Sr. Instrumentation/Operator
Resume:
Ramon S. Pendon
# *** *. ****** **. ******, Pililla, Rizal
acdvc6@r.postjobfree.com
Position Desired: Sr. Instrumentation / Operator
OBJECTIVE
To attain a challenging and responsible career position in the established Organization where I can contribute the best of my knowledge and effort for my career advancement and for the organization and be a part of the team that excels in works towards the growth and success of the organization in the company.
SUMMARY OF EXPERIENCE
Having 5 years in work in Philippines, 9 years experience in Oil and Gas companies in their Field and DCS-Panel/Field Operation with plant Start-up, Shutdown, Pre-commissioning, Commissioning and HSE activities.
EDUCATION
MERALCO FOUNDATION INSTITUTE (Nov. 1-18, 2010)
Trainning Course: Instrument Calibration
Chino Roses Avenue, Ortigas City
DON BOSCO TECHNICAL INSTITUTE (1998 ? 2000)
Course: Instrumentation & Control
Chino Roses Avenue, Makati City
MALAYA NATIONAL HIGH SCHOOL (1994 ? 1998)
Malaya, Pililla, Rizal
NIOGAN ELEMENTARY SCHOOL (1989 ? 1994)
Niogan, Pililla, Rizal
WORK EXPERIENCE / RESPONSIBILITIES
HYUNDAI HEAVY INDUSTRIES
Dec 3, 2012 ? Dec. 4, 2013
DAS ISLAND, Abudhabi, UAE, OFFSHORE
Company Industry: Oil / Gas / Petroleum
Plant Operator
? Ensure and must be check all the safety standard procedures and guidelines as per Commissioning Safety manual, ( PTW, PPE, HAZOP, SAFETY BARIERS, SAFETY EQUIPENT, ACCESS,) ETC.., to assure a safe start-up for us, equipment and environment.
? As Field Operator - Monitoring on shift in the assigned operating area, the operation of processing plant and all equipment and ongoing maintenance work. It includes regular inspection of operations (field tours), adjustment of a variety of valves and switches, maintaining all equipment in synchronization and taking and analysing log readings from a variety of gauges and indicators. Reports any anomalies noted to his Supervisor and/or to the Operator in control room duty.
? Responsible in implementing Commissioning and Startup of all process instruments and system line-up within Dehydration is a process of water removal from the drying by substances which is called glycol solution also the system of Fuel Gas Treating, H2s removal by MDEA solution.
? Operates and maintains various equipment associated with used oil refining, including pumps, heaters, burners, vacuum system, centrifuge, automation equipment/instruments, control valves, Steam Boilers, Process heaters, etc.
? Perform troubleshooting and repairs on mechanical equipment, pipe fittings, minor line leaks, pumps, valves as Necessary.
? Operates Human-Machine Interface (HMI) at Control Room
? Monitors the operation of plant equipment and systems constantly, to minimize unplanned downtime, solve problems in a timely manner, and to identify opportunities for improvement
? Gathers and reports refinery process parameters through regular checking of process instruments/gauges and visual checking/gauging of process tanks
? Evaluates daily production estimates to identify production shortfalls that may be related to equipment problems, leaks or spills, or changing of process parameters
? Involvement in planning and executing various plant maintenance shutdown activities if required.
? Adhere to and enforce all applicable company safety, health, and environmental policies and procedures
? Implements programs and procedures required to ensure plant cleanliness.
? Implement and Maintain spare parts and preventative maintenance programs and associated Maintenance software.
? Participates in HAZOP analysis.
? Start-up/ Shutdown Operation and Commissioning for Fuel Gas Treating Package
? Start-up/ Shutdown Operation and Commissioning for Gas Dehydration Unit
? Start-up/ Shutdown Operation and Commissioning for Gas Compression System
? Start-up/ Shutdown Operation and Commissioning for Separation System
Pig Receiver, Inlet Filter Separator, Slug Catcher, Gas Scrubber
? Start-up Operation and Commissioning for Flare System
High Pressure and Low Pressure Flare System
? Start-up Operation and Commissioning for Common Facilities / Utilities
Compressed Air System (instrument and Utility Air)
Nitrogen
Utility and Portable Water
Low/High Pressure Steam
Drain and Sewers system
Fire And Gas system
Emergency Diesel Generator
Deluge System
Inergen System
? Experience in Honeywell Experion System
? Experience in computerized maintenance management system
? Simultaneous Operation coordination to the client (ADGAS).
? Ensure all procedure is follow based on Manual and specification.
? Function Test of ESD, DPS, and HIPPS Valve base on Cause & Effect Chart.
? Verify all lines through UFD, BFD, PFD and P&ID.
DAEWOO E & C
October 15, 2010 ? March 15, 2012
GNL-3Z Project, Arzew Algeria, Africa
Company Industry: Oil / Gas / Petroleum
Field Operator
Responsible for general field operations.
Maintain day to day safe operation and update field operation procedure.
Perform daily / weekly routine activities and handover.
Maintain corrosion inhibitor program.
