WILFREDO A. BERNAL

* ** **-****** ******, Cristina Homes, Sambat

San Pascual, Batangas, Philippines

Mobile Nos: +639*********

+639*********

Position applied for: Welding Foreman

Applicant's Profile:

Birth date: February 7, 1971

Birthplace: Santo Nino Faire, Cagayan Valley

Civil status: Single

Citizenship: Filipino

Height: 5'4"

Weight: 130 lbs.

Educational Background:

Inclusive dates: Schools / Universities

1988-1990 Adamson University

B.S. Mechanical Engineering

(Under graduate)

1984-1988 Roosevelt Memorial High School

Quezon City, Philippines

1978-1984 Damayan Elementary School

Quezon City, Philippines

Work Experience:

Position: Welder SMAW/FCAW (6G - 6GR - and FCAW)

Employer: CLOUGH AMEC

Address: CLOUGH AMEC Australia

Duration Covered: October 31, 2013 to November 18, 2013

December 28, 2013 to January 25,

2014

April 14, 2014 to May 05, 2014

Work Destination: Conoco Phillips Bayu Undan Project Offshore -

Timor Sea

Job Description: The project was part of upgrading system of

the helideck

of each facilities such as Floating Storage

Offloading (FSO)

and compression, Utilities and Quarters (CUQ). This

upgrading project of helideck needs an additional

support

from bottom up to the top of helideck. The materials

that we

welded and installed are pipe and reinforcement

plate of the

underneath of the helideck. All

welding are subjected to

visual and MPI inspection.

Position: Welding Foreman

Employer: ABJ Engineering and Contracting Company

Address: ABJ - State of Kuwait

Duration Covered: May 1, 2012 to September 3, 2013 (Project

Completed)

Work Destination: Total Laggan - Tormore - UK London Shetland Gas

Plant

Project

Job Description: This project was a classified gas plant

project and my job

is to supervise the welding works and welding

repair of

any pipe. This project was a module installation

that will

be used in processing of gas in UK. My

responsibility is

to supervise the welding of different types and sizes

of

pipes such as stainless pipe ranging from 2", 4", 6", 12"

up to 46" - including Carbon and Alloy steel ranging

from

2", 6", 8", 12", 18", 24", and 42" with different

thickness.

All welding works should pass the visual-U-T test

and and X-ray test. Welding procedure and

specifications

should be followed which are strictly prepared by

the client.

Position: Welding Foreman

Employer: ABJ Engineering and Contracting Company

Address: ABJ - Abu Dhabi Branch Fabrication

Duration Covered: September 1, 2011 to April 30, 2012 (Project

Completed)

Work Destination: Habshan 5 Expansion Project Abu Dhabi

Job Description: On this project I was assigned to supervise

the structural

pipe support that will be used in that project. The

process

that we used in welding is FCAW and SMAW. My closed

supervision is very needed to teach the welders

where

they are going to start to avoid distortion of

materials.

Pre-heating is also needed. All welding should pass

the visual and U-T Test.

Position: Coded Welder (6G and 6GR SMAW)

Employer: AMEC Services Ltd.

Address: AMEC Philippines Branch Office

Duration Covered: December 2, 2010 to December 20, 2010

Work Destination: East Timor - Bayu Udan Project (FSO Vessel)

OFFSHORE

Job Description: This project was just only a repair of star

board side of

FAIRLEAD winch in FSO vessel. We replaced some

stiffinneers which is already thin and installed a new

and additional of reinforcement stiffineers. And

including the repair and reweld of crack at the bottom

shell of ballast tank. All welding should pass in U-T

and MPI testing.

Position: Coded Welder (6G and 6GR SMAW)

Employer: AMEC Services Ltd.

Address: AMEC Philippines Branch Office

Duration Covered: April 15, 2010 to May 25, 2010

Work Destination: East Timor - Bayu Udan Shutdown Project

(OFFSHORE)

Job Description: This project was a shutdown project of a gas

platform that

needs repair and rehabilitation of

piping and support of the

platform. It needs to replace all

the defective pipelines and

all welding process should be

followed properly which was

prepared by the Australian welding

inspectors. All welding

should pass the X-ray and U-T

testing.

Position: 6G Welder

Employer: Kenana Sugar Company Limited

Address: Kenana Republic of Sudan

Duration Covered: July 15, 2009 to January 13, 2010

Work Destination: Boiler Division

Job Description: This project was a shutdown project of boiler

and I was

assigned to weld all the joints of

pipe from sizes 2", 6", 10"

and 24" by the use of Tig. All of

welding process should

pass in x-ray and U-T testing. All

welding process should be

be followed strictly which was

prepared by the proponents.

Position: Welding Foreman

Employer: Atlantic Gulf & Pacific Company (AG&P)

Address: Manila, Philippines

Duration Covered: March 28, 2007 to June 30, 2007

Work Destination: Keppel Project (lower column)

Job Description: The nature of project is a lower column

project that will be

used in offshore drilling project.

