Page * / **

K.P.Yogesh

CURRICULAM VITAE

K.P.Yogesh, Passport no: Z 2388140

S/O Mr.K.Parasuraman, Place/date of issue: 20-04-2012

No 9/19, 5th Street, Nethaji Nagar, Expiry date: 19-04-2022

Beach Road, Ennore, Chennai – 600057, Nationality/ Marital status: INDIAN / married,

Ph: 0091-9940324996 (home) No of dependent: 6

0091-9941435442(mobile) Age & date of birth::34 & 10-03-1979

Email: aceuw1@r.postjobfree.com,

aceuw1@r.postjobfree.com

aceuw1@r.postjobfree.com

Objective: Painting / Coating supervisor / inspector / Client representative

Educational Qualification:

• Bachelor of Science ( CHEMISTRY )

SHRIDHAR UNIVERSITY, PILANI, RAJASTHAN, INDIA – 2013.

Technical Qualification:

. NACE Level – II CIP certification No : 17550

NACE Level - I CIP Certification No : 17550

Aramco ID No: 8876025-1,SAP # 70009683

NDT ASNT Level II (NDE CERTIFICATION )

i) Visual and optical Testing Certification No:VT/OCT/2013/008

ii) Ultrasonic Testing Certification No:UT/OCT/2013/008

iii) Radiographic Testing Certification No:RT/OCT/2013/008

iv) Magnetic Particle Testing Certification No :MT/OCT/2013/008

v) Penetrant Testing Certification No:PT/OCT/2013/008

vi) Eddy current Testing Certification No: ET/OCT/2013/008

. PIPELINE CORROSION PROGRAMME

Field of Expertise:

• 12 years experience in Blasting & Painting/coating of Marine Shipyards(like painting of cargo / ballast/

freshwater/double bottom storage/fore peak/aft peak/void/chemical/oil storage tanks, Hull/turret,

engine/pump room etc),Tanks/ pressure vessel (Internal / External Coating), FPSO/FSO conversion,

columns, Pipeline coatings. Steel Piping, Modularized/ Heavy Structures for On-shore /Off-shore Pipelays

& Platforms, Fire hydrants, Valves as per SAUDI ARAMCO Desktop/international standards.

Capable of handling international surface preparation and coating standards such as SSPC,NACE, ISO.

Knowledge in handling all international Grid blasting,airless/air spray equipment such as Clemco, Wiwa,

Graco etc & Hydro blasting/jetting.

Page 2 / 10

K.P.Yogesh

Able to do blasting and painting inspection using various types of instruments and gauges such as

surface profile gauge,DFT/WFT gauge, Pinhole/holiday detectors, Hygro meter, salt tester SCM 400,

Brestel batch, Pull off gauge (Banana gauge) dry film thickness gauge (Elcometer, positector, mikro test

etc.), Testex tape, Stylus guage, Dolly pull of gauge adhesion tester, Comparators, Shore D Test,hardness

Test, M E K Test, X Cut, Dyne Test, etc.

Experienced about paints such as oil based, alkyd, phenolic epoxy,surface tolarent epoxy,hybrid epoxy,

coal tar epoxies, Aluminium silicones, polyurethane coatings, MIO coatings, resins, chlorinated rubber,

vinyl, bituminized paints, inorganic zinc coatings, Tape Wrapping (Stopach),FBE(internal coating) &

galvanizing

Experienced in painting of stainless steel/carbon steel(with/without insulation,With low/high

temperature).

Knowledge about thermal spray process

Field Joint coating in Heat Shrink Sleeves Polyprophlene(PP), polyethylene, KLNN Wrapid Sleeve, FBE,

Injection moulded Polyurethene(IMPU), High Build Epoxy(HBE),Tape Wrapping, Stopach CZH Band,

CMPP(chemically modified polyprophlene.

Knowledge in pipelines coating, internal field joint, external coating, underground/buried pipelines,

cross country pipeline..

Inspects materials and quality of work of pipeline construction for conformance to specifications:

Observes preparation of right-of-way for conformance to contract agreement.

Examines bottom of trench for rocks or other hard objects that might damage pipe coating.

Observes coating and wrapping of pipe or pipe joints for conformance to specifications and verifies

accuracy of coating by observing or conducting electrical tests for holidays.