Manpower arrangements, assure integrity of well sites, (fence, gate, etc.,)
Controlling of sampling system.
Maintaining registration documents for PTW.
Responsible for design isolation and LOTO procedures.
Support for plant operation and other teams coordinate with operators to have better control for well shut-in.
Assure correct valves line-up and assist operations on plant troubleshooting.
Function Test of ESD, DPS, and HIPPS Valve base on Cause & Effect Chart.
Verify all lines through PFD, BFD, UFD and P&ID.
Maintains records and communication as required by district manager.
CEGELEC
Seconded to Single Buoy Mouring Inc. (SBM)
MOPUSTOR- YME FIELD REDEVELOPMENT
September 5, 2009 ? September 28, 2010
ADYARD, LIWA 1, Mussaffah, Abu Dhabi, UAE
Company Industry: Oil / Gas / Petroleum
Commissioning Field Operator
Ensure that before proceed to our work must be check all the safety standard procedures and guidelines as per Commissioning Safety manual, ( PTW, PPE, SAFETY BARIERS, SAFETY EQUIPENT, ACCESS,) ETC.., to assure a safe start-up for us,equipment and environment.
Check and Verify the system which is priority in Commissioning / Start up step by step procedure.
Carry out Isolations/De-isolations both Instrument and Mechanical work.
Provide a Technical assistance and support during start-up, steady operation and process shutdown.
Functional testing of instrument and pre-commissioning and commissioning works.
Inspection and confirmation of instrument loop line as per loop diagram and inspection of instrument location as per the latest revision drawing
DAESUN ELECTRIC AND COMMUNICATION CO.,LTD
August 02, 2008 ? August 30, 2009
Sohar, Port OMAN
Company Industry: Oil / Gas / Petroleum
Instrument Commissioning
Simulation, calibration, cause & effect and checking up configuration of all different types of instruments link in the control room console with the SIEMENS Distribution Control system (DCS) Plant emergency shutdown (PESD) Machine Monitoring System (MMS) by Bentley Nevada.
Maintain the operation of the instrument of its optimum performance participate in planning & implementation of all system modification maintaining the life of instrument device by instrument maintaining such as a predictive, preventive and corrective maintenance.
Responsible in Calibration of Field Instruments Trouble-shooting and Repair of all Instruments in the Plant.
Inspection and confirmation of instrument loop line as per loop diagram and inspection of instrument location as per the latest revision drawing
Assign in Calibration and troubleshooting of all motor and instrument in heating medium area and diesel engine area.
We verify that the instrument meets the required specification as per data sheet, instrument loop diagram and P&ID we also checking the 5 points reading alarm set point signal fail and server mismatch of transmitter,Control valve, On-off valve, Blow down Valve and emergency shutdown valve and set up, air requirement as per name plate and data sheet simulation troubleshooting.
ISAM KABBANI AND PARTNERS CO., LTD (SAUDI ARAMCO)
April 23, 2005 ? June 7, 2008
P.O.box 6897 dammam, 31452, K.S.A
Company Industry: Maintenance / Oil & Gas Company
Maintenance Instrument Technician
Direct the work of electricians and instrument technician and other personnel in his area of responsibility.
Performs and/ or directs maintenance on electric, pneumatic and electronic instrument and Control system.
Diagnoses problems or potential problems in control system pneumatic, and electrical and DCS related.
Performs preventive maintenance on electrical and instrument control system and protective switches.
Requisition instrument and electrical maintenance supplies tools and test equipment.
Coordinates instrument repair and test work.
Compiles daily activity reports and inputs to instrument planning function.
Reports the event and the activities to the concerned supervisor in terms of manpower / spares utilized.
Attend to call outs after normal working hours.
Plans and supervises daily Workload in his area. Inspect repairs, test the electrical equipment and protection system and makes final running adjustment.
Have skills to disassemble and reassemble machinery in accordance with specification (such as, but not limited to panels, pumps, level gauges,flow indicators,pressure and temperature indicators and fire alarms equipment.)
Comply safety measures / precautions at all times.
Pre-commissioning for both Electrical and Instrument.
Loop-checking & Simulation testing.
Insulation testing of supply cables, resistively testing.
TOKYO BOSAI SETSUBI CO.,LTD (PHILS.)
April 2, 2003 ? April 15, 2005
# 6 Rosal St. Saint Dominic III Subdivisions, cor. Mindanao Avenue, Banlat, Q.C.
Assigned at Tarlac and Quezon Power Plant as Operation Staff.(detection and suppression system).
Company Industry: Maintenance & Construction
Instrument Foreman (Power Plant)
As per data sheet, instrument loop diagram and P&ID we also checking the 5 points reading alarm set point signal fail and server mismatch of transmitter,Control valve, On-off valve, Blow down Valve and emergency shutdown valve and set up, air requirement as per name plate and data sheet simulation troubleshooting.
Maintain the operation of the instrument of its optimum performance participate in planning & implementation of all system modification maintaining the life of instrument device by instrument maintaining such as a predictive, preventive and corrective maintenance.
