ANDREW STUART GOODMAN

**** ********** *****

Fort Worth

Texas

*****-****

Cell: +1-469-***-****

Email: acgpsf@r.postjobfree.com

PROFILE

A highly qualified and experienced QHSE Professional, with extensive

knowledge and skills in Quality Assurance, Quality Control, Environmental

Management and Health and Safety, gained in a wide range of industrial

sectors. Enjoy working in a team environment where common objectives are

met. Main strengths include good communication, problem solving and strong

leadership skills that are demonstrated by my extensive experience in

supervisory positions. Therefore, eager to find a responsible appointment

that further develops existing skills and requires innovating thought.

CURRENT POST

Global Quality Specialist - Expro Group Aberdeen - March 2012 - to date

Main job function is to drive the strategic development and implementation

of a Global Quality Management System, including the design and development

of the system software.

Other accountabilities include providing worldwide regions, product lines

and functions, with advise, support and training to improve the overall

service quality capability and performance in delivering the business

objectives. Supporting the above mentioned regions and business units with

the development, management and continuous improvement of the Quality and

HSE management systems.

Principle Accountabilities include:

. Ensuring that the Group Quality Policy. Reporting and continuous

improvement tools are maintained and compiled across the organisation

. Acting as a global focal point for information and communication on

HSEQ critical tasks within the Group

. Maintenance and development of standards and procedures in line with

Group requirements

. Preparation of monthly performance reports for the Executive

Management Team

. Establishing and setting of Global EIO Objectives and Targets

. Supporting of high potential investigations and audits

. Development of continual Improvement tools

. Visiting of Worldwide regions and business units to perform site or

process quality & safety audits, including staff training

. Group custodian of the organisations Performance Improvement Reporting

system

. Group custodian of the organisations Management of Change system

. Global Manager for the Organisations QMS system (ISO 9001, 14001,

18001 & API Q1,Q2)

. Corporate trainer for process mapping, process re-engineering and

Management of Change

CAREER REVIEW - HIGHLIGHTS

Senior Quality Engineer (Bosch Rexroth Glenrothes) September 2006 - March

2012

Main responsibilities included verifying the ongoing process capability of

cells and other continuous processes within a high volume mobile hydraulics-

manufacturing unit. Employing over 300 people I'm responsible for 6

quality inspectors, which ensures the efficient running of the quality

department.

Main duties included:

. Implement process and product audits to monitor compliance to work

instructions and procedures.

. Apply statistical control techniques, where applicable.

. Ensures the efficient running of the calibration service and its record

system.

. Interfaces with Production Engineering department on the introduction of

new processes and approves their capability.

. Develops quality plans or inspection requirements for 'new' products or

processes.

. Communicates through meetings and reports all significant quality

problems encountered.

. Carries out all duties in accordance with the requirements of ISO9001/

TS16949 system.

. Ensures that all work completed is in accordance with the requirements of

all relevant health and safety legislation.

. An active member of the groups Project Engineering Committee.

. Lead auditor of the groups '5S' committee

. Delivery of reports to Senior Management on KPI's and Cost of Quality

. Department budget control

. 1st and 2nd party Lead Auditor to the Business

. Team member of "Starting Efficiency Project"

. Quality Champion for the Organisations Strategic MRB (Material Review

Board)

Group Quality Manager (United Fish Industries Ltd) September 2002 -

September 2006

Duties included carrying out specific analysis relating to the quality,

yield and consistency of the products, thus assuring the full potential of

the raw material and finished products. During my time there I overhauled

the quality system and made it a cross functional part of the company, of

which everyone is now involved. This has been rewarded recently with the

accreditation to the "Feed Materials Assurance Standard" (FEMAS); this

system now acts as part of the groups TQM system.

Principle duties included:

. To instruct and follow all environmental health and safety guidelines.

. Operate the company's HACCP system

. Customer and supplier liaison.

. Site coordinator for the company's Pollution and Prevention Control

licence (IPPC)

. Site representative in dealing with the Scottish Environmental Protection

Agency (SEPA)

. Group auditor for quality and HACCP at our other companies in Aberdeen

and Grimsby.

. Chemical stock control and calibration, I line with Good Laboratory

Practices (GLP).

