Manager Engineer
Resume:
COVER LETTER
TO,
THE HR DEPARTMENT,
RATNAMANI TUBES & PIPES LTD,
ANJAR,GUJARAT.
Dear Sir/Madam/Hiring Manager,
This is with response to the position which I currently presume is lying open in your organization. I have a
combination of experience and skill that I believe match well with what your organization is seeking for this
initiative. A copy of my resume accompanies this cover letter and I would like to highlight here my qualities
and credentials I believe are most relevant to this position.
Result oriented with a fast learning curve and an ability to take calculated risks, defining business mission
and integrating resource strengths to deliver impeccable performances aligned to overall objectives. A
dynamic professional offering over 2 decades (20) years of experience in the field of Welding Supervisory in
the field of Welding Engineering. Through my tenure I have multiple records of success in getting initiatives
off the ground and flourishing it to the next level.
While my resume provides more specifics, my previous positions have enabled me to develop a high level of
skill and experience. I have very successfully maneuvered the delicate balance between the need for bold
entrepreneurial initiatives, and the application of sound business sense in my areas of responsibilities
Apart from my professional skills, over the period I have acquired technical skills in both hardware and
software applications. With my extensive experience and knowledge of business processes and software
applications, I believe I could make a valuable contribution to your team and help lead the organization to
further success.
I would be pleased to have an across the table discussion with you about my credentials in greater detail at
your convenience, or provide any additional information that would be helpful for you in assessing my
qualifications.
Thank you and I look forward to hearing from you.
Sincerely,
B MADHAVA RAO
B MADHAVA RAO
WELDING PROFESSIONAL
AIMING HIGH
Photograph
OVERVIEW
Present Job : JCO Pipe Mill (Jindal SAW Ltd.) Gujarat as Assistant Manager (Welding & Production)
Previous Job : Spiral Welding Pipe Mill (PSL) Limited as Engineer
Education : DME
DME
SUMMARY
SUMMARY
Targeting the Top
My name is B Mahadava Rao. I am a Result-oriented with a fast-learning curve and an ability to take calculated risks,
My
defining business mission and integrating resource strengths to deliver impeccable performances aligned to overall
defining
objectives. A dynamic professional offering over 2 decades (20) years of experience in the field of Welding Supervisory
objectives.
in the field of Welding Engineering.
in
• Acquired hands-on experience in performing at all levels of business and operations; honed skills in anticipating
and visualizing scenarios beforehand
and
• Excels in handling Qualification of Welding procedures etc.
Excels
• Splendid questioning and listening skills with ability to analyze responses, understand clients' needs and focus on
quality, precision & punctual delivery of results.
quality,
• Target and achievement oriented with an ability to take up challenges and perform in changing work environs.
Excellent technical expertise with abilities to provide exceptional customer services and support
Excellent
• Demonstrated capability in implementing preventive, planned and predictive maintenance to maximize uptime of
equipments and installations.
equipments
• Conceptually strong with an innovative and analytical approach to the work with an eye for detail. Enriched with
the ability to learn new concepts & technology within a short span of time.
the
• Self motivated, hard working and goal-oriented with a high degree of flexibility, creativity, resourcefulness,
commitment and optimism.
commitment
• Area of Interest: steel, Power, automobile, Oil Gas industries [production, Manufacturing
I am committed to Ethics, Integrity, Loyalty and commitment to the organization.
I am good at interpersonal, communication and organizational skills with proven abilities in enhancing,, optimizing
resources & capacity utilization, improving, resolving problems, ramping up the activities with on time deliverables and
resources
maximizing efficiency.
maximizing
I’m always open to conversation, networking with like-minded professionals or discussing future prospects. Connect with
me on Linked In or contact me at acf4su@r.postjobfree.com / acf4su@r.postjobfree.com
acf4su@r.postjobfree.com
CAREER PROGRESSION
DURATION COMPANY DESIGNATION
Since 2011 JCO Pipe Mill (Jindal Saw Ltd), Assistant Manager (Welding & Production)
Mundra, Gujarat
API 5L & ISI Certified Co.
