Mitchell Ramey

***** ** ***** **.

Renton, WA ***58

425-***-****

ace5og@r.postjobfree.com

GOAL: To work in a progressive technical field that is challenging and for

a company that strives for excellence in its technology,

processes and the implementation of its ideas.

May 2002- Zetron, Inc. 12034 134th Ct. NE., Redmond WA 98052 (425) 820-

6363

April 2014 Software Tester- 3200 911 Call Center, S330 VOIP 911 Call

Center, Max Call-Taking Next Gen 911 Call Center, IP Fire

Station Alerting. Perform Verification, Validation and

Compliance (ESD, EMI/RFI and Environmental) testing. Experienced

with both Agile, SCRUM and Waterfall SDLC, UI / UX Testing,

Linux, Database Testing. Write and execute Test Plans, Write and

execute Test Cases, Write Test Reports, Root Cause Analysis, Log

Review, Write Application notes, verify manual updates, assist

Tech. Support as needed.

May 2000- Engineering Technician- Provide engineering support on board

and system level testing for a successful designer and manufacturer of

wireless communications

2002 systems, paging systems and data telemetry. Perform

Verification, Validation and Compliance (ESD, EMI/RFI and

Environmental) testing. Prototype assembly and test, soldering,

wire wrapping, circuit breadboarding, test cable assembly,

component evaluation. Document procedures to be used from the

design and testing phase through initial production runs.

Sept. 1988- Paroscientific Inc. 4500 148th Ave. NE., Redmond WA. 98052

425-***-****

Dec. 1998 R+D Lab Technician- Supported physicists and engineers in the

design and test of precision pressure transducers, from initial

concepts to shipping products. Assembled, tested or fixed

whatever deemed necessary: SMT PCB's, fiberoptic cables, test

fixtures, PC's. Inspected production hardware and maintained /

repaired the electron beam welder. Developed assembly and test

procedures while part of the pre-production team prior to

releasing the design to manufacturing. Interacted with vendors

and manufacturers, sourcing parts needed to assemble and test

R+D projects. Maintained and calibrated the electronic test

equipment and production machinery.

Oct. 1986- Anghel Laboratories Inc. 3 Route 46 West, Fairfield NJ 07006

201-***-****

Aug. 1988 Electronics Technician- Assisted in the development of

precision R.F. components and digital control hardware, from the

initial design layout, building and tuning of the prototypes to

delivery to production as a documented product. Was responsible

for adapting computer-assisted test equipment to support

evolving product line. Maintained electronic test equipment and

production machinery.

Aug. 1985- Astrolab 4 Powder Horn Drive, Warren NJ, 07060 201-***-****

Oct. 1986 Microwave Test Technician- Tested and tuned HI-REL microwave

components and connectors using H/P Automatic Network Analyzers

8409C, 8510, 8542C. Developed custom test procedures and built

test fixtures to meet unique customer requirements.

April 1984- Airtron 200 East Hanover Drive, Morris Plains, NJ 07950 (201)

539-5500

Aug. 1985 Senior Electrical Tester- Tested, tuned and repaired E2C fixed

frequency microwave oscillator. Tuned and repaired various test equipment

and microwave components (both active and passive). Cleared Secret,

November 1984

1979-1984 UNITED STATES NAVY: Electronics Technician/Navigational Aides

3326- Trained in the F.B.M. Submarine Navigation Subsystem.

Stationed onboard the USNS Vanguard (TAG-194 Naval Research

Vessel). Cleared Top Secret/Secret Crypto, May 1980

Training: - Microsoft Virtual Academy Applying ALM with Visual Studio

2012 Jump Start 10/11/2013

- Microsoft Virtual Academy Licensing Windows Server 2012

9/25/2013

- Microsoft Virtual Academy Microsoft Licensing Fundamentals

9/24/2013

- Software Tester Training Program Bellevue Community College

Continuing Education Spring 2002

- Software Tester Training 1 Program Bellevue Community College

Continuing Education Spring 2002

- DH Instruments- The Theory, Calibration and Application of

Fundamental Pressure Standards 1997

- National Instruments - Labview Hands-On Basic and Advanced

Course 1996

- Surface Mount Assembly and Inspection, Edmonds Community

College 1994

- High Reliability Solder Training, NASA NHB 5300. Cape

Canaveral, Florida 1982

Zetron is a successful designer and manufacturer of wireless communications

systems, paging systems and data telemetry.

