

Quality Assurance / Control with an organization of repute preferably in

Piping, Welding in

Oil, Gas and Power

Career Contour

COMPANY: SAMSUNG ENGINEERING SAUDI ARABIA (SAUDI ARABIA)

DURATION: 16- May- 2014 to Till Now

DESIGNATION: PIPING INSPECTOR

PROJECT: SHAYBAH # 1 INLET & GAS TREATMENT (SAUDI ARAMCO)

SAUDI ARAMCO APPROVAL NUMBER (SAP): 70018667

Accountabilities

1. Verification of isometric dawning with respect to P&ID. .

2. Prepare hydro test packages, line check and punch listing.

3. Control of non conformities issuance of punch list.

4. Coordinating with client/consultants while the inspection is being

carried out and offer any clarification is required.

5. Preparing and maintaining various QA/QC documents and final test

packages.

COMPANY: SAMSUNG ENGINEERING INDIA (Dahej-Gujarat)

DURATION: 01- Sep- 2012 to 30-Sep-2013

DESIGNATION: PIPING INSPECTOR

PROJECT: HDPE (HIGH DENSITY POLYETHYLENE) ONGC PETRO ADDITIONS LTD

Accountabilities

1. Verification of isometric dawning with respect to P&ID.

2. Reviewing the approved quality plans, manuals and scope of work to

perform the required inspection.

3. Witnessing the Hydro testing.

4. Prepare hydro test packages, line check and punch listing.

5. Control of non conformities issuance of punch list.

6. Coordinating with client/consultants while the inspection is being

carried out and offer any clarification is required.

7. Witnessing of pneumatic test, hydro-test, and flushing; system lay-up

both in and in erection field.

8. Preparing and maintaining various QA/QC documents and final test

packages.

9. Witness of alignment, orientation and dimensions of installed piping.

10. Assures that all joints are exposed for examination during pressure

test.

11. Ensuring vents are open when filling and draining lines.

12. Conform repairs, re-testing and re-inspection in accordance with

specifications.

13. Making a re-instatement punch list and clearing the items.

14. Witnessing of Flange joint assembly and bolt torque.

15. Ensure the blinds are removed and correct rating gaskets are

installed.

16. Inspection of gaskets, supports, valves prior to line reinstatement

acceptance as per the latest drawing for construction, codes and

specification standards.

17. Prepared documents, procedures for inspection method,inspection and

testing plan in

Computerized environment.

18. Clearing of MCC (Mechanical completion certificate) items.

COMPANY: SAMSUNG ENGINEERING INDIA (Dahej-Gujarat)

DURATION: 15- Jan- 2011 to 30- Aug- 2012

DESIGNATION: PIPING INSPECTOR

PROJECT: DFCU & AU (DUAL FEED CRACKING UNIT & ASSOSIATED UNIT),

ONGC PETRO ADDITIONS LTD

Accountabilities

1. Verification of isometric dawning with respect to P&ID.

2. Reviewing the approved quality plans, manuals and scope of work to

perform the required inspection.

3. Witnessing the Hydro testing.

4. Prepare hydro test packages, line check and punch listing.

5. Control of non conformities issuance of punch list.

6. Coordinating with client/consultants while the inspection is being

carried out and offer any clarification is required.

7. Witnessing of pneumatic test, hydro-test, and flushing; system lay-up

both in and in erection field.

8. Preparing and maintaining various QA/QC documents and final test

packages.

9. Witness of alignment, orientation and dimensions of installed piping.

10. Assures that all joints are exposed for examination during pressure

test.

11. Ensuring vents are open when filling and draining lines.

12. Conform repairs, re-testing and re-inspection in accordance with

specifications.

13. Making a re-instatement punch list and clearing the items.

14. Witnessing of Flange joint assembly and bolt torque.

15. Ensure the blinds are removed and correct rating gaskets are

installed.

16. Inspection of gaskets, supports, valves prior to line reinstatement

acceptance as per the latest drawing for construction, codes and

specification standards.

17. Prepared documents, procedures for inspection method,inspection and

testing plan in

Computerized environment.

18. Clearing of MCC (Mechanical completion certificate) items.

COMPANY: K4 ELECTRO MECHANIC W.L.L (Qatar)

CONTRACTOR: PUNJLLOYD

DURATION: 1-August-2009 to 22-September-2010

DESIGNATION: QA/QC ENGINEER (Piping / Welding/NDT)

PROJECT: STRATEGIC GAS TRANSMISSION PROJECT (STATION PIPING), QATAR

PETROLEUM

Accountabilities

1. Day to day monitoring & inspection of fabrication & erection activity

of Piping.