Technical & additional qualification:

Sl.No Course / Training Institution / University Place

1 Pipeline Corrosion NACE International Gateway of India section Mumbai, India

Programme

2. NDE certification ASNT II Scanstar Technology Chennai,India

3. NACE CIP Level II course NACE International Gateway of India section Mumbai, India

4. NACE CIP Level I Course NACE International Chennai, India

5. Advanced painting inspection IQC Training and Services Pvt Ltd Chennai, India

course

6. Painting Inspection Course IQC Training and Services Pvt Ltd Chennai, India

7. Safety Leadership Training Keppel Benoi Singapore

8. Safety Supervisor Course NTUC Learning Hub (Ministry of Manpower) Singapore

Computer Knowledge : MS Office, MS Word, MS Excel

Conversant with Code& Standards: NACE, SSPC,ISO, Saudi Aramco, Saipem, Maersk

OFFSHORE REQUIREMENTS (Holdings):

• Seaman book (Bahamas)

Page 3 / 10

K.P.Yogesh

• Yellow fever vaccination

• Police clearance certificate (pcc)

• Bosiet (Basic Offshore Safety Induction & Emergency Training)

• Medical certificate (fit for work)

Experience History : (Total 12 Years)

Period

Company Name & address Position

Sl No Certification

From To

BG Group

Mumbai (Offshore & Painting supervisor/

ISO 9001 Nov2013 May 2014

1

Onshore) Client Rep

SAIPEM S.P.A

M/S (Global Petroprojects ISO 9001& QA/QC Coating /

Dec 2010 Oct 2013

2

Services Ag) 2000 Painting Inspector

Veneziani paint(Italy) –

ISO 9001& Painting Inspector/

for SAIPEM SPA,DDW,

3 Sep 2009 May 2010

14000 Paint Representative

Dubai, UAE

Bright Engineering (Fasgroup Coating /Painting

4 Sep 2008 Aug 2009

ISO 9001

International), Alkhobar,KSA Inspector

ISO 9001

Clavon Engineering Pte Ltd,

5 Project co-ordinator Jan 2006 April 2008

Shipyard, Singapore

ISO 9001

Procoat Pte Ltd, Sembcorp QC Inspector

6 Oct 2001 Dec 2005

Shipyard, Singapore -Painting

Experience Summary :

1) From November 2013 to May 2014 ( OFFSHORE & ONSHORE )

Employer : BG Group

Location : Mumbai (Offshore & Onshore)

Certification obtained : ISO 9001

Project : Panna / Tapti Platforms

Position : Painting supervisor/ Client Rep

Manufacturer : Hempel, Sigma, Arma flake EHB, Jotun.

Material Handled : Surface tolerant epoxy filled with glass flakes, Polyamide/ Polyamine epoxy,

Polyurethane, surface tolerant self priming epoxy, Surface tolerant epoxy,

Glass flakes.

Duties & Responsibilities

• Lead permit-to-work system, exists between the Painting Contractor, the installation manager and/or the

master

• Oversee On-shore pre-mobilisation preparations.

• Contribute in building project/campaign specific execution plans.

• Lead contractor and internal weekly meeting to bring out key actions and highlight critical path activities.

Page 4 / 10

K.P.Yogesh

• the planning, preparation and execution of the works.

• Lead procurement and supply packages for Company provided items in coordination with engineering,

quality, contractor, HSSE and C&P teams.

• Interface with suppliers and contractors for resolving technical issues and ensuring on time delivery.

• Assist in developing Painting specification for different systems and assist in technical evaluation of bids.

• Coordinate with planner on developing level 6 schedules.

• Maintain check and Ensure that the contractors’ personnel are suitably experienced, qualified and

resourced for the positions proposed and the required project schedule.

• Liaise with the contractors with respect to the mobilisation and demobilisation of their assets and equipment

at site.

• Review and supervise implementation of all relevant worksite specific procedures (including work packs

and risk assessments) within planned cost and schedule.

• Perform duties in the capacity of Client Rep at offshore locations thus coordinating & managing overall

marine and project activities.

• Perform inspections of material and equipment (plus associated certification), being supplied and installed

by contractors to ensure they are fully certified and fit for purpose.

