SHAWN PARSONS C.E.T

***** *** ******

Edmonton, Alberta

T6J 0J6

1-780-***-****

acfs9c@r.postjobfree.com

PERSONAL SKILLS

Over ten years in QA/QC, Turnaround inspections, inspection planning

and refinery reliability tasks. Primary work involves inspections of

in-service pressure vessels and piping, Piping and vessel fabrication,

and structural fabrication and/or repair. Certified Engineering

Technologist in Alberta, Canada.

. Good knowledge of all local jurisdiction laws, codes, standards, and

regulations.

. Good knowledge of corrosion and welding, including: corrosion related

damage mechanisms, base metals, filler metals, heat treatment, welding

metallurgy, weld and corrosion testing, fabrication planning, and

welding repairs

. Developing, when necessary, multidiscipline Inspection and Test Plans

for Owner/Client specific requirements

. Strong support and direction to the Quality team and project teams as

required and support resolution of conflicts through effective

interface with the Area Managers,

. Assist with developing, implementing, and maintaining the pressure

vessel and piping inspection plan together with engineering and

corrosion specialist support.

. Strong desire to learn

. Able to work constructively as part of a team or individually

. Very capable with computers and learning new programs, efficient in

Microsoft operating programs Word, Excel, Powerpoint, and Outlook.

. Able to manage tasks in order to accomplish goals in a safe and

efficient manor

. Experience in fabrication, construction, and plant maintenance

environment

. Diverse knowledge of piping and vessel operations for oil and gas

plants

. Strong knowledge with ASME, API codes and ABSA requirements

. Prepare and issue NCR (Non Conformance Reports) resolve by developing

and implementing corrective measures

EDUCATION

. MATERIALS ENGINEERING TECHNOLOGY (N.A.I.T.)

V API 510 Pressure Vessel Inspector Cert # 36228

V API 570 Pressure Piping Certification Cert. # 65037

V CWB Visual Inspector Level II (ASME 31.3, Sec. VIII & IX) REG #

4504

V CWI Visual Inspector (American Welding Society) Cert # 01006007

V Magnetic Particle Inspection Level II (CGSB/ASNT) REG #

12138

V Liquid Penetrant Inspection Level II (CGSB/ASNT) REG #

12138

WORK EXPERIENCE/ HISTORY

Aug. 2014 - Present TIR Canada

QA Mechanical Supervisor

-Conoco Phillips, Surmont Phase 1

- Provide leadership and management to Quality Inspectors and Quality

Administrators

- Audit and review of construction turnover documentation from

contractors for welding and fabrication.

- Review and final acceptance in representation of Conoco Phillips on

turnover packages with ITP's, AB-40 (ABSA), AB-83 (ABSA) for

fabrication, assembly, and repair

- Inspection and surveillance on welding and fabrication

- Coordinating and planning third party companies for NDE (EC, UT,

LPI, MPI, and RT)

- Witness hydro-testing and sensitive leak tests.

June. 2013 - June 2014 Aker Solutions (CNRL)

In-service Inspector

- Canadian Natural Resources Ltd, Horizon site.

- Perform inspection tasks and schedule monitoring programs to assure

the mechanical integrity of various types of pressure equipment

- Maintain permanent and progressive records of all pressure vessels

and pressure relieving devices, including adding new information

pertinent to the operation, inspection, and maintenance history of the

equipment

- QA inspections and report writing on pressure vessels (internally)

and pressure piping during shutdown.

- Review and final acceptance in representation of CNRL on turnover

packages with ITP's, AB-40 (ABSA), AB-83 (ABSA) for fabrication,

assembly, and repair

- Coordinating and planning third party companies for NDE (EC, UT,

LPI, MPI, and RT)

- Provide leadership and management to Quality Inspectors and Quality

Administrators

- witness hydro-testing and sensitive leak tests.

Aug. 2012 - June 2013 Aker Solutions (CNRL)

QA Planner

- Canadian Natural Resources Ltd, Horizon site.

- QA planning for 2013 Turnaround

- Construct turnover packages with ITP's, AB-40 (ABSA), AB-83 (ABSA)

for fabrication, assembly, and repair

- Review all Welding Procedure Specifications and quality manuals from

shutdown contract companies in representation of CNRL

- Coordinating and planning third party companies for NDE (EC, UT,

LPI, MPI, and RT)

Jan. 2012 - July. 2012 Acuren

In-service inspector

- Imperial Oil, Strathcona Refinery, Edmonton, Alberta

- Area lead inspector for turnaround, on-stream inspection and

internal inspections for pressure equipment and piping.