. Arranging and attending 3rd party audits.

. Staff training in quality and HACCP principles.

. Budget control.

Q A Engineer / Deputy Quality Manager (Plastique Ltd) July 1999 - September

2002

Quality Engineer (Roscomac Ltd) May 1997 - July 1999

Quality Inspector/Auditor (Dynacast Ltd) Sept 1990 - May 1997

Mill Setter Inspector (Beam Tubes Ltd) January 1986 - Sept 1990

Furnace man (RSM Castings Ltd) June 1983 - January 1986

Logistics Inspector (Sir Alfred Mcalpine Ltd) December 1981 - June 1983

Rolling Mill Operator (British Steel Corporation) June 1978 - December 1981

.

QUALIFICATIONS

2012 Kelvin TOPSET - Certified Trainer to deliver the 1

day investigator course

2010/2011 Napier University - MSc Management Practice

2010 Andrew Carnegie Business College - CMI Executive Diploma in

Management

2009 Andrew Carnegie Business College - CMI Diploma in

Management

2004 The Royal Environmental Health Institute of Scotland - Intermediate

Food Hygiene diploma.

1999 - 2000 University of Northampton I.Q.A. [A12] Principles and

techniques of Quality Management.

1997 - 1998 University of Northampton - I.Q.A. [A11] 'Introduction to

Quality Assurance'.

1974 - 1978 Samuel Lloyd Comprehensive School - 7 GCE 'O' levels, including

English and Mathematics.

TRAINING

2013 IOSH - Managing Safety v3.1

2012 Kelvin TOPSET- Senior Investigator training

2012 The Expro Group - Wire line (Level 1)

2012 The Expro Group - Hydro-Carbon Well Test (Level 1)

2012 The Expro Group - Introduction to the Oil Industry

and Subsea operations

2012 The Robert Bosch Group - Dealing with Special

Characteristics

2012 The Robert Bosch Group - IT Security in

Manufacturing

2012 The Robert Bosch Group - Cisco WebX Training

2011 Oaktree Management Training - Technical Problem

Solving

2010 The Robert Bosch Group - Product Liability Training

2010 The Robert Bosch Group - Quality Assessment in the Project

Engineering Process

2008 Taylor Hobson Centre of Excellence - Practical & Theoretical aspects

associated with the Talyrond 365

2007 The Robert Bosch Group - TS16949 Lead Auditor Training

2007 Mitutoyo Ltd. Institute of Metrology - Cosmos

Scanner CNC

2007 Mitutoyo Ltd. Institute of Metrology - Geopak-Win

CNC.Version 3

2006 The Robert Bosch Group - Project Engineering Process

training

2006 MAHR Metrology - Pathometer and surface testing

2006 The Robert Bosch Group - S.A.P software training

2004 Train Shetland - Microsoft Access certificate.

2000 T.A.A Health and safety Consultancy - Risk Assessment Assessors

Workshop.

2000 Mitutoyo Ltd. Institute of Metrology - Geopak-Win

CNC.

2000 Castle Management Centre- Job Instruction

and Communication course.

1998 - 1999 The Kaizen Institute - Techniques in 'Kaizen' and 5s

Improvement events

1997 'CMTC Management Centre' - Quality Foundation

course.

1993 'Lanac Training Ltd' - Introduction to Statistical

Process Control.

ACHIEVEMENTS

2012 Institute of Administrative Management - Awarded

Fellow Status

2010 Chartered Quality Institute - Awarded Chartered Quality Professional

status

2010 Chartered Management Institute - Gold medal award for

outstanding achievement

2009 Chartered Management Institute - Awarded Chartered Member status

PERSONAL DETAILS

Nationality: British

ADDITIONAL ATTRIBUTES

. Member of the "Chartered Management Institute"

. Fellow of the "Institute of Administrative

Management"

. Member of the "Chartered Quality Institute"

. Full clean driving licence

. E.C. Passport

. Working knowledge of AutoCAD R14, MS Office

Professional, Windows NT, XP, Vista, Q Pulse, Geopak,

Stat soft, SAP, Minitab and Cosmos, EPITrak,

SAFETrak, Positive Intervention

. Fully Inoculated for worldwide travel

Contact this candidate