2. Performing all QC inspection activities in accordance with the project

Quality plan, ITP, procedures, applicable codes, standards and

specifications

3. Reviewing incoming material with Mill test certificates, Dimensional

check and physical condition check.

4. To ensure the Calibrated Equipment & Instrument and maintained the

documents

5. Preparation of WPS, PQR and conducting WQT as per applicable codes,

standards and specifications

6. Monitoring welder performance

7. Monitoring of PWHT, Hardness and PMI etc.

8. Preparation of Test package prior to the Hydro testing

9. Witnessing of Hydro test, Pneumatic test and NDT etc

10. Responsible for collating and monitoring quality records, recording

and reporting quality activities including liaison with PMC & CLIENT

in quality matters

11. Final document submission of related QC documents to the client

COMPANY: NASSER S.AL-HAJRI CORPORATION

CONTRACTOR: SAMSUNG ENGINEERING SAUDI ARABIA

DURATION: 15-Sep-2006 to 15- Sep-2008

DESIGNATION: QA/QC ENGINEER (Piping / Welding/NDT)

PROJECT: TASNEE ETHYLENE CRACKER PROJECT (SAUDI ARABIA)

Accountabilities

1. Monitoring Welding activities as per WPS

2. Material verification( Clearances of IMIR)

3. Inspection of various stages with consultants & preparation of

reports.

4. Inspection at various stages of welding [i.e. before, during and

after].

5. Co-ordination of NDT activities

6. Arrange client &Third party inspection as per RIW [Request for

Inspection Work].

7. Conducting Welding Procedure Qualification Tests & Welder

Qualification test

8. Preparation of welders' qualification test certificate & ID-card.

9. Preparation of final quality control records for submission and

approval of client

COMPANY: PONDY DIE CASTING PVT LTD. (PRESSURE DIE CASTING)

DURATION: July 2005 to Sep 2006

DESIGNATION: Production Shift Engineer & Assistant Maintenance Engineer

COMPANY: SARGAM METALS PVT LTD. (PRESSURE DIE CASTING)

DURATION: June 2004 to June 2005

DESIGNATION: Production Shift Engineer

Accountabilities

1. Preparation of production schedule.

2. Monitoring production schedules.

3. Minimizes the ideal hours & rejection %.

4. Duties involved handling the manpower.

5. Production quality Standards checking.

6. Preparing preventive maintenance.

7. Weekly maintenance schedule preparation.

8. Minimizes the brake down hours.

9. Trouble shooting of the machine Problem.

10. Spares parts maintained

COMPANY: SRI HARI ENGINEERING SERVICES

DURATION: May 2003 to May 2004

DESIGNATION:Fabrication Engineer

Accountabilities

1. Preparation of Various Quality control procedures.

2. Inspection of raw materials brought out items.

3. Inspection of final products and preparation of inspection reports.

4. Duties involved handling the manpower and coordinating with the

packing section.

Technical Qualification

Bachelor of Mechanical Engineering. May 2003.

I.F.E.T College of Engineering at Villupuram. India

(University of Madras)

Marks obtained: 59 %

Diploma in Mechanical Engineering. April 2000.

Krishnasamy Memorial Polytechnic at Cuddalore. India

Dept of TamilnaduTechnical Education Board

Marks obtained: 73.5%

Short Time Courses

ASNT level II. (PT, MT, UT&RT) (Oct

2008)

Q&Q inspection and technical consultancy services pvt Ltd.

S-1, 2nd floor, P.S Paradise,

73/34. 7th avenue,

Ashok nagar,

Chennai-600083.India.

QMS AUDITOR(ISO 9001:2000)

IRCA course number A17120

Certificate no:LAC/10058

DOHA,QATAR.

Personal Details

Father Name : D.THARCIUS

Date of Birth : 12.10.1981

Nationality : India

Native Address : 38A/5 Judge Bungalow Road,

Cuddalore-607 001,

Tamil Nadu,

India.

Phone no : 0091-4142-286363(India)

India driving Licence : TN31 200********

Passport Details

Passport no (New) : Z2717009

Place of Issue : Chennai, India.

Date of Issue : 14/10/2013

Date of Expiry : 13/10/2023

Passport no (Old) : E8886478

Contact this candidate