** ******** **, ***, ** ***** H: 603-***-**** C: 603-***-****

C: acg38g@r.postjobfree.com

ALLAN CLAY

Mechanical Designer

Work Experience 2014 Laar’s Heating Systems Rochester, New Hampshire

Mechanical Designer/Drafter using Solidworks 14 with Enterprise PDMWorks

• Worked on Mascot and Magnathrm Boilers, Creating Solid models, detail

drawings and Assembly drawings. The Company had a lot of the same parts

being used on other lines of boilers, so using Configurations for

Boms,assembly’s and model components was widely used, (works well).

2012-2014 Analogic Corporation Peabody, Massachuetts

Mechanical Designer/Drafter using Solidworks 14 with Enterprise PDMWorks

• Designed and detailed a Couch/Table that will be in an MRI machine and a

Radiation Treatment Machine.

The tables were 8’ and 10’ long sheetmetal. The design was fastened together

using perms and studs. Designed in a complex belt/pulley arrange-

ment and belt tensioner to move the tabletop into the bore of treatment and

imaging machines.

The purpose of the design was to enable patients to remain in one room for

both imaging and treatment, rather than moving the patient to several rooms,

less stress on patient and reducing treatment time.

2011-2012 FloDesign Wind Turbine Waltham, Massachusetts

Mechanical Designer/Drafter using Solidworks 12 with Windchill PDM

• Designed Modeled and Detail new Wind Turbine Shroud in the shape of a Jet

Engine Shroud that sets around the rotar and blades. Designed Ribs Spares

Struts and brackets for the Flap and Mixer Lobe Assembly’s Modified Shroud

skins with new designs added to the skins areo shape using lofting and rule

features in Solidworks. The work involved was with very complex geometry

shapes.

2011 Freudenberg Nok Northfield, New Hampshire

Mechanical Designer using Solidworksd 11 and Unigraphics NX5

• Designed Gripper plates used to pick and place molded components from a

mold using Unigraphics NX5.

• Designed a Leak test and Engraving machine to inspect and mark seals used

in the automotive industries using Solidworks 11.

2008-2011 American Science and Engineering Billerica, Massachusetts

Mechanical Designer II using Solidworks 10 with Smarteam and AutoCAD 2010

• Assigned to the Cargo Group Inspection Systems for Trucks and Cars.

Vehicles are X-Ray scanned to detect for explosive devices, drugs and illegal

cargo. Responsible for modeling, design, documentation and large assembly

management using configurations, display states and envelopes to control

large assemblies and achieve better performance. Most of the work I was

involved in was with large walk-in sheetmetal enclosures built of sheet metal

and tube steel. Also worked with smaller sheetmetal enclosures and brackets

for electrical components.

• Assigned to the ECOs implementation group.

• Processed ECOs from simple drawing and bom change to complex redesign

change. Responsible for writing ECOs and making changes necessary to

complete project.

2007-2008 Cambric Corporation Wakefield, Massachuetts

Mechanical Designer III using Unigraphics NX4 w/Teamcenter and Solidworks

2007

• Responsible for designing using UG NX 3D models from 2D legacy Data on

Companies A10 Wing Program for the USAF.

• Created all model Data Sets in Teamcenter as well as all Legacy Revision

information.

• Responsible for Electrial/mechanic Machine Device Design and Details using

Solidworks for various Commercial and industrial customers.

2004-2006 Goss International Durham, New Hampshire

Mechanical Designer using UG NX4

• This Company builds large printing presses and folders for the newspaper and

magazine industry.

• Designed sheet metal guarding for drive belts, doors and panels. Built large

assembly layouts using Shafting, bearings, cams, weldments, sheet metal,

etc. Assemblies worked with ranged from 200 to 7000 part assemblies. All

modeling was sketch driven in one file with drafting being done in another file.

2004-2006 DePuy Spine, Johnson & Johnson Raynham, Massachusetts

Designer Designer using UG NX2

• Worked on the Bobcat Cervical Implant project. Involved in the design of new

implants (cage) for cervical area C1 through C7, sizes small, large and Xlarge

implants, height range 18mm through 66mm.

• Designed a new Distracter Implant Inserter, Trials and Bone graft instruments

to go with Bobcat Implants.

• Responsible for accurate cad models, design, assembly and detail drawings

using UG Sketcher with parts families.

2003-2004 Gillette Corporation S. Boston, Massachusetts

Design Designer using UG NX2

• Designed involved castings sheet metal and plastic parts.

• Designed Carrier/Magazine assembly for automatic handling system used for

loading and unloading components to be assembled for a new product line.

• Designs involved design concepts, modeling and drafting of castings, complex

plastic layers, sheet metal machined parts and go/no go gages.

2002-2003 DePuy Spine, Johnson & Johnson Raynham, Massachusetts

Designer Designer using UG V18

• Designed a Bone Marrow Aspiration Handle made of plastic with stainless

steel needle, which extracts bone marrow from the hip area.

• Designed a new generation of concentrator which is a mixer for bone marrow,

saline and a blood clotting solution that is formed into a gel which is inserted

into the spinal column area to fuse together with bone.

• All designs involved complex plastics components.

2001-2002 Hitchiner Manufacturing Amherst, New Hampshire

Mechanical Designer/Drafter using UG V18

• Designed wax molds for the aerospace and automotive industries. Wax molds

are designed to produce ceramics on ring molds which then creates a metal

casting.

• Designed single, double and quadruple cavity molds with manual and

pneumatic ejection systems, side action with wedge and cam pins, balanced

feeders etc. Work involved shrink prints: building customer models from

supplied prints, then proceeding with designing the mold to customer

specifications.

1996-2001 Gillette Corporation S. Boston, Massachusetts

Senior Designer using UG V16 and AutoCad 2000

• Designed complex plastic trays 400 X 600 mm for automatic handling system

used for loading and unloading.

• Designed a measure (test) fixture used to calculate dimensional locations.

• Designed a lifting tool used in manufacturing for lifting die components.

• Built a large die assembly which consisted of 700 (plus) parts using UG

assemblies.

• Did some freeform modeling for the Exccel sensor razor, the MACH3 Razor

and contributed in the modeling of the women’s new razor – Venus – which

went on the market in 2001.

1995-1996 Waters Company Milford, Massachusetts

Mechanical Designer/Drafter using Solidworks 14

• Designed entire test fixture for circuit boards.

• Designed and detailed plastic and sheet metal components for test units used

for breaking down blood and oils.

1994-1995 General Electric Company Lynn, Massachussetts

Onsite Mentor (for Unigraphics Solutions Support Services)

At the GE Jet Engine Plant

• Trained and instructed a group of Unigraphics users to be more productive in

their designs.

• Helped users in solving problems with freeform modeling, assemblies and

drafting.

Additional work history with the following companies – detailed information

upon request.

• General Electric Company – Schenectady, New York – Designer using UG

V12

• Johnson & Johnson Orthopedic Company – Raynham, Massachusetts

Senior Tool Designer using Unigraphics.

• UTC Pratt & Whitney Engines – E. Hartford, Connecticut – UGII Mechanical

Designer

EDUCATION

Extensive training and professional development coursework at a variety of locations from 1987

to the present including training on Unigraphics UGI and UGII 100.5, AutoCAD Rel 13 & 14,

Computervision CAD-System, machine tool technology, geometric dimensioning and tolerancing,

plastic part design, and GE Internal Drafting policies and procedures.

Mechanial Drafting Program, Whittier Technical School, Haverhill, MA – Drafting and Design

Certificate.

Welding and Machine Shop I and II certificates. Eight years manual drafting experience.

References Available

Contact this candidate