1997-2011 Spiral Welded Pipe Mill (PSL Limited) Engineer
API 5L & ISI Certified Co.
1995-1997 SAW Pipes Limited (Jindal Seamless Tubes Artisan
Division) Nasik, Maharashtra
1992-1995 Swastik Fabrication & Machining Industry Fabrication Fitter
• Developing and implement plans & schedules for Welding, Operations and Annual Turn Around with focus on
optimum utilization of manpower and material, to tackle the problems related to the welding and preparing the
optimum
history card of machines.
history
• Monitoring the stock levels of consumables(SAW Wire,MIG Wire, Welding Flux) / spares / stocks at Warehouses
/ Stores & ensure timely procurement and replenishment of stocks
Stores
• Preparing Document Related to welding Acc To Party/client requirement
• Responsible for manpower handling, worked as shift Incharge.
• Prepare and maintain Document As Like PDR,PWPS,WPS,DPR,PQR
• To prepare daily/weekly/monthly welding report
• To qualify welder as per client requirement or as per code.
• TO attend 2nd & 3rd party inspection
TO
• Knowledge of different codes like ASME Sec IX; Sec-II part-C;API-5L 45th edition
• Knowledge of NDT test as like dye penetration; Radiography, UT;RT
• Knowledge of heat treatment process
SAP Responsibility:
• Production Planning of domestic, export and deemed export and Subcon sale order and tackle related transaction
for MRP-Run, Result review, Convert Planned order to production order or purchase requisition etc.
for
• Assign free stock of Raw material with sale order/line item according to sale order planning
Assign
• Assessing requirement and create purchase requisition, interface with the Purchase Dept for on time procurement
of technically approved purchased material.
of
• Daily activity like Goods issue, scrap booking, create reservation, activity conformation, Tackle Stoke in to under
welding department from store, quality inspection of purchasing materials and Raw Material which is used in
welding
project.
project.
• Check and done month closer activity at the end of month for technical close.
Industrial Achievement
• Drastically controlled weld defect in small dia. High thickness pipe applying welding engineering knowledge.
• Trained welder and delivered technical lectures.
• Carried out different trails using different wire and flux combination for choosing wire-flux combination.
• Optimized welding parameter for different thickness pipe and reduced flux wire consumption by 25%.
EDUCATION / PROFESSIONAL QUALIFICATIONS
Year D.M.E (EIILM University) Chennai
Year Completed ASNT Level 2 Certification from Southern Inspection Services-NDT.Visakhapatnam.
Year Welding inspection Course (CSWIP) completed from TWI London
PERSONAL VITAE
Date of Birth: 21st August, 1974
: Cell: +098********, 074********
: acf4su@r.postjobfree.com / acf4su@r.postjobfree.com
acf4su@r.postjobfree.com
Res: C10: Family colony, Nanakapaya Mundra Taluka, Kutch District, Gujarat - 370415
PERMANENT ADDRESS
Paidipadu (Post), Zarugumalli (Mandal), Prakasem (District), Andhrapradesh-523271.
Paidipadu
B MADHAVA RAO
: Cell: +098********, 074********
: acf4su@r.postjobfree.com / acf4su@r.postjobfree.com
Res: C10: Family colony, Nanakapaya Mundra Taluka, Kutch District, Gujarat - 370415
Date of Birth: 21st August, 1974
Welding Professional
Result-oriented with a fast-learning curve and an ability to take calculated risks, defining business mission and integrating
resource strengths to deliver impeccable performances aligned to overall objectives. A dynamic professional offering over
2 decades (20) years of experience in the field of Welding Supervisory in the field of Welding Engineering.
Acquired hands-on experience in performing at all levels of business and operations; honed skills in anticipating
and visualizing scenarios beforehand
Excels in handling Qualification of Welding procedures etc.