- Perform inspection tasks and schedule monitoring programs to assure

the mechanical integrity of the equipment

- Maintain permanent and progressive records of all pressure vessels

and pressure relieving devices, including adding new information

pertinent to the operation, inspection, and maintenance history of the

equipment

- Inspection and surveillance on welding and fabrication, as well as

auditing turnover packages from contractors.

- Construct work packages and witness hydro-testing and sensitive leak

tests

Nov. 2011 - Dec. 2012 FT Services

Quality Control Inspector

-Nexen Long Lake, Fort Mcmurray, Alberta (Projects)

-Construct turnover packages with ITP's, AB-40 (ABSA), AB-83 (ABSA)

for fabrication, assembly, and repair.

-Advise on all matters relating to inspection and quality control

through the front-end planning, construction, and turnover phases of

the project

-Visual inspection and weld mapping for piping and Vessel fabrication

or repair.

-Construct work packages and witness hydro-testing and sensitive leak

tests.

-Coordinating and planning third party companies for NDE, Hydro-

testing and Machining, to fulfill needs of client and ASME code

Sept. 2011 - Nov. 2011 Acuren

Quality Assurance Inspector

-Syncrude (ie. Exxon Mobil), Fort Mcmurray, Alberta (Shutdown)

-Visual inspection and report writing for piping and Vessel

fabrication or repair.

-Inspection and surveillance on welding and fabrication, as well as

auditing turnover packages from contractors.

-Performing MPI and LPI on Vessels, piping, and structural steel in

accordance with Syncrude, and ASME specifications.

-Ultrasonic thickness measurements on vessels and Piping for

corrosion/erosion monitoring and to establish remaining life.

Feb. 2011 - Jul. 2011 Acuren

Quality Assurance Inspector

-Suncor, Fort Mcmurray, Alberta (Maintenance In-service Inspector)

-Manage day-to-day operations with maintenance team to address any

concerns from engineers and operations in regards to all ABSA

registered equipment including rotating equipment, ASME piping,

Structural steel, and storage tanks.

- Area lead inspector for turnaround, on-stream inspection and

internal inspections for pressure equipment and piping.

-Advise on all matters relating to inspection and quality control

through the front-end planning, construction, and turnover phases of

the project

- Perform inspection tasks and schedule monitoring programs to assure

the mechanical integrity of the equipment

- Maintain permanent and progressive records of all pressure vessels

and pressure relieving devices, including adding new information

pertinent to the operation, inspection, and maintenance history of the

equipment

-Visual inspection and report writing for in-service equipment in

Sulfur Upgrading Plants.

-Inspection and surveillance on welding, hydro-testing and

fabrication, as well as auditing turnover packages from contractor

Flint-Transfield Services.

Oct. 2010 - Feb. 2011 Metalcare (CNRL)

Quality Assurance Inspector

-CNRL, Horizon site (Maintenance In-service Inspector)

- Area lead inspector for turnaround, on-stream inspection and

internal inspections for pressure equipment and piping.

- Perform inspection tasks and schedule monitoring programs to assure

the mechanical integrity of the equipment

- Maintain permanent and progressive records of all pressure vessels

and pressure relieving devices, including adding new information

pertinent to the operation, inspection, and maintenance history of the

equipment

-Visual inspection and report writing for in-service equipment in

Secondary Upgrading Plants.

-Inspection and surveillance on welding, hydro-testing and

fabrication, as well as auditing turnover packages from contractor.

-Manage day-to-day operations with maintenance team to address any

concerns from engineers and operations in regards to all equipment

including rotating equipment, ASME piping, Structural steel, and

storage tanks.

Nov. 2008 - Oct. 2010 Acuren

Quality Assurance Inspector

-Syncrude (ie. Exxon Mobil) Fort Mcmurray, Alberta

-Visual inspection and report writing for piping and Vessel

fabrication or repair.

-Inspection and surveillance on welding and fabrication, as well as

auditing turnover packages from contractors.

-Performing MPI and LPI on Vessels, piping, and structural steel in

accordance with Syncrude, and ASME specifications.

-Ultrasonic thickness measurements on vessels and Piping for

corrosion/erosion monitoring and to establish remaining life.