• Undertake regular progress measurement and reporting on activities to base and Plan for future activities

and resources in advance, and alert base office on any concerns in advance.

• Raise and resolve Site queries as necessary with the base technical team and maintain a record of the

same.

• Resolve and maintain /update records of punch list for all disciplines.

•Attending pre-job conference meetings.

*Review & verify all submittal product approval required as per specifications.

*Review the calibration status of all test instruments required.

*Verify certification status of all coating personel .

*Maintain quality procedure as Project quality plan.

*Maintain quality records,Inspection checklist etc.as required by the plan.

Inspecting applied insulation for conformance to specifications.

•

Corrosion under insulation project with removal and replacement of contaminated insulation and metal

•

works

2) From March 2013 to October 2013 ( OFFSHORE )

Employer : SAIPEM S.P.A

M/S (Global Petroprojects Services Ag)

Location : China (Offshore)

: Husky oil China LTD

Client

Certification obtained : ISO 9001& 14000

Project : LIWAN Deep Water EPCI Project

Position : QA/QC Coating / Painting Inspector

Manufacturer : Canusa CPS, Berry plastics, Spencer Coating Acothane.

Material Handled : GTS – PP(Polyprophlene), GTS – PE(polyethelene) & HBE Primer,

Powercrete R-95, Perp PP Patch & PE Patch, S 1137 Filler, PE & PP Melt

Stick 3LPE,3LPP Parental Coating Repairing Handled As per Specification

Duties & Responsibilities

• Preparing Daily/Weekly/Monthly progress Reports, Inspection Reports, Adhesion and Holiday Inspection

reports including performing /demonstrating the required tests & review of final inspection

records/dossier.

• Monitoring and recording the environmental conditions during blasting and painting application.

Page 5 / 10

K.P.Yogesh

• Conducting/ witnessing holiday /pinhole/pullout test to evaluate the paint defects.

• Witnessing chloride contamination test using bristle patch &estimation of chloride content as per

manufacturer recommendation.

• Checking/witnessing the paint characteristics using paint test panels with client/Third party inspector.

• Visual inspection of the steel members after blasting prior to painting.

• Witness for pre-heat & post heat process during polyprophlene,polyethylene, polyurethane,FBE.

• Done repair FBE, 3Lpp & 5LPP parental coating before hand over to production. Done repair as per

Specification.

3) From December 2012 to February 2013 ( OFFSHORE )

Employer : SAIPEM S.P.A

M/S (Global Petroprojects Services Ag)

Location : Nigeria (Offshore)

: Shell (Snepco)

Client

Certification obtained : ISO 9001& 14000

Project : BONGA North West Phase II

Position : QA/QC Coating / Painting Inspector

Manufacturer : Canusa CPS

Material Handled : KLNN Wrapid Sleeve & HBE Primer, 3LPE Parental Coating

Repairing Handled As per Specification

Duties & Responsibilities

• Witnessing chloride contamination test using bristle patch &estimation of chloride content as per

manufacturer recommendation.

• Checking/witnessing the paint characteristics using paint test panels with client/Third party inspector.

• Visual inspection of the steel members after blasting prior to painting.

• Checking the WFT /DFT& carrying out visual inspection for any coating acceptance..

• Monitoring the mixing of coatings and recording the batch ID of paint /Thinners.

• Inspection of blasting/painting equipment condition prior to use.

• about the safety of all persons during production & aim the job towards without accident.

• Planning for coating activities (surface preparation, painting, etc.) based on project drawings and

specifications& obtaining company

• Witness Final Inspection of galvanized coating as per ASTM 123. Witness for pre-heat & post heat process

during polyprophlene,polyethylene, polyurethane,FBE.

• Done repair FBE, 3Lpp & 5LPP parental coating before hand over to production. Done repair as per

Specification.

4) From May 2012 to August 2012 ( OFFSHORE )

Employer : SAIPEM S.P.A

M/S (Global Petroprojects Services Ag)

Location : Egypt (Offshore)

: Germanischer Lloyd(TPI)

Client

Certification obtained : ISO 9001& 14000

Page 6 / 10

K.P.Yogesh

Project : BURULLUS VIII B WDDM (Gas Project)

Position : QA/QC Coating / Painting Inspector

Manufacturer : Canusa CPS

Material Handled : KLNN Wrapid Sleeve & HBE Primer, FBE Parental Coating

Repairing Handled As per Specification.

