Engineer Quality
Resume:
EDWIN P. FERRER
Muntinlupa City, Philippines 1771
Email: aced5t@r.postjobfree.com
Contact Number: +63-905-***-****
CAREER OBJECTIVE:
To obtain a challenging position and share knowledge and skills with a new
team, provide excellent service and meet all challenges that are presented
towards the achievement of the company's vision and mission.
QUALIFICATIONS:
Degree Holder: Bachelor of Science in Electronics & Communications
Engineering
Saint Louis University, Baguio City, Philippines
Registered Professional Electronics Engineer
Professional Regulation Commission, Manila, Philippines
JOB SUMMARY:
? Nypro Singapore Pte. Ltd.
QA Engineering Assistant(Incoming, In-process, Outgoing)
May 01, 2009 - December 31, 2013
Reason for leaving: The company closed
? Freelance Professional Practice
April 20,2007-June17, 2008
Maintenance and troubleshoot of electronics and electrical
equipment.
Reason for leaving: To seek overseas employment.
? Polytechnique Manufacturing Inc.
QA Inspector
October 9, 2006 - April 14, 2007
Reason for leaving: Career advancement.
? Semi-Pack Corporation
Quality Assurance Engineer
October 30, 2004-March 17, 2006
Reason for leaving: Seek new career challenge.
? SPI/Semicon Asia, Inc.
QA Inspector
November 16, 2001-September 26, 2004
Reason for leaving: Accepted new career challenge.
? M.G. Ferrer Construction, Inc.
Project Engineer/Supervisor
May 4, 1998-November 13, 2001
Reason for leaving: Accepted new career challenge.
? Maxon Systems (Phils.), Inc.
Research & Development Engineer
January 15, 1997-April 30, 1998
Reason for leaving: Accepted new career challenge.
PROFESSIONAL EXPERIENCE
Nypro Singapore Pte Ltd
May 01, 2009 - December 31, 2013
#06-06, 22 Pioneer Crescent,
Singapore 628556
Nypro has emerged as the recognized leader in the precision injection
molding and contract manufacturing industries, serving Fortune 1000
companies in Healthcare, Electronics, Telecommunications,
Consumer/Industrial, Automotive Industries and Consumer Packaging.
Position: QA Engineering Assistant (Incoming, In-process, Outgoing)
Achievements:
Orange Belt Project: 14N Filter Cap Pad Printing Yield Loss Improvement, to
reduce the percent of rejection and to identify the causes of the reject.
14N Filter Cap (Printed) is the top contributor of the reject in the
Assembly line, the objective of the project is to reduce the reject and
identified what are the causes of the reject. The project had been
identified the five major causes of the high rejection of the 14N Filter
Cap (Printed) and worked to reduce the reject through different corrective
actions. The project has been successfully reduce the reject and for being
the top, the 14N Filter Cap (Printed) is the lowest reject contributor in
the Assembly line.
Responsibilities;
- Report directly to Quality Manager.
- In-charge in overall plant operation on quality issues
- Carry-out training and updates on Quality Plan, Special Instruction
and all other documentation implementation.
- Coordinate with vendor/supplier on quality related issues. Responsible
in issuance of VCAR and its closure.
- Carry-out Incoming Inspection to ensure quality of materials is in
conformance to specifications. Perform In-process inspection
(dimensional and visual) and product Final Inspection as per sampling
plan prior delivery.
- Conduct First Article Inspection and First Piece Inspection.
- Prepares Certificate of Conformance and Outgoing Inspection Report
prior to delivery.
- Monitor and maintain retained samples such as first piece/last shot,
SPC and FAI samples.
- Responsible in monitoring and controlling parts in MRB.
- Responsible in controlling & maintaining CoC, VCAR, NCR and RMA
reports.
- Generates updates and reviews Quality System Specifications and
Quality Plan.
- Supervise packing personnel to ensure product packaging is in
accordance to packaging specs and GMP on packing area.
- Plans and manage QA manpower schedule.
- Review and plans QA personnel skills and improvement.
- Prepare accept and reject samples for QA & Production personnel
concerning quality issue.
- In-charge in monitoring monthly pest control in company premises.
- Conducts training to Operators, Line Leaders, QA Technician and
Process group on quality specifications, updates on quality plan, new
defects encountered on production line and on Good Manufacturing
Practices (GMP).
- Actively participates in module meetings with Manufacturing, Process
Engineering and Maintenance departments to discuss and deal with line
issues and corrective actions.
- Initiates, generates, implements and evaluates corrective actions to
MRB cases, Internal Corrective Action (ICAR) and all Non-Conformance
process or materials by working with the team for the execution of
systematic procedure in problem solving (8 Discipline) to prevent
recurrence of highlighted discrepancies.
- Carry-out Internal Quality Audit
Polytechnique Manufacturing Inc.
October 9, 2006 - April 14, 2007
Makati City, Philippines
A company engaged in manufacturing high quality rigid plastic packaging,
catering mostly pharmaceutical and chemical industries. It utilizes blow
and injection moulding processes.
Position: QA Inspector
Achievements:
Passed the Department of Health (Philippines) company audit.
Responsibilities:
- Perform inspection to ensure quality of product and material are in
Conformance to
specifications.
- Perform planned maintenance & calibration of QA equipment to ensure
and optimize
performance.
- Monitor cycle time and parameter setting of machines.
- Preparation of procedures and work instructions in compliance to ISO
9001:2000 requirements.
- Responsible in manpower planning and monitoring daily job activities
of production operator.
- Ensure good housekeeping and workplace safety in the plant.