Troubleshooting, repair, Installed and maintenance of fire alarm system in commercial
Building, power plant, particularly in Covanta and Tarlac power plant w/c type is conventional and addressable Fire alarm control panel.
Attend to call outs after normal working hours.
MASIPAG MANPOWER AGENCY INCORPORATED
March 10, 2002 ? March 30, 2003
# 1958 C.M. Recto Avenue, M.M.
Assigned at Metropolitan Hospital, Sta. Cruz, Manila
Company Industry: Maintenance
Maintenance Foreman
Experience in troubleshooting, repair, and maintenance of Circuit Breakers, Generator, motors, like, submersible pump, Booster pump, Etc.
Experience in maintenance of medium/large gensets, switchgears (low and medium voltage) Transformers, cable terminators,(automatic transfer switch).
VOLTAGE ELECTRICAL CONTRACTOR CORPORATION
March 2, 2001 ? March 10, 2002
# 5 Saint Catherine St. Perpetual Village, Taguig, Metro Manila
Instrument Foreman
To handle the manpower Timesheet and work assignment as per area.
Experience in team leadership and supervising.
AUTOVEYOR PHILIPPINES CORPORATION
June 29, 2000 ? July 21, 2001
Brgy. Tunasan, Muntinlupa City,Philippines
Instrument Technician
Experience in troubleshooting, repair, and maintenance of conveyor
Attend to call outs after normal working hours
TEST/REFERENCE INSTRUMENT HANDLED
Emerson Process Management 475/375 HART Field Communicator *Digital Multi-meter, * DC Power Supply, * Current/ millivolt signal generator, *Dead Weight Tester with Precision Weights, * Pressure Calibrator/ Vacuum Generator, * Certified Pressure Gauge or Differential Pressure Indicator, * Loop Calibrator/Simulator * Certified Glass Thermometer, *Temperature Bath or Temperature Calibrator, * Hydraulic or Pneumatic Hand Pump/Pneumatic Calibrator, *Standard Resistance Box, *250 Ohms Loop Resistance, *Safety Valve Calibration Bench, Reference Pressure Gauges, and Soap Leakage Test Spray, * Standard gas test cylinder, * Standard Sample Solution.
FIELD INSTRUMENT HANDLED
Rosemount Vortex Flow meter model 8800 * ENDERS + HAUSER (Promag 50) Magnetic Flow meter * YOKOGAWA EJA-1100A Diff. Pressure type Flow meter * YOKOGAWA EJA-430 Pressure Transmitter *FISHER Field Vie instruments (DVC 600) Digital Valve Controller I/P transmitter Diff. Press, Type * ENDERS + HAUSER (Prosinic M) Doppler Ultrasonic Level Transmitter * ROSEMOUNT 8705Flow Tube magnetic flow meter *Oval flow meter * SAMSON Digital Control Valve type 3277 Actuator * HONEYWELL UDC3300 Universal input / controller * SHIMADEN SR Series Temperature controllers * SHIMADEN SD 16 Indicators * YOKOGAWA Indicators * EE Temperature and humidity Transmitters CARLO GAVASSI Level Relay Switch * OMRON E% Series Controllers * CAL 5500 Temperatures Controllers * HORNEL Speed Indicators * Fuji Temperature Controllers * HONEYWELL True line Thermograph * ABB P/I Converter * ROSEMOUNT I/P Converter * Pressure Gauge * Temperature Gauges
FIELD HANDLING EQUIPMENT
Compressors, Condensers, Coolers, Exchangers, Pumps, Boilers, etc..,
SEMINARS ATTENDED
HOT WORK SAFETY
Sohar Aromatics Project
March 18, 2009
KIDDE WET CHEMICAL TECHNICAL TRAINING
Saudi Aramco, Dhahran, KSA
March 27, 2007
YOUTH ENCOUNTER
St. John Bosco Parish
Fr. Edwin Solvia, SDB (youth in charge)
May 19-21, 2000
AWARDS RECEIVED
PERPECT ATTENDANCE AWARD
Hosted by: Pilipinas Shell Foundation, Inc
And Don Bosco Technical Institute, Makati
November 26, 2000
SPECIAL SKILLS
Electromechanical Technician
Process Technician, OIL & GAS
Knowledgeable of PC Operation ( Windows Microsoft office and various software?s )
Computer Technician (Basic)
DRIVER ( Philippine & Gcc License )
PERSONAL DATA
Place of Birth : Niogan,Pililla,Rizal
Civil Status : Married
Sex : Male
Height : 5?4
Weight : 130 lbs (60 kg)
CHARACTER REFERENCES
Engr. Moises (June) Valiente Project Manager
Isam Kabbani, Abqaiq Project
KSA
Engr. Darwil Tirados Process Engineer
CAMERON
Kingdom of UAE
Ver Vindoy Instrumentation Engr.
ADGAS,Das Island
Kingdom of UAE
REMARKS
I hereby certify that the information aforementioned above are true and correct to the best of my knowledge in actual experiences, and I will give and do the best of my work.
RAMON S. PENDON
Contact this candidate