CHANDRA PRAKASH SHARMA [pic]

*/*, ** ******. **** ARJUN NAGAR, AGRA, UP-282001

Phone: 087********/ 087******** E-Mail: acg01z@r.postjobfree.com

Seeking assignments in Quality Management/ Testing & Inspection/ Repairs/

MECH ENGG/ Maintenance with frontline organization

PROFESSIONAL PROFILE

1. A dynamic professional with over 26 years of experience in Product

Testing & Inspection, Calibration, Quality Management of various

Aeronautical establishments & ships in Indian Navy and since 06 yrs

working as SR MGR/ MGR QA-QC IN PRIVATE FIRMS, NAMELY M/S FLOWMORE PVT

LTD -MANUFACTURING DIFFERENT CAPACITY OF HORIZONTAL & END SUCTION PUMPS.

1. SERVED FOR 21 Yrs, in the capacity of Senior Quality ASSURANCE inspector

( Engineering Mechanical).

1. Adapt at undertaking inspection of various aeronautical components to

determine if maintenance is necessary and the testing processors does not

have any detrimental effect on the materials.

1. Possess sound exposure in conducting NDT and Material inspection by

using UT, MT, LPT & Radiographic testing (INT), Inspection Mirrors,

Boroscopes, Dynascan, Magnifying glasses, fiber optics and interascopic

kits etc

1. Skilled in Standard Room operations and calibration of Precision

Measuring Equipments such as Vernier Calipers, Screw Gauges, Depth

Gauges, Bore Gauges, Height Gauges, Surface Plates, V-Blocks,

Clinometers, Dynamometer, Tensiometers, spring balances, Dead weights by

using slip gauges and Angular slip gauges and Master standard equipments.

1. Served the following positions with the Indian Navy;

2. Overall-in-Charge Air Engineering Workshop on INS Viraat.

2. Senior Supervisor on Sea Harrier Aircraft and PEGASUS Engine (Rolls

Roys U.K; Air

Engineering Department/ INAS 300, INS Hansa, Dabolim Airport, Goa

2. Overall-in-Charge {PEGASUS Engine {Rolls Roys, U.K}} Engine repair

shop, INS Hansa, Goa

3. A keen communicator endowed with problem solving and analytical

abilities

COMPETENCIES OVERVIEW

QMS Implementation

1. Developing Quality Plans and Quality Control Procedures in accordance

with contract requirements and applicable Codes and Standards.

1. Devising and implementing process & quality plan & reviewing analytical

documents, SOPs, general test procedures, protocols and their summary

reports.

1. Reviewing and ensuring standardizations of all contract documents that

pertain to the quality aspects of the work to be performed under the

contract.

1. Compiling and reviewing pertinent records of inspection and test for

individual job orders.

1. Ensuring implementation of HSE policy and HSE plan in my area of their

jurisdiction.

Testing & Inspection

6. Completing NDT operations using UT, MT, LPT & Radiographic testing,

Inspection

Mirrors, Boroscopes, Dynascan, Magnifying Glasses, Fiber Optics and

Interascopic Kits Etc.

6. Coordinating with Third party Inspection Agencies, Clients & conducting

Pre-Inspection meetings.

6. Inspecting work in progress for conformance & verifying that finished

work meets acceptance criteria.

6. Preventing non - conformance in process materials, during cutting, fit-

ups, welding, NDT, inspection and testing, painting and erection and

promulgating corrective actions for re-currences.

6. Ensuring Fit-ups are correctly made as per WPS and randomly checking

that Internal Release Note Information is correctly filled by the shop

foreman for proper tractability information.

6. Examining physical properties of materials and components at vendors end

to detect flaws and other imperfections leading to unreliability in

product performance or in product failure, ultimately remedial steps to

delights the Customers in long runs.

6. Third party inspection of POL:S, Spare Parts, Raw material, Finished

Goods purchased from external vendors. Internal and external audits of

various Naval Aviation establishment and ships, defect investigation and

defect

rectification on aircrafts, engines and its components.

Calibration

13. Responsible for calibrating, adjusting, repairing, reconditioning of

different types of precision equipments in Standard Room.

13. Performing witnessed calibration of various equipments for the disputed

cases in presence of legal authorities and ensuring all legal formalities

are fulfilled.

