PROFESSIONAL RESUME
David Allen Burke
** ********* ***, ******* ******* 47421
PH: 702-***-****
Email: acejd6@r.postjobfree.com
PROFESSIONAL OBJECTIVES
As a construction quality professional, I have 30 plus years of heavy civil
construction experience. My experience and training was primarily in
quality control, quality assurance and field engineering oversight role,
which was accumulated on large scale highway paving, bridge construction,
and Hydro & Coal Electrical Power Projects. My career goals and objectives
include supporting the quality and safety culture for successful completion
of large complex projects that require detailed planning, team building,
effective communication and execution.
My diverse working knowledge in construction methods, materials testing and
inspection (i.e., geotechnical, concrete and asphalt, structural etc.),
inspection and testing plan development, inspection checklist development,
and subcontractor surveillance throughout my career will promote the
necessary oversight role to effectively support construction effort,
maintain schedules, continuously improve and assist the team in a
preventative working culture.
PROFESSIONAL EXPERIENCE
Hydro-Electric Power Stations
Project: Meldahl Hydro Electrical
Employer: MWH Americas
Client: American Municipal Power INC
Job Title: Civil Engineer - Field
Description of Duty: The Meldahl project included installation of three
35-megawatt bulb turbine generator units and other complex equipment. The
Voith Hydro turbine generators were housed in a submersible powerhouse
constructed with 109,000 cubic yards of reinforced concrete. The
contractor team constructed a 1,850-foot-long approach channel that will
direct water from the river into the powerhouse.
To prepare the site, the team excavated portions of more than one million
cubic yards of rock. Groundwater seepage was proving to be a challenge.
To remove water from the site, the team used deep-well and electric pumps
to discharge up to 5,500 gallons per minute. Additionally, the pumps were
operated around the clock to prevent flooding of the project site.
Featured, approximately 40,000 square feet of Doka's pre-assembled Top 50
gang formwork. The project design required three horizontal draft tubes
with a conical shape starting with an approximate diameter of 36'-6" and
transitioning into a rectangle at 59' x 54', with a total length of 91'-
9. Assignments included but were not limited to providing construction
oversight and QA inspections for civil and structural components
throughout.
Project: Rainbow Redevelopment Project
Employer: Washington Group Intl/URS Great Falls MT
Client: PPL
Job Title: Construction management team QA manager and lead
civil/structural inspector.
Description of Duties: New construction of 65MW hydro facility with
17miles of new transmission lines, three substation replacements or
retrofit. Assignments included but were not limited to providing
construction oversight and QA inspections for civil and structural
components throughout consisting of cofferdam construction, power canal
construction, penstock installations, powerhouse construction etc.
Gas Power Electric Generating Station
Project: South Point Energy Center, Mohave Valley AZ
Employer: Southwest Technologies
Client: Calpine
Job Title: Lead civil / structural QA inspector.
Description of Duties: Construct 520MW base load 530MW peak load gas
fired power plant consisting of Siemens Westinghouse combustion and steam
turbines. Assignments included but were not limited to providing
construction oversight and QA inspections for civil and structural
components throughout including mass excavation and grading, auger cast
piles, conventional spread footings, levies, cooling ponds etc. Monitored
and scheduled soil and concrete testing services.
Coal Power Electric Generating Station
Project: WA Parish, Thompson TX Units 8 and 9 new constructions.
Employer: Houston Consulting Services
Client: Houston Lighting and Power
Job title: Lead civil QC inspector
Located on a 4,650 site acre site near the Brazos River in Fort Bend
Texas (about 27 miles SW of downtown Houston) the WA Parish plant
consists of four natural gas fired units and four coal units. The
3,565,000-kilowatt plant is the largest generator of electricity in the
largest electricity generating system in Texas, and one of the largest in
the country.
Description of Duties: Construct Units 8 and 9, Performed QC inspections
for civil components throughout. Assignments included but were not
limited to installation of rotary car dumper requiring mass excavation
and well points for continuous dewatering, smoke stack foundations and
stacks, numerous subgrade surfaces for railroad and roadbeds requiring
lime stabilization. Pile installations, Installation of lineal stacker,
mass excavation and grading Interfacing directly with HL&P Quality
Assurance and construction management personnel. Monitored and Scheduled
concrete and soil testing services, performed document control
State Highway (Road and Bridge) Construction
Project: SR 125 San Diego CA - $359 Million dollar Design Build Package
Employer: Washington Group Intl / URS San Diego CA
Client: Caltrans
Description of Duties: Construct 31 Typical Bridges including Sweetwater
River Bridge 124'-0 high and OTAY River segmental bridge 190'-0 high.