Splendid questioning and listening skills with ability to analyze responses, understand clients' needs and focus on
quality, precision & punctual delivery of results.
Target and achievement oriented with an ability to take up challenges and perform in changing work environs.
Excellent technical expertise with abilities to provide exceptional customer services and support
Demonstrated capability in implementing preventive, planned and predictive maintenance to maximize uptime of
equipments and installations.
Conceptually strong with an innovative and analytical approach to the work with an eye for detail. Enriched with
the ability to learn new concepts & technology within a short span of time.
Self motivated, hard working and goal-oriented with a high degree of flexibility, creativity, resourcefulness,
commitment and optimism.
Area of Interest: steel, Power, automobile, Oil Gas industries [production, Manufacturing
I am good at Effective interpersonal, communication and organizational skills with proven abilities in enhancing
production operations, optimizing resources & capacity utilization, improving, resolving problems, ramping up project
activities with on time deliverables and maximizing efficiency.
I am committed to Ethics, Integrity, Loyalty and commitment to the organization.
CAREER PROGRESS
DURATION COMPANY DESIGNATION
Since 2011 JCO Pipe Mill (Jindal Saw Ltd), Assistant Manager (Welding & Production)
Mundra, Gujarat
API 5L & ISI Certified Co.
1997-2011 Spiral Welded Pipe Mill (PSL Limited) Engineer
API 5L & ISI Certified Co.
1995-1997 SAW Pipes Limited (Jindal Seamless Tubes Artisan
Division) Nasik, Maharashtra
1992-1995 Swastik Fabrication & Machining Industry Fabrication Fitter
Developing and implement plans & schedules for Welding, Operations and Annual Turn Around with focus on
optimum utilization of manpower and material, to tackle the problems related to the welding and preparing the
history card of machines.
Monitoring the stock levels of consumables(SAW Wire,MIG Wire, Welding Flux) / spares / stocks at Warehouses
/ Stores & ensure timely procurement and replenishment of stocks
Preparing Document Related to welding Acc To Party/client requirement
Responsible for manpower handling, worked as shift Incharge.
Prepare and maintain Document As Like PDR,PWPS,WPS,DPR,PQR
To prepare daily/weekly/monthly welding report
To qualify welder as per client requirement or as per code.
TO attend 2nd & 3rd party inspection
Knowledge of different codes like ASME Sec IX; Sec-II part-C;API-5L 45th edition
Knowledge of NDT test as like dye penetration; Radiography, UT;RT
Knowledge of heat treatment process
SAP Responsibility:
Production Planning of domestic, export and deemed export and Subcon sale order and tackle related transaction
for MRP-Run, Result review, Convert Planned order to production order or purchase requisition etc.
Assign free stock of Raw material with sale order/line item according to sale order planning
Assessing requirement and create purchase requisition, interface with the Purchase Dept for on time procurement
of technically approved purchased material.
Daily activity like Goods issue, scrap booking, create reservation, activity conformation, Tackle Stoke in to under
welding department from store, quality inspection of purchasing materials and Raw Material which is used in
project.
Check and done month closer activity at the end of month for technical close.
Industrial Achievement
Drastically controlled weld defect in small dia. High thickness pipe applying welding engineering knowledge.
Trained welder and delivered technical lectures.
Carried out different trails using different wire and flux combination for choosing wire-flux combination.
Optimized welding parameter for different thickness pipe and reduced flux wire consumption by 25%.
TECHNICAL QUALIFICATION
Year D.M.E (EIILM University) Chennai
Year Completed ASNT Level 2 Certification from Southern Inspection Services-NDT.Visakhapatnam.
Year Welding inspection Course (CSWIP) completed from TWI London
WORK INSTRUCTION
• Production and Planning.
• Setting Less than Minimum Hours.
• Settings of the Pipe Mill as per Mill Parameters.
• Control of (Min – Max) Circumferences.
• After Production of the 1st pipe will be sent to R.T.R for checking the welding defects, accordingly to set the
Welding Parameters.
Contact this candidate