EXPERIENCE DETAILS

Since Aug'88 to DEC 08 with Indian Navy AS SENIOR QUALITY ASSURANCE ENGG,

Career Path

Joined as Aircraft Artificer

Promoted as Chief Mechanical engg

Last designation ; Senior Quality manager (Engineering, Mechanical)

Highlights;

1. Actively involved in Managing the following activities;

o Standard Room and calibration of Precision measuring equipments

such as Vernier calipers, Screw Gauges, Depth Gauges, Bore

Gauges, Height Gauges, Surface Plates, V-Blocs, Clinometers,

Dynamometer, Tensiometers, Spring balance, Dead weights by using

slip gauges and Angular slip gauges etc

o NDT and Material inspection by using UT, MT, LPT & Radiographic

testing (INT), Inspection

Minors, Boroscopes, Dynascan, Magnifying glasses, fiber optics

and interascopic kits etc.

o Calibration of Torque wrenches and Torque meters by digital

torque wrench tester and Dial test indicators.

o SOAP Test (Spectrometric Oil Analysis Program) of Aviation POLs,

Copper Strip corrosion

test, Kinetic Viscosity test of fluids(Fuel, oils) etc. in house

testing laboratories.

Significant Contributions

1. Obtained ISO 9001:2000 certifications for the company.

1. Brought down the rejection rate and pre matured failure rate of Aircraft

components of independent units?

1. Increased the rate of inspection, reduced the rejection and hence

increasing the productivity.

EDUCATION

Academic;

1. B.Sc part-i from Agra University, UP in 1987

1. PG Diploma in Personal Management and Human Resources Development. IIMM,

Pune in 2007

1. Diploma in Mechanical Engineering from Naval air technical school, Kochi

in 1992.

2. DEGREE IN MECH, ENGG, Specialisation in Quality Assurance/Control FROM

INDIAN-NAVY AFTER COMPLETING OF 20 Yrs OF SERVICE.

PROFESSIONAL ENHANCEMENTS

1. NDT Level II - In Ultrasonic Testing, Magnetic Particles Testing, Liquid

Penetrant Testing and Radiographic Testing (INT) of Materials.

1. Training on half Life Bay servicing of Gas Turbine Starter.' Aux. Power

Unit by M/S Lucas aero space (uk)

1. Performance test run of engine on test bad by M/S LUCAS AERO-SPACE LTD.

(U.K)

1. Calibration of Precision, Mechanical / Electrical Equipments by

RDD(U.K)

1. Calibration system Management course by CETE, Pune.

1. Diploma in Quality Management System: ISO 9001:2000(IRCA, U.K,

certified).

1. LEAD auditor for ISO 9001:200O (Q.M.S) (IRCA: U.K, certified).

1. Six Sigma, Green Belt Certification (IRCA, U K. certified).

1. Certified diploma in Disaster Management from Nirmala Niketan College of

social Works Mumbai (Affiliated to Mumbai University)

1. Leadership and Management courses from INS Agrani, Coimbatore.

1. Diploma in Fire and Safety Officer, Bangalore

2. PG DIPLOMA IN PM&HRM FROM IIMM, PUNE

COMPUTER PROFICIENCY

Diploma in Information Technology from C-DAC, Pune

MEMBERSHIPS/ ASSOCIATIONS

1. Associate Member of Aeronautical Society of India

1. Life Membership of Indian Society of Non Destructive Testing (NDT

field).

1. Member or ASCB (Europe) Quality Management system.

1. Member of Six Sigma Green Belt and Lead Auditor Certification for QMS (

IRCA, U.K)

PERSONAL DETAILS

Date of Birth : 15th July, 1971

Permanent Address : H. No - 1/5, JP Colony, West Arjun Nagar, Dist-

Agra, State - Uttar Pradesh - 282 001

LASTELY WORKED AS A SNR, MGR QA/QC-IN M/S- FLOWMORE PUMPS LTD,

Ghaziabad.FROM JAN-2011 TO TILL TODATE.

JOB IS TO deal with stage inspections during manufacturing/NDT/Heat

treatment processes, stress relieving/welding inspections & quality

assurance IN casting / forgings/ FABRICATIONS QUALITY ASSURANCE/CONTROL

CHECKS, inspections and final assy, performances tests / third party

inspections/stage- inspections, BY M/S- NTPC/BHEL/LLOYDS/sgs/quest/TPL/IRS

ETC. LOOKING AFTER, ALL Q M S FUNCTIONS WITH TEAM OF 18 EFFICIENT QUALITY

INSPECTORS/ DOCUMENTATION PART/CAPA/ISO 9001:2008 QMS / 18001/ OHAS/ 5 S-

REQUIRMENTS/ /SAFETY CONCERNS/STD - ROOM OPERATIONS/ DYNAMIC BALANCING OF

IMPELLERS/ HYDRO-TEST FOR SOUNDNESS OF CASINGS-VOLUTES/ VENDOR

ASSESMENT/internal audits/follow-up actions/ continual improvements

forecasting policies etc

SALARY DRAWN. 6.5 LACS PER ANNUM (CTC)

PASSPORT NO- G2621971

EXPECTED SALARY - 7-7.5 LACS PER ANNUM(CTC)

Contact this candidate