Aug. 2008 - Nov. 2008 Edmonton Exchanger

Quality Control Inspector

-Alberta Envirofuels, Edmonton, Alberta (SHUTDOWN)

-Construct turnover packages with ITP's, AB-40 (ABSA), AB-83 (ABSA)

for fabrication, assembly, and repair.

-Visual inspection and weld mapping for piping and Vessel fabrication

or repair.

-Construct work packages and witness hydro-testing and sensitive leak

tests.

-Coordinating and planning third party companies for NDE, Hydro-

testing and Machining, to fulfill needs of client and ASME code.

Mar. 2008 - July 2008 MELLOY Industrial Services

Quality Control Inspector

-Dow Chemical, Lacombe, Alberta (SHUTDOWN)

-Construct turnover packages with ITP's, AB-40 (ABSA), AB-83 (ABSA)

for fabrication, assembly, and repair.

-Visual inspection and weld mapping for piping and Vessel fabrication

or repair.

-Construct work packages and witness hydro-testing and sensitive leak

tests.

-Coordinating and planning third party companies for NDE, Hydro-

testing and Machining, to fulfill needs of client and ASME codes.

-Coordinate other QC inspector's work and responsibilities.

-Auditing of all documents and NDE reports.

Aug. 2007 - Dec. 2007 ACUREN

Quality Control Inspector (LEAD)

-Opti-Nexen, Fort Mcmurray, Alberta (Long Lake)

-Visual inspection and weld mapping for piping and vessel fabrication.

-Construct turnover packages with ITP's, AB-40 (ABSA), AB-83 (ABSA)

for fabrication, assembly, and repair.

-Assisted with weld inspection and NDE mapping for turnover packages.

-Construct work packages for hydro-testing.

-Coordinate NDE for code compliance and review NDE reports.

May 2007 - Aug. 2007 ACUREN

Quality Control Inspector (LEAD)

-Suncor, Fort Mcmurray, Alberta

-Manage day-to-day operations with maintenance team to address any

concerns from engineers and operations in regards to all equipment

including rotating equipment, ASME pressure piping, Structural steel,

and storage tanks.

-Construct turnover packages with ITP's, AB-40 (ABSA), AB-83 (ABSA)

for fabrication and assembly.

-Visual inspection and weld mapping for piping and Vessel fabrication

or repair.

-Construct work packages and witness hydro-testing and sensitive leak

tests.

-Coordinating and planning third party companies for NDE, Hydro-

testing, to fulfill needs of client and code requirements.

Sept. 2006 - Mar. 2007 ACUREN

Quality Control Inspector (LEAD)

-CNRL, Horizon site

-Visual inspection and weld mapping for pressure piping fabrication or

repair.

-Assisted with weld and NDE mapping for turnover packages.

-Witness and document closure welds in lieu of hydro-testing.

-Construct work packages for hydro-testing.

-Coordinate NDE for client and code compliance, and reviewing NDE

report for compliance.

Feb. 2006 - Apr. 2006 KBR (Halliburton)

Quality Control Inspector

-Syncrude (8-2 Coker SHUTDOWN)

-Visual inspection and weld mapping for piping and vessel fabrication

and/or repair.

-Assisted with weld and NDE mapping for turnover packages.

-Construct work packages for hydro-testing.

Dec. 2005 - Jan. 2006 EDMONTON EXCHANGER

Quality Control Inspector

-Syncrude (Plant 22-1 SHUTDOWN)

-Visual inspection and weld mapping for pressure piping and structural

steel construction.

-Assisted with weld and NDE mapping for turnover packages for ASME

31.3 piping.

-Coordinating and planning third party companies for NDE, Hydro-

testing, hydraulic torques, and Machining to fulfill needs of client

and ASME codes.

Aug. 1999 - Dec. 2005 ACUREN

NDE Technician

-Fort McMurray (Syncrude, Petro-Canada, Suncor)

-Performed MPI, LPI, PMI and other various non-destructive and

destructive tests for various clients.

-Thoroughly involved in failure reporting and investigation.

-Development of exemplary communication skills and profound ability

to use computers.

-Developed a respect for the implications and responsibilities of work

being completed (e.g. Quality control, code compliance, environmental

impact, safety, and contract fulfillment).

COURSES

- First aid course, OSSA Fall arrest, Confined space training and

monitor, H2S awareness, Construction safety training system, Radiation

training and awareness, FLHA training, Personal gas monitor, JLG and

man-lift training.

REFERENCES

Upon Request

Contact this candidate