Duties & Responsibilities

• Perform inspection in all stages of coating /painting as per the ITP/drawings/procedures.

• Preparation /verification of painting /blasting procedure as per client /international standards

• Maintaining calibration records of all painting instruments & updating the same.

• Preparation of the paint / abrasive consumption & monitoring the stock on day to day basis.

• Verification of abrasive size/type to achieve the required anchor profile /pattern as per datasheet

/procedure.

• Monitoring of paint /abrasive storage as per manufacturer recommendation & checking the batch no/ colour

& verifying paint product data sheet.

• Witness Final Inspection of galvanized coating as per ASTM 123. Witness for pre-heat & post heat process

during polyprophlene,polyethylene, polyurethane,FBE.

Done repair FBE, 3Lpp & 5LPP parental coating before hand over to production. Done repair as per

•

Specification

5) From August 2011 to April 2012 ( OFFSHORE )

Employer : SAIPEM S.P.A

M/S (Global Petroprojects Services Ag)

Location : Angola (Offshore)

Client : EXXON MOBIL

Certification obtained : ISO 9001& 14000

Project : KIZOMBA Satellite Project (Angola)

Position : QA/QC Coating / Painting Inspector

Manufacturer : Dow – Hyperlast, 3MScotchkote

Material Handled : FBE, Injection Moulded Polyurethene (IMPU),Tape wrapping,(chemically

modified polyprophlene(CMPP), 3LPP, 5LPP & FBE Parental Coating

Repairing Handled As per Specification.

Duties & Responsibilities

• Attend the progress/project/weekly meeting with client/sub contractor &scheduling the blasting /painting

activities for keeping the progress plan with project schedule/Quality.

• Witness blaster/ painter qualification test & review their qualification.

• Resolving NCR in all stages of painting /coating/blasting activity & follow up of corrective action

implementation in latter stages.

• Preparing Daily/Weekly/Monthly progress Reports, Inspection Reports, Adhesion and Holiday Inspection

reports including performing /demonstrating the required tests & review of final inspection

records/dossier.

• Monitoring and recording the environmental conditions during blasting and painting application.

• Conducting/ witnessing holiday /pinhole/pullout test to evaluate the paint defects

• Witness Final Inspection of galvanized coating as per ASTM 123.

• Witness for pre-heat & post heat process during polyprophlene,polyethylene, polyurethane,FBE.

Page 7 / 10

K.P.Yogesh

Done repair FBE, 3Lpp & 5LPP parental coating before hand over to production. Done repair as per

•

Specification.

6) From Dec 2010 to July 2011 ( OFFSHORE )

Employer : SAIPEM S.P.A

M/S (Global Petroprojects Services Ag)

Location : Nigeria (Offshore)

Client : TOTAL E & P PVT LTD (NIGERIA)

Certification obtained : ISO 9001& 14000

Project : USAN Deep Water Project (Nigeria)

Position : QA/QC Coating / Painting Inspector

Manufacturer : Canusa Cps, Dow – Hperlast, 3M Scotchkote

Material Handled : GTS – PP(Polyprophlene), GTS – 80 (polyethelene),

FBE, Polyurethene (IMPU), High Build Epoxy(HBE), Tape Wrapping (Stopach

CHZ Band), 3LPP & 5LPP Parental Coating Repairing Handled As per

Specification.

Duties & Responsibilities

• Resolving NCR in all stages of painting /coating/blasting activity & follow up of corrective action

implementation in latter stages.

• Preparing Daily/Weekly/Monthly progress Reports, Inspection Reports, Adhesion and Holiday Inspection

reports including performing /demonstrating the required tests & review of final inspection

records/dossier.

• Monitoring and recording the environmental conditions during blasting and painting application.

• Conducting/ witnessing holiday /pinhole/pullout test to evaluate the paint defects

• Witness Final Inspection of galvanized coating as per ASTM 123.

• Witness for pre-heat & post heat process during polyprophlene,polyethylene, polyurethane,FBE.