Place 29,200 cubic meters PCC paving and 320,000 cubic meters MTn AC
paving, excavate10 Million cubic meters, construct retaining walls, noise
barriers and perform major utility relocations. Duties included
construction QC inspection and testing for civil and structural
components, direct interfacing with Parsons Construction Management team
and the State Highway Authority, Caltrans.
Project: Nevada Department of Transportation U.S. 95 from Boulder City NV
to Searchlight State Road 163 from Laughlin NV to US 95 and State road
318 Hiko, NV
Employer: Washington Group Intl -Las Vegas NV
Description of Duties: New road construction consisting of embankment cut
& fills, AC roadbed modifications AC cold mill recycle, AC paving, box
culverts and other supporting structures. Duties included construction QC
inspection and testing oversight for both civil and structural
components, as well as interfacing directly with NDOT Resident Engineer
and staff for scheduling correlation testing and overall acceptance of
work features.
Project: Nevada Department of Transportation Clear Acre Interchange
Overpass.
Employer: Stantech Consulting - Reno NV
Description of Duties: Provided construction QC inspections for civil and
structural components throughout interfacing directly with NDOT Resident
Engineer and staff.
Summary of Field Experience
Safety: Performed daily walk troughs to ensure safe working areas and safe
habits were in place throughout the projects.
Environmental: Performed daily walk troughs to ensure environmental
controls were in place.
Mass Excavations: Monitored excavations for lines, grades and quantities,
performed surveying scheduling registered survey when needed.
Slopes: Have inspected slopes and made necessary adjustments to ensure
stability including benching, shotcrete, retaining walls etc
Pile Inspections: Have performed inspections of bored piles consisting of
friction and end bearing piles, sheet piles for cofferdam construction and
retaining walls, ICP piles, Augeo piles and micro piles. Have performed
blow count, alignment and head pressure inspections. Have performed load
and pull testing.
Blasting: Monitored vibration seismograph readings, ensured all related
explosives permitting was in compliance with ATF, fire marshal and
specification requirements. Performed inspection of overall drilling and
blasting, ensured each blast had adequate stemming and cover. Scheduled
registered blasting consultant when needed.
Sub-grades: Inspect sub-grades for loose or unsound conditions prior to
construction. In road construction have worked extensively with geo-
textiles, lime and fly ash stabilization
Form work: Inspections for lines, grades and adequate shoring.
Reinforcement steel: Inspected concrete reinforcement steel installations
ensuring bar size, lap length, clearance and spacing were in compliance
with approved project plans and specifications.
Concrete: Inspected concrete placements, ensuring the concrete mix, slump,
consolidation and curing were in compliance with approved project plans and
specifications. Have performed as well as have scheduled concrete testing
services.
Mass and cold weather concrete: Have performed thermo-mechanical analysis.
Post tensioned concrete: Have performed as well as have inspected post
tensioning of concrete
Backfill: Inspected backfill operations ensuring the materials and there
placement were in compliance with project plans and specifications. Have
performed as well as have scheduled soil compaction testing services..
Structural steel: Inspect the materials and there installation to ensure
compliance with project plans and specifications have scheduled as well as
have performed torque verification of bolted connections.
Welding: Performed visual inspection of welds for crack identification and
bonding flaws, Scheduled x rays as required.
Piping: Performed hydrostatic testing and inspected HDPE liners.
Fireproofing Inspections: Have obtained samples and verified depths and
adequate coverage of fireproofing agent.
Electrical: Have performed electrical inspections under the direct
supervision of an electrical engineer.
Construction materials testing
experience
Was employed with Alt and Witzig geotechnical engineering Indianapolis
Indiana from 1980 to 1997 the experience gained while employed there has
proven to be invaluable. Having a good understanding of concrete, soil and
steel field and laboratory testing and inspections has been a great asset.
From 1990 to 1997 I set up and managed an office representing ALT and
Witzig near the IU campus gaining management skills that would benefit me
in my future endeavors.
Management experience
Implemented plan and procedure development, performed document control,
reviewed submittals and assisted resident engineers with RFI's, attended
weekly construction safety, progress and QA QC meetings. Have put together
a team and provided direction.
EDUCATION
High School Graduate - 1973
CERTIFICATIONS & TRAINING
Safety trained supervisor - OSHA 10hrs - MSHA Certified
REFERENCES
Steve Summy URS Construction Manager PH: 970-***-****
Jim Hitt former URS Resident Engineer PH: NA
Ron Hill former URS Manger retired Las Vega NV office PH: NA
Gary Wirt former URS Manager retired Las Vegas NV office PH: 702-***-****
Bud Jess former URS Contracts Manager Los Angeles CA. PH: 213-***-****
KD Clark former URS Quality Department Dallas Texas PH: 972-***-****
Jay Simons URS Civil Engineering PH: 702-***-****
Brandon Black URS Structural Engineering PH: 702-***-****
Roger Wirt Nevada Department of Transportation PH: 702-***-****