Post Job Free

Resume

Sign in

Power Generator Technician

Location:
Meridian, MS, 39307
Posted:
July 01, 2020

Contact this candidate

Original resume on Jobvertise

Resume:

Noah W. Shook

662-***-****

**** **** ***. ********, **. 39307

acf0ca@r.postjobfree.com

Objective

To succeed in an environment of growth and excellence and earn a job which provides me job satisfaction and self-development and to also help me achieve personal as well as organizational goals.

Experience

Aug 2014 - Present Halliburton, KBR, Al Udeid Air Base, Qatar

Power Generator Mechanic

Performs preventive maintenance on uninterrupted power supply systems, generators and air

compressors to maintain system operation and reliability to ensure uninterrupted power and

continuous air supply to critical facilities, equipment and systems. Demonstrates the ability to carry

out maintenance, install, operate, maintain, test and repair a variety of power generators to include

Cummings and Caterpillar. Repairs and maintains remote standby generator systems and prime power generators, to maintain and provide a reliable communications system and electric power to military as well as employees. Installs, repairs and maintains new and replacement generator systems to enhance communications systems reliability. Removes, relocates, repairs, installs and tests electrical equipment such as switches, conduit wiring, receptacle lights and circuits to maintain electrical power in government buildings and structures, detected shorts and defective connections, and restored operation of non-functioning equipment.

Feb 2014 ? Aug 2014 Tidewater, Meridian, Ms.

Facilities Foreman

Performed general maintenance and repair work on various systems within the state of Mississippi and Alabama for the National Guard and Reserve military facilities. Maintained and repaired constructional, electrical, and plumbing systems throughout the military facilities. Performed preventive and predictive maintenance on all areas of the facility to insure proper operation at all times. Replaced ballasts, light fixtures, motors, fans, switches, lights, and other related items. Repaired or replaced plumbing fixtures to include sinks, toilets, pipe systems, and general devices found in plumbing systems. Repaired walls, floors, doors and ceilings. Ensured proper weatherization of windows and exterior doors to prevent excessive energy loss. Checked for leaks within the water and steam systems and for proper operation of water heater, furnace and refrigeration appliances. Maintained storage organization and provided for safe and legal storage use. Repaired and replaced audio visual equipment for monitors and security systems. Responded to emergency repair situations as needed.

Jul 2012 - Jun 2013 ITT Exelis, Camp Arifjan, Kuwait

Power Generator Lead

Performed a full range of inspections, services, repairs and overhauls of power generators and special purpose equipment at the direct support and general support levels of maintenance. Maintained current state of the art principals, practices and procedures to be employed. Utilized wiring, hydraulic and circulation schematic diagrams, assisted mechanics on difficult electrical or mechanical problems requiring extensive troubleshooting, diagnosed the source of trouble and determines the extent of repairs required. Replaced worn or broken parts such as transformers, control boxes, magnetic pick up motion transducers, electronic engine speed control governors, switches, gauges, engines, bearings and other engine parts. Ensured work was completed and conformed to standards and requirements IAW technical manuals, army regulations, established processes and local SOP?s. Performed initial, in progress and final inspections on equipment undergoing maintenance to ensure proper assembly and repair processes are being employed. Performed daily safety inspections and assessments in the work area to mitigate present hazards, projected hazards and hazards associated with the tasks on hand.

Apr 2012 - Jun 2012 Prairie Opportunities Inc., Starkville, Mississippi

Weatherization Auditor

Responsible for supervising the rehabilitation and weatherization of homes in low-income housing and weatherization programs. Ensured all clients and the work performed were in compliance with all Federal, State and Agency regulations and guidelines pertaining to the weatherization program. Conducted home audits and final inspections of all work performed on homes under the Weatherization program. Identified, planned and estimated cost of fieldwork in ways which would efficiently address building deficiencies and achieve maximum energy savings according to State guidelines. Performed high quality lead-based paint inspections and prepared associated reports which were clear, thorough, and accurate. Supervised and instructed technicians and independent contractors effectively. Inspected contractors? work to ensure that all work performed was of high quality, completed according to the work order, and completed at a reasonable cost. Interacted and worked with clients in a professional manner, assesses client needs, makes appropriate referrals, and exemplified agency commitment to helping disadvantaged people. Responsible for general effectiveness, efficiency, and achievement of production goals by careful planning and coordinating of field work to achieve the general monthly and annual program goals and adherence to agency goals and policies. Responsible for security and maintenance of equipment used in the Weatherization department. Maintained daily mileage logs for the vehicle being driven. Conducted multiple tests to include diagnostic, depressurization, efficiency, carbon monoxide, water usage, blower door test.