Done repair FBE, 3Lpp & 5LPP parental coating before hand over to production. Done repair as per

•

Specification.

7) From Sep 2009 to May 2010 ( FPSO Conversion Project)

Employer : Insignia Fze (supply to Veneziani Paints, Italy )

Client : SAIPEM S.P.A, Drydock World, Dubai,UAE

Certification obtained : ISO 9001& 14000

Project : Aquila Phase 2

Position : Painting Inspector/Paint Representative.

: All type of Epoxy (surface tolerant, solventless, phenolic), alkyd, chlorinated

Type of Paints Handled

rubber, vinyl, Galvanising, inorganic zinc rich epoxy, polyurathene, shop

primer,

Thermal spraying

Duties & Responsibilities

• Checking random surface profile readings on the blasted members with Testex tape.

• Checking the WFT /DFT& carrying out visual inspection for any coating acceptance..

Page 8 / 10

K.P.Yogesh

• Monitoring the mixing of coatings and recording the batch ID of paint /Thinners.

• Inspection of blasting/painting equipment condition prior to use.

• about the safety of all persons during production & aim the job towards without accident.

• Planning for coating activities (surface preparation, painting, etc.) based on project drawings and

specifications& obtaining company Witness Final Inspection of galvanized coating as per ASTM 123.

• Take care permits required for work.

• Plan & Allocation of proper day to day manpower, tool/tackles/machinery required to reduce the

production cost.and to complete the project in stipulated time frame.

8) From Sep 2008 to Aug 2009 ( ONSHORE )

Employer : Bright Engineering (Fas group international), Alkhobar, KSA.

(Supply to J&P, Saudi Aramco, KSA)

Client : Saudi Aramco

Certification obtained : ISO 9001

Project : Nuayyim GOSP ASL crude increment facilities, Plant X5,ASI Crude oil system,

Riyadh, KSA

Position : QA/QC Painting, coating & Insulation Inspector.

: Tape Wrapping (Stopach), FBE(internal coating), Aluminium silicone, Hybrid

Type of Paints Handled

epoxy

Duties & Responsibilities

• Perform inspection in all stages of coating /painting as per the ITP/drawings/procedures.

• Preparation /verification of painting /blasting procedure as per client /international standards

• Maintaining calibration records of all painting instruments & updating the same.

• Preparation of the paint / abrasive consumption & monitoring the stock on day to day basis.

• Verification of abrasive size/type to achieve the required anchor profile /pattern as per datasheet

/procedure.

Monitoring of paint /abrasive storage as per manufacturer recommendation & checking the batch no/

•

colour & verifying paint product data sheet.

Attending pre-job conference meetings.

•

*Review & verify all submittal product approval required as per specifications.

*Review the calibration status of all test instruments required.

*Verify certification status of all coating personel .

*Maintain quality procedure as Project quality plan.

*Maintain quality records,Inspection checklist etc.as required by the plan.

Inspecting applied insulation for conformance to specifications.

•

Ensure material storage and material test certificates are in accordance with project requirement

•

Carrying out supervision activities for Hot insulation works including review of project specifications.

•

Preparing and reviewing the method statement,work procedures,quality plan,safety plan and HSE risk

•

hazard analysis,involving coating,Hot insulation of vessels/piping/structural steel/Equipment as per

specification.

Corrosion under insulation project with removal and replacement of contaminated insulation and metal

•

works.

Carrying out insulation and metal work in a controlled environment, mainly mineral wool and stainless

•

steel cladding finish.

Page 9 / 10

K.P.Yogesh

9) From Jan 2006 to April 2008 ( ONSHORE )

Employer : Clavon Engineering Pte Ltd, Singapore

Certification obtained : ISO 9001

Client : Maersk, Diamond Offshore, Trans ocean, Prosafe, SBM, Ensco, Exon Mobile .

Position : Painting Supervisor / Project co-ordinator.

