Andrew Davidson
Address: ** ******** ******* ********** ** 6233
Telephone: (08) 9725 9750 Mobile: 040*-***-***
PROFESSIONAL PROFILE
. Fully Qualified Certificate III in Engineering - Fabrication Heavy Duty
(YG) (MEM30305)
. Experience in Heavy Duty Fabrication and Welding
. Experience in Working on Stackers, Reclaimers, Conveyors, Ship Loaders
. Manufacturing False works and Modifying existing structures to meet
specification
. Experience in Sheet Metal Fabrication
. TIG, MIG, MMA & Flux core (Inner shield) Welding, Oxy Cutting &
gauging, Air Arc gauging, Brazing & Silver Soldering
. Able to pass 2G, 3G and 4G weld tests using MMA and Flux core
procedures
. Experience in reading and working from Engineered drawings
. Tig welding high pressure aluminium, Steel Oil Coolers, Radiators and
various types of heat exchanges.
. Completed a CAD Drawing Course at TAFE
EDUCATION, TRAINING AND TICKETS/INDUCTIONS
2013 RIO Tinto HSE Induction
Valid Until: 21/12/2015
RIO Tinto Isolation & Lock holders Inducted
Valid Until: 16/07/2014
Enter & Work In Confined Spaces
Attained: 18/12/2013
Current MSIC Card
Valid Until 22/08/2015
Work Safely at Heights (GAP)
Attained: 07/02/2013 (Saferight Training Academy)
Mine Employees Health Surveillance Card (395182)
Valid Until 15/01/2015
2011 SWRC TAFE Certificate III in Engineering - Fabrication Heavy Duty
2010 Licence to Perform High Risk Work
Valid Until 22/01/2015
2009 HR Truck Licence (and have A Class Drivers Licence)
Keen Brothers Truck Driver Training.
Aveling Online Coarse
WA Construction Blue Card No. 285418
2008 SWRC TAFE
Completed CAD drawing course
EMPLOYMENT HISTORY
February 2012 - October 2013 JOHN HOLLAND (CAPE LAMBERT KARRATHA)
Position: Boilermaker/Welder
Responsibilities and Duties:
. Worked as Boilermaker/Welder at the Cape Lambert Port B Project
performing wide range of heavy duty fabrication and welding. Worked on
Construction of the Cape Lambert Port B facility. Manufacturing and
modifying Falseworks. Installing modules and welding them into place.
Passed biannual 3G & 4G weld tests using Innershield & MMA welding
procedures
February 2010 - February 2012 JOHN HOLLAND WORSLEY (COLLIE)
Position: Boilermaker/Welder
Responsibilities and Duties:
. Worked as Boilermaker/Welder at the Worsley Alumina Refinery performing
wide range of heavy duty fabrication & welding. Working on the Worsley
Alumina Expansion. Construction of 2 Stackers. Shut downs on existing
Reclaimers. Changing out & replacing existing Overland Conveyor
transfer point chute & drivewheels in drivehouse. Construction of
Calciner, installing large vessels & associated pipes running from
them. Passed biannual 3G & 4G weld tests
September 2009 - February 2010 ELITE STAINLESS STEEL FABRICATION
(BUNBURY)
Position: Welder/Fabricator
Responsibilities and Duties:
. Wide range of general fabrication including manufacturing fuel tanks,
stainless steel and aluminium balustrades, stainless steel BBQs.
Installing most of the work that I manufactured such as Commercial
range hoods for IGA, stainless steel edging and window framing for
McDonalds, Stainless steel and aluminium balustrades for prestige
residential homes, shopping complexes, Doctor Surgeries etc
February 2009 - May 2009 MARINDI FABRICATION (BUNBURY)
Position: 2nd Class Welder
Responsibilities and Duties:
. Wide range of general fabrication including boat hulls, canopies, hand
rails, trailers and fuel tanks. Manufacturing stainless steel and
aluminium balustrades. Installing most of the work that I manufactured
such as Stainless steel and aluminium balustrades for prestige
residential homes, shopping complexes, Doctor Surgeries etc
April 2008 - February 2009 SOUTH WEST FENCING (BUNBURY)
Position: 2nd Class Welder
Responsibilities and Duties:
. Manufacturing aluminium & stainless steel balustrades. Specialising in
Aluminium & stainless steel TIG welding. Manufacturing structural steel
staircase support, aluminium gates, louver panels & installation
June 2007 - April 2008 LOCKSAFE INDUSTRIAL SAFETY EQUIP (PERTH)
Position: Trades Assistant/Welder
Responsibilities and Duties:
. Production assembly of technical safety products & Input with the
design and manufacturing ideas. TIG welding, pre cut stainless steel
pieces to make safety isolation switches for a wide range or mining and
construction equipment ie EWP, cranes, forklifts and light vehicles
February 2003 - June 2007 COR ENGINEERING COOLING (PERTH)
Position: Supervisor leading hand
Responsibilities and Duties:
. Running & supervising the diversified products section, Reading &
working from drawings. TIG & MIG welding, high pressure oil coolers
radiators and various other types of heat exchanges. Knowledge of
threads and fittings commonly used in the mining and industrial field
PERSONAL ATTRIBUTES
. Efficient
. Energetic
. Hard Working
. Enthusiastic
. Reliable
. Confident
. Self motivated
. Organised
. Excellent communication
. Cooperative
. Committed
. Take great pride in my work
HOBBIES AND INTERESTS
. Motorsport
. Football
. Golf
. Wood work
. Restoring old cars
. Tennis
. Bike Riding
. Spending time with family
REFEREES
Andrew Paintin
Supervisor - John Holland Group - Cape Lambert Port B Project
Mobile: 042*-***-***
Mick Hagen
Supervisor - John Holland Group - Cape Lambert Port B Project
Mobile: 041*-***-***
Matt Sofield
Supervisor - John Holland Group - Worsley Expansion Project
Mobile: 042*-***-***
Peter Menegola
Owner Director - Marindi Fabrications
Telephone: (08) 9725 4116
Mark Scasserra
Owner/Director - Elite Stainless Steel Fabrication
Mobile: 043*-***-***
David Prouse
NATRAD
Mobile: 043*-***-***
Rob Hodgson
Director - South West Fencing & Balustrades
Mobile: 043*-***-***
Nigel Harrison
Director - Locksafe Industrial Safety Equipment
Mobile: 041*-***-***