Glenn C. Hinrichsen

***** - **** ***. **,

206-***-****

Seattle, Wa 98155

Cell: 206-***-****

acg3az@r.postjobfree.com

_

CAREER PROFILE

Senior Piping Designer / Mechanical Designer

I have been in the chemical and thermal power field for 20 years,

working with AutoCad, Rebis 3D AutoPlant and Intergraph PDS. Assigning

and checking others work as various tasks are completed. Organizing and

maintaining the project to meet completion dates. Making sure that

drawings meet the companies current standards and guide lines. Verifying

equipment connections and making sure drawing follows the most current

marked up set of P&ID's from process. Running clash detection with all

models to ensure interferences are corrected prior to drawing being

issued for construction. Traveling to job sites to oversee installation

of piping and trouble shooting problems that arise that were not

addressed in the 3D model. Working with Foremen and superintendents on

job site, as well as Construction Engineers to maintain schedule and

quality of project. Acting as liaison between home office and

construction site as well as working with customer representative on job

site to solve customer requests including interpreting contract issues.

Issue Field Change Requests for approval by home office, review and

approve Field Notices of Change for back charges to

vendor/construction/engineering/customer for work having to be done that

was not within the original scope of work for the project or work that

had to be done due to piping design changes, vendor equipment that came

in not per certified drawings, construction locating equipment or piping

incorrectly. Supervising and checking others work to make sure the

completed drawings meet company and industry standards including good

sound design and drafting techniques. Mentoring of those at lower job

descriptions. I am highly motivated with good leadership skills, a self

starter. Having coordinated projects and the personnel assigned to the

project, assigning job tasks and organizing the project to keep it on

schedule. Including working with other disciplines, vendors, catalog cut

sheets and previous projects to obtain the information required to

complete the task.

PROFESSIONAL EXPERIENCE

Senior Piping Designer

Information Technology Systems (contracted to GE Water) 2011-

present

Hired to facilitate design of Water Treatment plants for use in the

oil and gas industry. Using Bentley 3D software. produced 3D models of

piping, equipment and structure for the projects. Produced 2D

drawings from 3D models for piping and equipment installation. Worked

with engineering team to keep project on time and schedule. Worked as

design lead for 2 projects, designing the piping and equipment and

structure in 3D models using Bentley 3D software. Checking equipment

from vendor drawings, checking models per vendor drawings. Working

with engineers to facilitate piping and equipment models for release

to fabrication shops.

Senior Piping Designer

Information Technology Systems (contracted to AH Lundberg) 2010

Hired to lead major project in Georgia, adding a large system to a

exisiting pulp mill. Using Bentley 3D software. produced 3D models of

piping, equipment and structure for the projects. Produced 2D

drawings from 3D models for piping and equipment installation. Worked

with engineering team to keep project on time and schedule. Worked as

design lead for 2 projects, designing the piping and equipment and

structure in 3D models using Bentley 3D software. Working with

engineers to facilitate piping and equipment models for release to

fabrication shops. Setting up the Bentley software, building specs for

future 3D projects.

Senior Piping Designer

Information Technology Systems (contracted to GE Water) 2007- 2010

Hired to facilitate design of Water Treatment plants for use in the

oil and gas industry. Using Bentley 3D software. produced 3D models of

piping, equipment and structure for the projects. Produced 2D

drawings from 3D models for piping and equipment installation. Worked

with engineering team to keep project on time and schedule. Worked as

design lead for 2 projects, designing the piping and equipment and

structure in 3D models using Bentley 3D software. Checking equipment

from vendor drawings, checking models per vendor drawings. Working

with engineers to facilitate piping and equipment models for release

to fabrication shops.

Cad Design Engineer

Pratt & Whitney

3633 136th Pl Se, #310 2005 - 2006

Bellevue, Wa 98006

Brought in to establish a Design department. Write procedure manuals

and standards manuals. Develop custom menus for mechanical and

P&ID's. Using AutoCad and Inventor 3d modeling establish stand

drawings and train personel on AutoCad. Work with engineering to

establish new product lines, sales presentations and customer

drawings.

Cad Design Engineer

Khulman Technologies

8607 219th St SE Suite A 2003 - 2004

Woodinville, Wa 98072

Job duties include setting up Engineering department, establishing

standards in department to facilitate manufacturing and decrease costs.

Company sells Autoclave units complete ready for use in customers

facility. Clean steam units and WFI units designed and installed in shop

from drawings created in Engineering. Working with local vendors to

fabricate parts for our assembly. Using AutoCad and SolidWorks 3d

modeling. Creating custom menus for AutoCad.

Piping Designer

Information Technology Systems (contracted to SNC)

2006- 2007

Information Technology Systems (contracted to SNC)

2004- 2005

SNC-Lavalin Thermal Power

15011 NE 36th St, Redmond, Wa 98052

2002 - 2003

Job duties the same as below, NEPCO employee's hired by SNC.

NEPCO 2001- 2002

Job duties the same as below, hired as direct employee from

Information Technology Systems.

Information Technology Systems (contracted to NEPCO)

2001- 2001

Designing and modeling Steam and Gas fired power plants in Rebis 3D.

Checking others work as various systems are completed. Making sure that

drawings meet the companies current standards and guide lines. Verifying

equipment connections and making sure drawing follows the most current

marked up set of P&ID's from process. Running clash detection with all

models to ensure interferences are corrected prior to drawing being

issued for construction. Traveling to job sites to oversee installation of

piping and trouble shooting problems that arise that were not addressed

in the 3D model. Working with Foremen and superintendents on job site,

as well as Construction Engineers to maintain schedule and quality of

project. Acting as liaison between home office and construction site as

well as working with customer representative on job site to solve customer

requests including interpreting contract issues. Issue Field Change

Requests for approval by home office, review and approve Field Notices of

Change for back charges to vendor/construction/engineering/customer for

work having to be done that was not within the original scope of work

for the project or work that had to be done due to piping design

changes, vendor equipment that came in not per certified drawings,

construction locating equipment or piping incorrectly.

Designer

Chemithon

5430 West Marginal Way S.W.,

Seattle, Wa 98106

1990- 2001

Currently trained in Intergraph PDS, Plant Design System, designing

plants in 3D, running isometric drawings and working with the data

base to update piping specifications. Have over 3000 hours on

Intergraph. Also trained in the use of Drawing Manager and

Microstation. Travel to job sites to oversee installation of piping

and vessels, including foreign travel. Use PDS on site to facilitate

the construction of plant.

Using AutoCad v14 design American Society of Mechanical Engineers

vessels from Engineers notes and calculations. Design skids for

vessels and piping by laying out the required piping for the vessels and

pumps located on the skid. Routing of piping that

interconnects with the skids in the plant. Work with the shop to

facilitate fabrication. Drafting of electrical schematics for control

panels and panel operated valves in the plant. Verifying of Bills of

Materials with P & ID's. Drafting of P & ID's for customer approval.

Revise and program AutoCad menu for more automated drafting.

Designer

Mini-Systems Associates (contracted to Chemithon)

12509 Bellevue-Redmond Way, Suite #100,

Bellevue, WA 98005

1990-1990

Design American Society of Mechanical Engineers vessels. Design and

draft piping for plant installation (isometric and ortho-graphic

piping assemblies). Check other drafters drawings for release to

the shop.

EDUCATION

Bellevue Community College, Bellevue, Washington

Associate of Arts, Drafting Technology, June 1977

MILITARY

Sergeant, United States Marine Corps, 1969-1973. Combat service in

Vietnam, 1970-1971. Honorable Discharge.

Contact this candidate