ANGELO CARUSO
Islandia, N.Y. 11749
Home: 631-***-****
Cell: 631-***-****
acc95s@r.postjobfree.com
acc95s@r.postjobfree.com
Summary of qualification: Able to generate complex 3Dmodels and 2D
drawings; interpret and ensure conformance to applicable standards, codes
and policies including ASME Y14.5M; document designs through detailed
drawings using GD&T; work with engineering fundamentals and handbook
formulas, machine shop practices; working on vacuum systems,
instrumentations, and drive components; Computer proficiency in all
Autodesk products, expert abilities with Autodesk Inventor Pro 2013 with
Vault and autocad Mechanical 2013.
Experience:
BROOKHAVEN NATIONAL LABORATORY. Upton, N.Y.
July 2013 to
Jan 2014
Term Employee Sr. Mechanical Designer for (NSLS II)
Designing for Engineers beam line ray tracings in Autocad and creating
detailed parts and creating top assembly drawings using inventor 2013.
Drawings stored in Vault checked in and checked out for revising. Eco's
were created from work orders then processed through Vault.
Provided design and documentation support for NSLS-II accelerator
supplemental radiation shielding effort.
Created drawing packages for lead, steel and concrete shields to be placed
at critical locations in the accelerator for personal and equipment
protection purposes. Supplemental shielding effort was completed in time
for the Accelerator Readiness Review (ARR).
Adaptive Manufacturing Technologies, Ronkonkoma N.Y.
March 2013 to July
2013
Assist in designing with Engineers new Heat Dies for custom pouches.
Custom made units for customers or purchased as a standard machine.
Drawings were created in AutoCad and using inventor 2012. Detailed parts
and created assemblies, electrical schematics, wiring diagrams and some
sheet metal Design. Reverse engineering document Hand drawings redrawn then
converted in inventor for manufacturing to detail parts and create complete
assembly drawings in house to be assembled.
BROOKHAVEN NATIONAL LABORATORY. Upton, N.Y.
Aug 2009 to
Dec 2012
(Contractor) Senior Mechanical Designer for (NSLS II)
Assist in designing with Engineers new products and making improvements to
current products utilizing Inventor Pro 2013 Auto-Cad Mechanical and
Vault. For the Electrical department Created detailed assembly drawings in
the storage ring of NSLS-II with electrical wiring, plumbing and placing
large group racks with cable trays in the ring. Create documentation
release packages incorporating Engineering change orders (ECO's). Interface
with outside vendor's component and process design. Interface with R & D,
workgroups, machine shop, production and assisting Engineers in mechanical
design. For Diagnostics I supported the Engineers in detailing and design
for the Safety Shutter, Energy Slit and the complete Synchrotron Light
Monitor System (SLM) from start to finish.
MISONIX, INC.
FARMINGDALE, N.Y.
Dec 2003 to Aug 2009
SENIOR MECHANICAL DESIGNER Cad coordinator experience and Eco controller.
Created detailed drawings of medical devices consisted of Bezels, cutter's,
blade's, Bone cutters and hand pieces. Light Sheetmetal design for
Packaging electronic components, Detail drawing's, with complete Assembly
drawing's. Creating and standardizing Library parts using Inventor 2009 and
Mechanical Desktop.
(Sheet Metal Co.) LAB-CRAFTERS, INC
RONKONKOMA, N.Y.
Aug 2003 to Nov 2003
MECHANICAL DESIGNER Created from hand sketches sheet metal
detailed parts & converting into 3D modeling for final Assemblies with
hands on experience. Each part consists of Bend deduction, Bend allowance,
from a Blank size, to create flat patterns for the N/C programmer.
MISONIX, INC.
FARMINGDALE, N.Y.
June 1999 to July 2003
SENIOR MECHANICAL DESIGNER Modeling 3D Assembly drawings
creating solid modeling of fabrication drawings and installation drawings.
Drawings consist of detailed tanks, skids, packed columns, Venturi's,
plumbing & riser diagrams. Detailed fabricated parts are all table driven
in Excel format using Mechanical Desktop 5/AutoCad 2000.
VEECO INSTRUMENTS, INC.
April 1995 to June 1999
PLAINVIEW, N.Y.
MECHANICAL DESIGNER Drafted and detailed parts and created assembly
drawings for process chamber module. Consisted of vacuum system (plumbing),
Sheetmetal with packaging utilizing software 3D modeling in SDRC and create
2d sketch's with Auto-Cad Release 14.
TASCO ELECTRONICS. INC.
January 1995 to
April 1995
PLAINVIEW, N.Y.
(Contractor) MECHANICAL DESIGNER). Draft and assisted in design packaging
electronic chassis and front panels for commercial aviation test equipment
by using AutoCAD release 13 software.
FREDERIC R. HARRIS, INC
July 1993 to
January 1995
NEW YORK, N.Y.
MECHANICAL DESIGNER. Cad operator Drafted and detailed for all departments
consisted of Architectural, Mechanical,
Civil and Electrical construction and renovation projects using AUTO-CAD
R12.
GRUMMAN AEROSPACE CORP.
March 1985 to January
1993
BETHPAGE, N.Y. MECHANICAL DESIGNER: Produced full size cockpit mockups in
the design aid lab of most of Grumman Aircraft's consisted of controls,
displays wiring cables packaging electrical units prior to production
utilizing CADAM/CATIA for designing, fabrication and modification of
aircraft component parts s with packaging electronic equipment for the F-
14D Tomcat and the Advanced Future Tomcat 21 fighter jet.
Education:
BROOKHAVEN NATIONAL LABORATORY TRAINING COURSES:
June 2009 to Jan 2014
GE-100 Information Security Awareness Qualified
GE-12A Static Field Medical Surveillance Qualified
GE-42 Computing Positions
GE-53E BNL Employee Requirements
GE-68A LOTO Affected Worker
GE-69B Elect Safety I-Qualified Worker
GE-70A Hazard Communication-Qualified
GE-81A Ladder Safety-Qualified
PS-01 Photon Sciences Employees and Building
Occupants
PS-01A PS Building 740/747 - General Site Access
PS-03S PS Building 725 Scientific/Technical Access
(Encoded)
PS-302 PS Tech Staff, Designer/Drafter
PS-R44 PS Safety System Work Permits (Proc)
PS-T20 Tech Work, Env Awareness Elec/Mech Assembly
PS-T25 Tech Work, Env Awareness Vacuum Systems
ISLAND DRAFTING AND TECHNICAL INSTITUTE
June 1993 to
August 1993
COMPUTER AIDED DESIGN DRAFTING/DESIGN CERTIFICATE - AUTOCAD R12.
NEW YORK INSTITUTE OF TECHNOLOGY
September 1983 to
January 1985
BACHELOR OF MANUFACTURING ENGINEERING TECHNOLOGY
S.U.N.Y. FARMINGDALE N.Y.
September 1981 to May 1983
ASSOCIATES DEGREE IN MANUFACTURING ENGINEERING SCIENCE
GRUMMAN AEROSPACE CORPORATION
August 1986 to
November 1986
Course in advanced stress including statics and dynamics, strength
of materials for application,
CADDAM, AUTO-CAD R10 AND 11.