Stephen M brown

419-***-**** **** Washburn Berkey OH 43504

Experienced Skilled Trades Professional as Boilermaker Iron Ship Builders Apprenticeship &

American Line Builders Joint Apprenticeship

What’s Boilermaker- Boilermakers are employed in repairing, repiping, and re-tubing commercial

steam and hot water boilers used for heating and domestic hot water in commercial buildings and

multi-family dwellings. Sometimes these boilers are referred to as pressure vessels. Generally, a

pressure vessel is a storage tank or vessel that has been designed to operate at pressures above 15

p.s.i.g. The two main tasks of boilermakers involve using oxy-acetylene gas torch sets to cut or

gouge steel plate and tubes, followed by gas tungsten arc welding (GTAW), shielded metal arc

welding(SMAW), or gas metal arc welding (GMAW) to attach and mend the cut sections of tubes and

steel plates.[2]

Background

Summary

I'm a passionate 30 year old male with many years of on the job experience in the skilled trades. A long with many

other aspect of construction like transportation, production, safety and productivity. Was in the Linemen Substation

Apprenticeship for a few years before I resigned to get into the Boilermakers, Iron Shipbuilder Apprenticeship. Waited

6 years to get into that program with addition of going to Owen's Community six years earlier to get certificates to help

my chances of getting into the program. Eventually got Associates in applied science. Acquired a class A CDL also

from there. All these jobs were out of hiring hall. None of them were permit positions. Have 3 more years on the job

experience working for multipurpose Fabrication, Machine weld shops like Dillin Engineered Systems, Brass works

INC, Transco Railway. Some of these job were out of a Temp Agency. My resume is already 6 pages so that’s why I

only put down most recent and Professional jobs.

These days I am looking for a steady long term position to be successful at and to contribute my efforts. Want to work

for a Company to call home. Sick of jumping Contractor to Contractor. If you are not familiar with how local unions

contractors work ill explain a little. You get a refer from the hall for a contractor go through orientation maybe take

some test. Then you go to work it could be a job that will last years or a couple days. After you finish the job you go

back to the hall and sigh the out of work book. Been to 45 states so yes I have been around. I want to stick to a

company by the Hip and become a company man.. There are other area in the skilled trades I am interested in if given

the chance. Quality Control, CWI- Certified Welding Inspector or CAWI - Certified Associate Welding Inspector. also

understand that this means more training and testing. I'm vary mechanically inclined. Have the work ethic tools and

intelligence to prove it. As of right now am trying to build a relationship with someone on LinkedIn and maybe join

your team.

Stephen M Brown Cell- 419-***-****

Boilermakers, Iron Shipbuilder

RMF Nooter, Inc.

January 2013 – April 2014 (1 year 4 months)Toledo, Ohio Area

Utilizing my mechanical abilities. Building Boiler,maintenance them. Working on steam turbines,condenser,super

heats,steam drums.Stick welding- Tig welding -Mig welding- cut and gouge, flux-core arc welding.beveling tubes.

Thinking and trying to work out problems that might come up.Experienced & Certified in the following

Bucket truck rescue,OSHA 30,Climbing steel structure, steel structure rescue, first aid, digger derricks, Registered

Flagger, Rigging, hand signal, personnel lift, Boom lift, Scissor lift,Fork lift, Excavator, chain falls, come alongs,

Scaffolding, Blue prints. 6 G pipe welder & tube Mig,Tig, Stick, confined space.

Boilermakers, Iron Shipbuilder

Washington Group International (now part of URS Corporation) DTE

October 2012 – July 2013 (10 months) Monroe, Michigan

Utilizing my mechanical abilities. Building Boilers, maintenance them. Working on steam turbines, condenser, super

heats, steam drums. Stick welding- Tig welding -Mig welding- cut and gouge, flux-core arc welding. beveling tubes.

Thinking and trying to work out problems that might come up. Experienced & Certified in the following

Bucket truck rescue,OSHA 30,Climbing steel structure, steel structure rescue, first aid, digger derricks, Registered

flagger, Rigging, hand signal, personnel lift, Boom lift, Scissor lift,Fork lift, Excavator, chain falls, come a longs,

Scaffolding, Blue prints. 6 G pipe welder & tube Mig,Tig, Stick, confined space.

Substation technician

Click to add a video, image, document, presentation...

New River Electrical Corp

September 2011 – October 2012 (1 year 2 months) Columbus, Ohio Area

Working with electrical engineers to design, construct and maintain a substation, the facility which collects power at

the generation site, connects to a transmission grid and downloads energy to a distribution network where the power is

delivered to the consumer. Bending conduit, climbing steel, phasing, hanging up panels, pulling wire through the

conduit, cad welding, wiring up switches. building substations from ground up. May types heavy equipment used.

Experienced & Certified in the following

Bucket truck rescue,OSHA 30,Climbing steel structure, steel structure rescue, first aid, digger derricks, Registered

Flagger, Rigging, hand signal, personnel lift, Boom lift, Scissor lift,Fork lift, Excavator, chain falls, come a longs,

Scaffolding, Blue prints. 6 G pipe welder & tube Mig,Tig, Stick, confined space.

Substation Technician

U. S. Utility Contractors

February 2011 – June 2011 (5 months) Perrysburg, OH

working with electrical engineers to design, construct and maintain a substation, the facility which collects power at

the generation site, connects to a transmission grid and downloads energy to a distribution network where the power is

delivered to the consumer. Bending conduit,climbing steel, phasing, hanging up panels, pulling wire through the

conduit,cad welding, wiring up switches. building substations from ground up. Many types heavy equipment

used.Experienced & Certified in the following

Bucket truck rescue,OSHA 30,Climbing steel structure, steel structure rescue, first aid, digger derricks, Registered

Flagger, Rigging, hand signal, personnel lift, Boom lift, Scissor lift,Fork lift, Excavator, chain falls, come a longs,

Scaffolding, Blue prints. 6 G pipe welder & tube Mig,Tig, Stick, confined space.

Certification

OSHA 30

6g pipe welder

Owens Community College

April 2008 – Present

Steel Structure Rescue

First Aid

Coyne First Aid

Registered Flagger

Heavy Equipment Hand Signals

International Brotherhood of Boilermakers

All position Tig welder.

Owens Community College

All Positions Mig Welder.

Owens Community College

Aerial Devices

Altec

American Traffic Safety Services Association.

American Traffic Safety Services Association (ATSSA)

July 2014 – Present

Scaffodling

International Brotherhood of Boilermakers

Rigging

American Line Builders (NECA)

Construction Safety and health

Occupational Health and Safety, License 30-003******

Steel Erection and Rigging

International Brotherhood of Boilermakers

Bucket Truck Rescue

American Line Builders (NECA)

OSHA #)

Occupational Health and Safety, License 30-600******

Crane Signal Requirements OSHA part 1926.1400

International Brotherhood of Boilermakers

Climbing Steel Structures

American Line Builders (NECA)

Scaffolding Erection & Dismantling

Steel Structure Rescue

American Line Builders (NECA)

Education

International Brotherhood of Boilermakers, Iron Shipbuilders,

2013 – 2014

Lineman Substation Apprenticeship

2011 – 2013

Resigned to get into the Boilermakers, Iron Shipbuilder Apprenticeship program.

Owens Community College

Associate’s Applied science. manufacturing

2007 – 2009

HONORS -for one semester. Got 2 6g cert from the STATE of OHIO for pipe welding.

Contact this candidate