Sept 2011 - Apr 2012 H&H Electronics, Scobey, Mississippi

Weatherization Construction Worker

Worked as part of a 6 member crew performing air sealing and insulation tasks at homes throughout Northern Mississippi according to the rules, regulations and policies of the state. Attended all required training to stay in compliance with state requirements. Installed as well as sealed air ducts, combustion air openings, or ventilation openings to improve heating cooling efficiency. Installed storm doors verifying proper fit. Applied weather-stripping, glazing, caulking and door sweeps to reduce energy losses. Prepared cost estimates or specifications for rehabilitation or weatherization services. Wrapped air ducts as well as water lines with insulating materials. Wrapped water heaters with water heater blankets. Applied spackling, compounding and other materials to repair holes in walls as well as under sink departments around plumbing. Cleaned as well as maintained all tools and equipment. Contacted residents or building owners to schedule appointments. Explained in depth recommendations, policies, procedures, requirements and other related information to residents or building owners. Maintained activity logs, financial transaction logs and other records of weatherization work performed as required.

May 2011 - Aug 2011 DynCorp International, Camp Wilson, Afghanistan

Power Generator Foreman

Lead power generation crews to maintain power generators, troubleshoot faults, repair/replace

components and generators, maintain documentation, adhere to environmental guidelines, and

ensure that all departmental processes were followed. Coordinated with various departments on

installations and generator replacements, scheduled outages, and daily operations. Ordered,

received, and monitored inventory of service and replacement parts for power generators. Optimized

the placement of generators through trend analysis of load data while adhered to property control

procedures for all equipment. Performed load calculations in order to properly size power generators

for various types of facilities. Interpreted and applied manufacturer repair manuals, technical

specifications, schematics, engineering drawings, and diagnostic tools. Knowledgeable to perform

maintenance on power generation equipment to include engine, alternating current (AC) alternators,

electronic controls, electrical wiring, and accessories.

Aug 2010 - Dec 2010 Combat Support Associates, Camp Arifjan, Kuwait

Force Protection Officer

Guarded designated posts and conducted roving patrols of the towers at ECP?s. Monitored and

ensured proper identification of military personnel, employees and visitors through access control

points. Maintained accurate entry and exit control logs and other required documentation as required.

Followed detailed instructions and procedures to accomplish work objectives in the performance of

routine and repetitive standardized tasks. Duties include deterring theft, pilferage, vandalism, arson,

and other acts or crimes against Government and company property. Observed, monitored and

reported any and all incidents and suspicious activities in a timely fashion to appropriate supervision.

Completed all required paperwork and logs in a timely and correct fashion. Maintained records of

assigned shift security post activities. Handled stressful situations and provided a high level of

customer service in a calm and professional manner. Maintained confidentially and adhered to

company and Government rules and regulations. Established and maintained effective working

relationships at all levels of the organization.

Oct 2009 - May 2010 Olgoonik Logistics, LLC, Mosul, Iraq

Power Generator Technician

Maintained inspection and maintenance records on generators and power systems to document

maintenance work and equipment replacement. Monitored weekly generator performance to maintain

communication system reliability. Assessed critical loads of power requirements to power sources

and generators to determine user needs of electrical and/or backup power. Planed and scheduled

corrective action and preventive maintenance to repair or modify defects and maintain operating

condition of facilities and equipment. Analyzed electrical circuits, wiring diagrams and drawings, and

installed, repaired, serviced or replaced electrical devices and systems to prevent overload.

May 2008 - May 2009 Combat Support Associates, Camp Arifjan, Kuwait

Force Protection Officer

Guarded designated posts and conducted roving patrols of the towers at ECP?s. Monitored and

ensured proper identification of military personnel, employees and visitors through access control

points. Maintained accurate entry and exit control logs and other required documentation as required.