Software Tester at Zetron:

Test systems and products against requirements. Aid in the design and

development of test plans and test cases used to evaluate product

performance and establish benchmarks.

Essential Duties

. Perform assignments of the engineering test function including

requirement analysis, test plan development and test case creation and

execution on complex products and systems

. Aid in establishing criteria for design testability based on requirements

analysis; provide Engineering with suggestions for redesign where needed

. Mentoring of less senior team members on test methodology and technical

aspects

. Establish criteria for the evaluation of test equipment required to

perform quality assurance and test functions.

. Perform long term load, stress, and performance characterization testing;

collect and report data that affords critical analysis.

. Produce written test reports.

. Required to perform the job functions in a safe manner.

Additional duties & responsibilities

. Other duties as required and directed by the Company.

Knowledge, Skills & Abilities

. Ability to understand technical specifications, write test cases based on

design specifications, and execute test cases

. Ability to write test reports and defect reports

. Good trouble shooting skills

. Ability to work both independently and collaboratively on test

assignments

. Strong written and verbal communication skills, with ability to convey

information clearly and accurately

. Advanced knowledge of systems analysis, design, development process and

management

. Ability to relate to, influence and coach team members

. Ability to work effectively in a cross functional team environment

. Good organizational and multi-tasking skills, with the ability to

prioritize, plan work to accomplish goals, and schedule tasks to meet

deadlines

. Strong analytical skills with accuracy and attention to detail

. Ability to adapt and respond positively and effectively to change, delay,

and/or shifting priorities and goals

. Have a high degree of self-motivation and initiative

. Ability to develop and maintain strong process documentation

Engineering Technician

Responsibilities:

-Provide engineering support on board and system level testing.

-Building and testing of prototypes.

-Verification, Validation and Compliance (ESD, EMI/RFI and Environmental)

testing.

-Prepare recommendations for testing and documentation of procedures to be

used from the design and test phase through initial production run.

-Troubleshoot HW/SW.

-Perform complex assignments of the engineering test function for standard

and/or custom devices.

-Perform board and system level testing, product reworks, Prototyping:

soldering, wire wrapping, circuit breadboarding, rework, test cable

assembly and troubleshooting.

-Provide engineering support in building prototypes and aiding in the

testing of prototypes.

-Perform long term environmental and electrical stress testing while

maintaining traceable data to - substantiate performance criteria.

-Aid in problem confirmation by developing tests that resemble a customers

environment.

-Assist in the implementation and support of ISO 9001.

-Writing procedures for engineering and production use.

-Problem confirmation and resolution.

-Perform moderately complex assignments of the engineering test function

for standard an or custom devices.

Requirements:

-Business math and communication skill as required with a 2 year degree.

-3 years experience in a high tech environment with 1 year experience in an

engineering environment.

-Proficient with standard test equipment. Such as oscilloscopes, signal

generators, meters, power supplies etc. Labview and Visual Test a plus.

-RF (LTR) and PC S/W and H/W experience a plus.

Provide engineering support on board and system level testing for a

successful designer and manufacturer of wireless communications systems,

paging systems and data telemetry. Aid in problem confirmation by

developing tests that resemble a customer's environment. Perform

Verification, Validation and Compliance (ESD, EMI/RFI and Environmental)

testing. Perform long term environmental and electrical stress testing

while maintaining traceable data to substantiate performance criteria.

Building and testing of prototypes. Soldering, wire wrapping, circuit

breadboarding, product rework, test cable assembly, troubleshoot HW/SW,

reconfigure PC's, component evaluation. Document procedures to be used from

the design and test phase through initial production runs.

Perform complex assignments of the engineering test function for standard

and/or custom devices. Provide engineering support on board and system

level testing. Verification, Validation and Compliance testing.

Troubleshoot HW/SW. Provide engineering support in building prototypes and

aiding in the testing of prototypes.

Perform long term environmental and electrical stress testing while

maintaining traceable data to substantiate performance criteria.

Aid in problem confirmation by developing tests that resemble a customer's

environment.

Contact this candidate