: Epoxy(solventless, phenolic), alkyd,chlorinated rubber,vinyl,inorganic zinc rich

Type of Paints Handled

epoxy,polyurathene,shop primer,coal tar epoxy

Client /Project :

a) Project involved in KEPPEL FELS

• OCEAN ROVER, ENSCO Semi Submersible,

• BP-BRITISH PETROLEUM,( B258) Semi Submersible,

• DIAMOND OFFSHORE.(R293) Semi Submersible,

• DDI DEEP DRILLING INVEST (B271) Semi Submersible,

• GULF DRILLING INTERNATIONAL(B268) Semi Submersible,

• MAERSK CONTRACTORS & ENSCO (B278) Semi Submersible,

• B280 Semi Submersible, B274 Semi Submersible, R303 Semi Submersible, R307,B281, B288.

b) Project involved in KEPPEL TUAS

• P53 FPSO Conversion Project, DOMY FPSO Conversion Project, UMUROYA FPSO Conversion Project, POLVO FPSO

Conversion Project, MONDO FPSO Conversion.

C) Project involved in KEPPEL Hitachy

SAXI FPSO Conversion Project, FRONTBUFFINE FPSO Conversion Project.

Duties & Responsibilities

• Preparation of the paint / abrasive consumption & monitoring the stock on day to day basis.

• Verification of abrasive size/type to achieve the required anchor profile /pattern as per datasheet

/procedure.

Monitoring of paint /abrasive storage as per manufacturer recommendation & checking the batch no/

•

colour & verifying paint product data sheet.

• Co-Ordinate with client /sub contractors/Third party inspectors on daily basis to resolve any Quality

issues/paint failures & provide solutions.

• Attend the progress/project/weekly meeting with client/sub contractor &scheduling the blasting /painting

activities for keeping the progress plan with project schedule/Quality.

• Witness blaster/ painter qualification test & review their qualification.

• Resolving NCR in all stages of painting /coating/blasting activity & follow up of corrective action

implementation in latter stages.

• Preparing Daily/Weekly/Monthly progress Reports, Inspection Reports, Adhesion and Holiday

Inspection reports including performing /demonstrating the required tests & review of final inspection

records/dossier.

10) From Oct 2001 to Dec 2005 ( ONSHORE )

Employer : Procoat Pte Ltd, Sembcorp shipyard, Singapore

Certification obtained : ISO 9001

Client : Stolts, British Petroleum, Pacific tankers, Petro Bras.

Position : QC Inspector -Painting.

: Epoxy (solventless, phenolic), alkyd, chlorinated rubber, vinyl, inorganic zinc

Type of Paints Handled

rich epoxy, polyurathene, shop primer, coal tar epoxy

Page 10 / 10

K.P.Yogesh

Project / Client :

a) Project involved in Stmarine yard,

• STOLT TANKERS.MAERSK CARGO.

b) Project involved in Jurong yard,

P38 FPSO Conversion Project, P40 FPSO Conversion Project, P43 FPSO Conversion Project, MODEC FPSO

Conversion Project,PETROBRAS FPSO Conversion Project, GLOBLE SANTA FE, Maersk B184 Jack-up, Maersk B185

Jack-up

Duties & Responsibilities

• Preparation of the paint / abrasive consumption & monitoring the stock on day to day basis.

• Verification of abrasive size/type to achieve the required anchor profile /pattern as per datasheet

/procedure.

Monitoring of paint /abrasive storage as per manufacturer recommendation & checking the batch no/

•

colour & verifying paint product data sheet.

• Co-Ordinate with client /sub contractors/Third party inspectors on daily basis to resolve any Quality

issues/paint failures & provide solutions.

• Attend the progress/project/weekly meeting with client/sub contractor &scheduling the blasting /painting

activities for keeping the progress plan with project schedule/Quality.

• Witness blaster/ painter qualification test & review their qualification Checking random surface profile

readings on the blasted members with Testex tape.

• Checking the WFT /DFT& carrying out visual inspection for any coating acceptance..

• Monitoring the mixing of coatings and recording the batch ID of paint /Thinners.

• Inspection of blasting/painting equipment condition prior to use.

• about the safety of all persons during production & aim the job towards without accident.

• Planning for coating activities (surface preparation, painting, etc.) based on project drawings and

specifications& obtaining company Witness Final Inspection of galvanized coating as per ASTM 123.

• Take care permits required for work.

• Plan & Allocation of proper day to day manpower, tool/tackles/machinery required to reduce the

production cost.and to complete the project in stipulated time frame.

Contact this candidate