Followed detailed instructions and procedures to accomplish work objectives in the performance of

routine and repetitive standardized tasks. Duties include deterring theft, pilferage, vandalism, arson,

and other acts or crimes against Government and company property. Observed, monitored and

reported any and all incidents and suspicious activities in a timely fashion to appropriate supervision.

Completed all required paperwork and logs in a timely and correct fashion. Maintained records of

assigned shift security post activities. Handled stressful situations and provided a high level of

customer service in a calm and professional manner. Maintained confidentially and adhered to

company and Government rules and regulations. Established and maintained effective working

relationships at all levels of the organization.

Mar 2007 - May 2008 Lear Siegler Inc., Mosul, Iraq

Power Generator QA/QC

Inspected, tested, evaluated, calibrated and updated generator systems and wiring to improve

reliability and to assure dependability and safety and compliance. Demonstrated ability to carry out

maintenance, install, operate, maintain, test and repair a variety of power generators to include but

not limited to Cummings, Perkins and Caterpillar. Detected fault hazards and the need for

adjustments. Disassembled engines and mechanical units to inspect parts and operating defects.

Installed specified new or reconditioned parts and/or make required adjustments and reassembled

complete unit.

Oct 2005 - Feb 2007 Halliburton, KBR, Camp Warhorse, Iraq

Power Generator Mechanic

Performed preventive maintenance on uninterrupted power supply systems, generators and air

compressors to maintain system operation and reliability to ensure uninterrupted power and

continuous air supply to critical facilities, equipment and systems. Demonstrated the ability to carry

out maintenance, install, operate, maintain, test and repair a variety of power generators to include

Cummings, Perkins and Caterpillar. Repaired and maintained remote standby generator systems

and prime power generators, to maintain and provide a reliable communications system and electric

power to military as well as employees. Installed, repaired and maintained new and replacement

generator systems to enhance communications systems reliability. Removed, relocated, repaired,

installed and tested electrical equipment such as switches, conduit wiring, receptacle lights and

circuits to maintain electrical power in government buildings and structures, detected shorts and

defective connections, and restored operation of non-functioning equipment.

Education

? U.S. Military Ordinance School, U.S. Army, Ft. Belvoir, Va.

Power Generation Technical School, 1991

? Grantham University, Slidell, La.

Business Administration, 2004

? AMES Christian University, Fort Myers, Fl.

Biblical Studies, 2012

Skills

Communications Skills Analytical & Research Skills

Teamwork Flexibility/Adaptability/Managing Multi-Tasking

Interpersonal Abilities Leadership/Management Skills

Planning/Organizing Multicultural Sensitivity/Awareness

Computer & Technical Literacy Problem-Solving/Reasoning/Creativity

Certifications

OSHA #510, Occupational Safety and Health Standards for the Construction Industry, 2007

10 Hour #001******-** Hour #600241206

OSHA #511, Occupational Safety and Health Standards for the General Industry, 2007

10 Hour #700******-** Hour #900095668

Basic Home Inspection, Professional Home Inspector Institute, 2013 #LMH30000020070

Advanced Home Inspection, Professional Home Inspector Institute, 2013 #AMH100000200068

Manufactured Home Inspection, Professional Home Inspector Institute, 2013 #MFH0000020074

Simple Home Construction, Professional Home Inspector Institute, 2013 #PHSH10000020071

Defect Recognition, Professional Home Inspector Institute, 2013 #DEFC0000020069

Structural Pest Inspection, Professional Home Inspector Institute, 2013 #PESH0000020072

Radon Measurement, Professional Home Inspector Institute, 2013 #PRDN0000020073

Residential Mold Inspector, Professional Home Inspector Institute, 2013 #CRMI0000020077

Commercial Mold Inspector, Professional Home Inspector Institute, 2013 #CCMI0000020078

Mold Remediation, Professional Home Inspector Institute, 2013 #CMR0000020076

Mold Remediation Protocols, Professional Home Inspector Institute, 2013 #PMRP0000020075



Contact this candidate