We used the FCAW welding

for full welding. Add all welds

should pass then X-Ray and

U.T Testing and should be passed in

100% x-ray and U.T

Test.

Position: Welding Foreman/FCAW WELDER

Employer: Atlantic Gulf & Pacific Company (AG&P)

Address: Manila, Philippines

Duration Covered: November 20, 2006 to February 15, 2007

Work destination: Goro Copper Nickel Project

Job description: Welding of carbon steel pipes and I-beams for

Modules. All

welding should be passed in X-Ray and U-T.Testing.

Position: Welding Foreman/FCAW WELDER

Employer: Atlantic Gulf & Pacific Company (AG&P)

Address: Manila, Philippines

Duration Covered: July 18, 2006 to November 17, 2006

Work Destination: Keppel Project (Pontoon and Column Project)

Job Description: Welding of carbon steel pipes and I-beams for

Modules. All

welding should pass in X-ray and

U.T testing.

Position: Tig and Arc Welder

Employer: Zamil Hook Up / Aramco Offshore Project

Address Saudi Arabia

Duration Covered: June 2005 to April 30, 2006

Work Destination Offshore Project

Job Description This project is an offshore project for the

Aramco Oil

Platform. It's a full installation of platform and

Modification of a platform. All

welding will be

subjected into X-Ray and U.T

Testing. All welding

should pass in 100% visual and X-

ray.

Position: Welding Foreman/FCAW WELDER

Employer: Kenana Sugar Company Ltd.

Address: Sudan

Duration Covered: May 2002 to November 2004

Work Destination: Boiler Project

Job Description Welding and repair of pipes and casing of the

boiler.

We weld and replace those old pipes

by the use

of gas welding, and stick rod.

Proper procedures were

followed prepared by the American

Welding Inspector.

FCAW process for the body casing of

the boiler.

Position: Pipe Welder, Structural Welder and Fabricator

Employer: All Seas Engineering

Address: Rotterdam, Netherlands

Date Duration: April 5, 2000 to January 31, 2001

Work Destination: Malampaya Natural Gas Pipeline Project,

Philippines

Job Description: This is a pipeline project and we are on board

on a

Pipeliner Barge. This kind of a job needs a high

ability of

welding because all the materials are permanent

materials.

We used 2 kinds of materials, one is carbon steel

pipes and

the other one is inconnell.We used a highly

sophisticated

welding machine in the "Fire Line"

and we've been trained

how to used it. And there are two types of gas that we used

in welding one is Argon and the percentage is 30%.The

procedures must be followed accordingly;

otherwise, the

job be messed up. Aside from welding pipe, they

assigned me to repair the craft out all the

rusty and

defective Plate shells all over the barge. All

welding are

subjected to X-ray testing U.T.testing and magnetic

testing.

Position: Pipe welder/Gas Welder and Fabricator

Employer: ABV Rock group K.B

Address Riyadh,Saudi Arabia

Duration Covered: March 7, 1994 to January 1, 1998

Work Destination; Underground Full Military Banker and Oil-Gas

Storage

Job Description: This project if tunneling or underground oil

and gas

Storage. And I worked here as an underground welder for

Four(4) years. It is a big project because in one site of

A project they dug up a 21 caverns. And the measurement

of each cavern were length 500meters;width-135meters;

Height-236meters.All of these caverns should be shielded

by plate a special plate of "hardox plate" that we called.

We used different procedures of welding. Sometimes we

Used MIG welding or Manganese Inert Gas Welding,

Automatic orbital welding machine, and FCAW welding and

Manual stick welding and of course we have to follow the

amperage welding system that is prepared by the American

and Swedish welding specialist. All welding should pass

in X-ray,U.T. testing, Magnetic test and leak testing.

Duties and responsibilities:

. In charge for all welding works.

. Ensure that all related performance of welding activities are properly

disseminated and clearly understood by qualified welders.

. Make sure that all plans are properly executed and all tasks are

completed with in the required time table given.

. Check and verify welder performance for maintaining of each

qualification/specification and requirements.

. Follow HSE policy, rules and regulations also the Company Rules and

Regulations.

. In addition of my duties and responsibilities as a Welding Foreman, I

act as a QA-QC or WELDING INSPECTOR. For the 15 years of my welding

profession, I've been scalate of my profession from Welder to Welding

Foreman. And being a FOREMAN, I've learned a lot of difficulties and

defects as well as the proper procedure of welding. To maintain the

good production of welding, I need to inspect all the welding works

before and after of welding works. Because I need to maintain the

closed supervision of welding to avoid the defects of welding. And due

to this, I can admit to myself even if I don't have the papers of

being a QA-QC or WELDING INSPECTOR, I could able to execute the proper

procedures of welding especially to exotic materials. And I'd been a

WELDING QUALIFIER of the AG&P Company because of my knowledge in the

proper procedures of welding. It's an advantage for me to be WELDING

QUALIFIER because I really came and experienced the procedure of

welding before I got into this position.

Contact this candidate