RAMIRO GUERRERO
acd36e@r.postjobfree.com
Career Objectives
To find employment within a company that can benefit from my experience and dedication
to service. Eager to learn, a steady career, and to progress my skills and knowledge in
any occupational field .
Summary of Qualifications
Good communication and writing skills, self-starter, highly motivated individual, eager to
learn, reliable, dependable and trustworthy. Good leadership and organizational skills,
team player, gets job done with minimal to no supervision required.
Work History
January 2014-Present CCC Group- Texas
Pipefitter/boilermaker helper
Supervisor- Sergio Rodriguez 361-***-****
• Duties include making sure all tools are in order and are ready for the job on site.
• Responsible for hydro testing, flushing, and restoring pipelines and valves in the
plant.
• Making sure job area is clear of any hazards and organized for an efficient work
day.
• Need very little to no supervision when given a direct job to accomplish.
• Can operate man lift, forklift, and scissor lift very well.
• Keep inventory of all tools checked out tool room and prepare them for the job at
hand.
• Make sure job site is clean and well-kept at the end of the day.
• Possess a twik card and a safety badge.
October2012- January 2014
Midway Energy Services- Texas
Roustabout Pusher
Supervisor- Rudy Silvas 936-***-****
• Roustabout duties include piping in tank batteries, heaters, and high/low
pressure separators for storage of cleansed oil coming directly from oil well.
• Pipefitting (threated pipe) entire tank battery from ground up.
• Efficient on man lift, forklift, bobcat with auger and bucket and sufficient with
backhoe.
• Take inventory of what we need for each job and stay proactive on inventory for
jobs scheduled in future.
• Operating forklift is also a responsibility to making sure no one is in danger and
material is moved properly.
• Responsible for all crew members are safe and use proper safety precautions
July2011-August2012 such as wearing proper ppe and using harnesses and flagging when
TL Electric,Mechanical,Plumbing- Texas
Plumbers Apprentice
Supervisor- Ruben Lescano 713-***-****
• Assemble, installing, repair and maintaining pipes, fixtures and other plumbing
used for water distribution and waste water disposal in commercial and
residential buildings.
• Read schematics and tech data to determine the job at hand.
• Use hand tools and power tools .
February2010 - July2011
• Efficient in soldering, silver soldering, and the assembly of all plastic pipes..
United States Air Force - Texas
Water and Fuel Systems Maintenance
• Assemble and maintain, inspect, and repair natural gas, swimming pools,
plumbing, water and wastewater treatment systems, fire suppression, and
backflow prevention assembly.
• Troubleshoot and inspect, recurring maintenance, winterize, and overhaul
systems. Operationally inspect and diagnose malfunctions in mechanical and
electrical system controls
• Inspect condition and operation of electrical components such as motors;
disassemble switches, contacts, solenoids, relays, alarms, cathodic protection
systems and programmable logic controls.
• Test fuel system components, and perform pressure testing and maintenance on
fuel system piping. Perform confined space entries to accomplish system
maintenance.
• Solve complex maintenance problems by studying layout drawings, wiring
diagrams, and schematics to analyze, isolate and troubleshoot system
malfunctions. Disassemble, repair, and replace defective components. Install,
modify, repair, and maintain a variety of new and existing utility, supply, and
disposal systems according with rules and regulations for waste material; and
equipment such as sewage, water, oil, and gas distribution systems, and water
closets, tubs, backflow prevention devices/assemblies, fire sprinkler systems,
and showers. Locate and tap main lines, set up system routes, place and cut
route openings, place hangers for proper level and slope, and determine and
install valves, traps, and unions as needed for proper operation of a variety of
systems and equipment.
• Develop and establish operation and maintenance procedures to ensure
maximum efficiency. Locate and determine quality and quantity of water sources.
Coordinate locations of field latrines and pits with engineering and medical staff.
Analyze water for chemical and physical characteristics to determine water
purification treatment methods.
March2009 - February2010 National Metering Services - Corpus Christi, Texas
Meter Installer
• Install water meters in consumer establishments, using hand tools and power
tools. Turn mainline valve to close water flow through line. Disconnect water pipe
and connect water meter to outlet and inlet pipe unions, using wrench. Examine
pipes to detect leaks and informs consumer to close faucets. Open mainline
valve to admit water flow into building. Records meter readings [Meter Reader
(utilities; waterworks)].
• Install and repair water system pipes and accessories
• Trained and certified for replacing gas meters
February2008 - March2009 Repcon - Corpus Christi, Texas
Welders Helper/Toolman/Pipefitter
• Measure and elevate pipe needed to do projects. Help level pipe and rework
them on clever hangers. Bevel pipes for welders.
• Performed stainless steel welding as well as worked with different angles of pipe
fittings and flanges.
• Perform welder helper duties using electric, oxyacetylene, MIG and TIG welding
processes.
• Use schematics, sketches, and tech data; develop templates, jigs, and dies to
repair, modify or fabricate metal items for all types of electronic and structural
equipment.
• Make a wide range of welds from simple to precision welding; determines
disassembly or repair necessary and materials to be used.
• Work processes include pre-heating, brazing, bead welding, tack welding, flame
cutting, pressure welding, and heat treating; selection of type of rod and/or size
of tip to accomplish weld, determining heat necessary, setting up and adjusting
equipment, maintaining proper speed, flame, motion, tip angle and position to
produce desired results.
• Organized and inventoried tool trailers for rentals for refineries. Maintained
proper tool function for all tools.
Education
Aug 2004 - Aug 2007 Richard King High School - Corpus Christi, Texas
Education Level: High School Diploma/GED
GPA: 3.5
Training
Mar 14, 2010 - Aug 18, 2010 The United States Air Force
J8ABR3E431 00AC Water and Fuels System Maintenance
PDS CODE USI-688 Hours
Status: Completed
Occupational License or Certification
Kenneth W. Backes, Colonel, USAF - Wichita Falls, Texas
Water and Fuels System Maintenance Apprentice
Certification
Issued: Aug 18, 2010
TWIC card
Safety badge with basic plus-CSCCB ID#140800
Occupational Experience
Pipelayers (1 yr. 5 mos.)
Helper - Pipelayers, Plumbers, Pipefitters, and Steamfitters (2 years)
Drilling & Boring Machine Tool Setters, Operators, Tenders, Metal & Plastic (1 y
Computer Skills
Typing Speed: 60 Words Per Minute
Data Entry Terminal (PDT, Mainframe Terminal)
EMail Software (Outlook, Thunderbird)
Internet Browser (Internet Explorer, Firefox)
Peripheral Devices (Scanners, Printers)
Personal Computers
Spreadsheet Software (Calc, Excel)
Utility Software (Virus, File Compression)
Language Skills
English - Excellent ( Read Write Speak)
Spanish - Fair ( Read Speak)
Driver's License
Class C - Standard Driver's License
References
Jason Cardero
Supervisor
U.S. Airforce
Fred Hogan
Co Worker
National Metering Services
Alex DelaGarza
Supervisor
National Metering Services