Over twenty years experienced in Electrical and Control Systems

Engineering, including five years with KBR, CSE department. Extensive

domestic and International experience, working with a wide variety of field

Instrumentation, Control systems and electrical equipment. Experience with

EPC projects, developing designs in Instrumentation, Electrical and Control

for the Industry Oil and Gas, Petrochemical, LNG, Refinery, offshore

Platforms, Automotive and Beverages. The projects have included facilities

with on-line Analysis and monitoring systems, pneumatics, electronics, DCS

and PLC's. Field support experience, by implementing Control systems.

Professional Experience

Processes Unlimited International, Bakersfield, CA. Working through the

Global Edge consultants.

Instrumentation/Electrical Designer, 2013 - Present

Design the Instrumentation package of the projects in the Oil and Gas

department. Projects included Instrument Location Plans, Instrument

installation Details, Conduit routing for Instrumentation and

communications, Cable and wire Schedule, Junction Box Wiring diagrams and

MTO. Also, design of the Electrical engineering package when it was

required. The project had included One-line diagrams, Grounding, Lighting,

Power, Hazardous Areas, Switch rack elevation drawings, Electrical details

and cable Schedule.

KBR Inc., Monterrey, N.L. M xico

Senior Technical Professional, 2011 - 2013

Nova, Molycorp, Yanbu, Chevron and Kitimat Projects:

Control Systems Engineering project leading, working together with Houston

and Birmingham Operation Center. Travels to project meetings to define

scope and to work on first go by's to complete the task in Monterrey

Engineering Center. Manage WMS to control the project budget. 3D model for:

Off-line instruments, supports, Junction Box Racks and Control Valves

according to vendor data. Assist to Client Model Reviews. Responsible for

the production of drawings like Loop Diagrams extracted from SPI and edited

in AutoCAD; Instrument Location plans, J.B. Wiring Diagrams, ICS block

diagram, Installation Details, including cryogenic service, Supports and

J.B. Typical routing. Wiring: cross-connection and diagrams for PLC, DCS

and SIS Systems. Materials Take Off. Assign process installation details to

Index. Update and create Datasheets for Instruments Specification. Software

Tools: SPI, PDS, CompCon, SmartPlant Review, Navisworks, Microstation,

AutoCAD.

2006-2010 - Grohmann Engineering, Germany.

Leading the Project and implementing in Mexico the automated system TAB

bonder, in coordination with the office in Germany, at Lexmark plant.

Installation, configuration, start-up, validation, field support, fail

analysis and software upgrades. The system includes a wide variety of

Mechatronic equipment including linear motors technology for the movement

of the X, Y and Z Axis. Electrical test, Vision software and hardware for

process control, HMI software, Electrical schematics for troubleshooting.

Trained in the TAB bonder and worked in the fabrication of the placement

machines for Intel, in the final test phase, at Grohmann's

headquarter/plant in Germany.

Industrial Pro Control, Monterrey, N. L.

Electrical and Control Engineer, 2005-2006

Control panel designs for the automotive industry. Electrical and control

construction drawings. Selection and specification of the Instrumentation

and control devices like: PLC, sensors, contactors, breakers, etc. Project

Integration and supervision. Tests and start up.

BTU International Inc. Lowell, MA.

Field Service Engineer, 2001-2005

Field service engineering in a wide variety of control systems equipment,

including analyzers, sensors, and electronics. Use of HMI software and

electrical/control schematics for diagnostic and fail solution. Training

received in Lowell Massachusetts at BTU Headquarters. Control system

equipment Installation like retrofits (valves, sensors, electronics and

wires)

Prior Experience with KBR:

KBR Inc., Monterrey, N. L.

E&CSE Technical Professional, 1998 - 2001

Design based on technical specifications, Technology work plan, design

highlights and P&ID s of each project. Design of instrument location

Plans, Installation details, Process piping details, Instrument support

details, Instrument wiring conduit plans, Cable schedule, Instrument wire

list. Materials take off and Instruments Specification. Manage and file of

Project technical documentation.

Software tools: Micro station 2D & 3D, AutoCAD, PDS "EE Raceway and

Equipment modeling", PDS " Instrument Data Management System", PDS Drawing

Manager, INtools, Design Review.

1996-1998 - INTERTEC, Monterrey, N. L.

Telecommunications Specialist, responsible for the Infrastructure in the

telecomm department. Technical support to the telecommunication network,

including Frame Relay Switches, Routers, TDM multiplexers for voice, data

and video, achieving the communication between offices in ten different

cities. It also included the voice network with Nortel equipment. Certified

in Nortel's PBX and Newbridge's TDM Multiplexers. Experienced in

communication protocols and fiber optics.

1994-1996 - Coca-Cola, Monterrey, N. L.

Installation, configuration, start up, test and field support to control

systems equipment with HMI software, electrical schematics and

instrumentation for on-line analysis and control for the automatization in

the preparation of carbonated soft drinks for four Coca-Cola production

plants.

Year Client Project Project Project Project Project

Name Location Type Scope Role

2013/20 Berry Tidewater Kern County, Oil & Gas EPF Instrument

14 Petroleum California Designer II

2013 California 35Z Kern County, Oil & Gas EPF Instrument

Heavy Oil California Designer II

2013 Berry Shipping Kern County, Oil & Gas EPF Instrument

Petroleum Facility California Designer II

2013 Berry Fairfield Kern County, Oil & Gas EPF Instrument/Ele

Petroleum California ctrical

Designer II

2012/20 Nova NGL Cracker Corunna, NGL Revamp Sr. Technical

13 Chemicals Revamp Ontario, Professional

Canada

2012 Molycorp Project Mountain Rare Earth EPC Sr. Technical

Phoenix Pass, Materials Professional

California

2011/20 Chevron Big Foot Gulf of Offshore EPC Sr. Technical

12 Mexico, USA Professional

2011 Kitimat Kitimat LNG Bish Cove. LNG FEED Sr. Technical

B.C. Canada Professional

2006-20 Lexmark TAB Bonder Germany - Control Engineerin Field Engineer

10 Juarez, Mex Systems g, support Lead

Installati

on,

Support

2006 Nemak Motor Head Ramos Arizpe, Automatization Engineerin I&CS /

Separator N. L. g Electrical

leader

2005 General Transmission Garcia, N. Automatization Engineerin I&CS /

Motors Detector L., M xico g Electrical

leader

2001-20 Celestica, Reflow Furnace Lowell, MA, Control Engineerin Field Engineer

05 Solectron, USA - Systems g support Lead

FCI, Monterrey, Installati

Motorola. Mex. on,

Support

2001 Phillips Q-Chem Qatar Ethylene EPC CSE Technical

Petroleum Professional

2000 BP Amoco Lao Prairie Alberta, LAO EPC CSE Technical

Rose Canada Professional

1999 Exxon Mobil SOP Jurong Olefins EPC CSE Technical

Island, Professional

Singapore

1998 Aristech Phenol Unit Haverhill Petrochemical Engineerin I&CS /

III, Ohio, USA g Electrical

leader

1995 Coca -Cola Process Monterrey, N. Carbonated Installati Field Service

Automation L., Mex. Soft Drinks on, Engineer

Support

Qualifications

B. S. Control and Computer Engineer

Universidad Aut noma de Nuevo Le n, 1993

Studies of Master in Electrical Engineering

UTEP (University of Texas at El Paso) 2009

Market Sectors

Oil & Gas

Offshore platforms

LNG

Petrochemical

Beverages

Automotive

Personal

4705 Alden Ct.

Bakersfield, CA. 93311

Tel. 661-***-****

acc7v7@r.postjobfree.com

Contact this candidate