Semi-Pack Corporation
October 30, 2004-March 17, 2006
Cavite, Philippines
A certified ISO 9001 : 2000, Filipino owned company engaged in
manufacturing of single extruded PVC tubes and end plug/stopper envisioned
to compliment the packaging needs of semiconductor and electronics
industries. It utilizes extrusion and vacuum forming processes in
manufacturing PVC shipping tubes and end plug/stopper.
Position: Quality Assurance Engineer
Achievements:
Passed the audit of ISO certifying body on ISO 9001:2000 (Quality
Management System).
Attained on time delivery and increase yield percentage by ensuring minimal
waste/reject. Team
leader of the 5'S system of the company.
Responsibilities:
- Controls quality related documents of the company.
- Responsible in conducting Internal/External Audit for ensuring quality
system implementation and
effectiveness.
- Preparation, implementation, controlling and maintenance of work
instructions, procedures and
technical drawings.
- Perform planned maintenance & calibration of QA equipment to ensure
and optimize
performance. Carries-out incoming inspection, in-process inspection
and outgoing inspection.
- Assist purchasing section and interfaces with supplier on quality
related issues.
- Perform annual evaluations on existing suppliers to determine their
QMS are effectively
implemented, maintained and conform to the requirements.
- Responsible in issuing discrepant material report (DMR) to supplier
and follow-up the status until
the issue was closed.
- Assist engineering department in preparing customer sample from
first/sample run until approval
of sample by customer and also during engineering run before
endorsing to production
department.
- Ensure good housekeeping and workplace safety in the plant areas.
SPI/Semicon Asia, Inc.
November 16, 2001-September 26, 2004
Cavite, Philippines
A certified ISO 9001 : 2000, American owned company organized for the
purpose of supplying the packaging requirements of the semiconductor
companies. The company's products are used to protect wafers and devices
from damage during handling, testing and shipping. It utilizes extrusion
and vacuum forming processes in manufacturing PVC shipping tubes and end
plug/stopper.
Position: Quality Assurance Inspector
Achievements:
Internal/External audit team member of the company.
Member of the company's 5'S System.
Responsibilities:
- Perform inspection to ensure quality of product and material.
- Check and monitor parameter setting of machine.
- Preparation of outgoing inspection report and certificate of
conformance for delivery.
- Perform incoming inspection to ensure quality of material are in
conformance to specifications.
- Issuing DMR (Discrepant Material Report) to supplier whenever there is
discrepancy in the
delivered material.
- Issue and follow-up on Corrective Action Report (CAR) to verify its
effectiveness.
- Ensure good housekeeping in the plant areas.
M.G. Ferrer Construction, Inc.
May 4, 1998-November 13, 2001
Rizal, Philippines
Position: Project Engineer/Supervisor
Achievements:
Attained on time completion of project by closely monitoring schedules and
work accomplishment. Attained zero personnel accident and damage to
company and customer properties.
Responsibilities:
- Supervise a staff of competent construction personnel at the job site.
- Perform inspection and qualitycontrol on the job at hand.
- Ensure that manpower, equipment and materials are adequate for the
work.
- Prepare reports of work accomplishment and manpower bills.
- Maintain a log book for thepurpose of recording hours of work, daily
activities and daily
deliveries.
- Check purchased and deliveries of construction material.
Maxon Systems (Phils.), Inc.
January 15, 1997-April 30, 1998
Cavite, Philippines
Position: Research & Development Engineer
Achievements:
Member of the team who develop RF module for cordless phone.
Responsibilities:
- Development of new model of cordless phones.
- Improvement of the existing models of cordless phone.
- Conduct necessary tests such as direct test, radiate test, 3 meter
site test, acoustic test and field
test which are R & D procedures of the company.
- Originate parts list of the newly developed cordless phone.
- Provide technical assistance to the production engineering department
during the pilot
production.
- Analysis and evaluation of new electrical and electronic components
endorsed by different
vendors both local and abroad.
EDUCATIONAL BACKGROUND
TERTIARY ? Saint Louis University; Baguio City, Philippines
Bachelor of Science in Electronics & Communications Engineering
1991-1996
VOCATIONAL ? Baguio Electronics & Technical Institute; Baguio City,
Philippines
Electronics Technician
1989-1991
SECONDARY ? Sacred Heart School; Bauang, La Union, Philippines
1985-1989
PRIMARY ? San Agustin Elementary School; Bauang La Union,
Philippines
1979-1985
SKILLS:
- Knowledge on ISO 9001:2008 Quality Management System, ISO 13845 QMS
for design and
manufacture of medical devices, Internal/External Audit,
Documentation Control, Supplier and Qualification, 5'S, 8D
Methodology, Corrective Action Report(VCAR, NCR), RMA(Returned
Material Authorization), SPC, and 7 QC Tools.
- Proficient on Microsoft Office Applications (Word, Excel & Power
Point), Autocad.
- Knowledge on precision and measuring instruments such as smart
scope, digital caliper, profile
projector, micrometer, particle counter, multitester.
- Knowledge on electrical/electronics schematic diagrams and repair.
TRAINING & SEMINARS ATTENDED
November 23, 2001 Measurement Systems Analysis Training
June 3-6, 2002 Internal/External Auditing Course (ISO 9001:2000)
July 19, 2003 Problem Solving & Decision Making Techniques
July 8 - August 22, 2003 Basic Team Building Workshop
September 13, 2003 The 8D (8 Disciplines Seminar)
PERSONAL DATA
Birthdate November 17, 1972
Birthplace Bauang, La Union, Philippines
Nationality Filipino
Civil Status Married
Height/Weight 5'5" / 170lbs.
Sex Male
CHARACTER REFERENCES
Available upon request.
Contact this candidate