Curriculum vitae

Name: Mohamed Galal Mohamed Khalil

Mobile: +2-010******** & +964-7801427551

Email: acbphs@r.postjobfree.com

Career Objectives

I'm active engineer who develops his skills every time,I'm awareness by

learning the new techniques which help me in work and I'm seeking for a

job at a place where I can learn new things every day. I can work under

pressure, work in team, lead group and learn anything in low time.

Education

1. BSc of Mechanical Engineering (Production Section) 2009 - Al-Azhar

University - Good degree.

2. CWI Certified Welding Inspector (certificate no: 12072261).

3. API Authorized Piping Inspector (certificate no: 47370).

4. ASNT NDT Level II in MT, PT, RT, UT and VT.

5. PAUT Level II.

6. TOFD Level II.

Notes:

1. I attended API Authorized Pressure Vessel Inspector exam (API 510) and

waiting for result.

2. I plan to be ASNT Level III in MT, UT in May 2014.

Graduation Project

My graduation Project was in Ergonomics (Ergonomics looks at what kind of

work you do, what tools you use and your whole job environment. The aim

is to find the best fit between you and your job conditions) this subject

is related to job design and safe work shop designing.

Degree: Excellent.

Skills

1- The ability to do the following:

o Review Materials certificates.

o Review PQR.

o Review WPS.

o Review the drawing.

o Inspection of Fit up.

o Supervising of Welding Process.

o Inspection of Tightening.

o NDE (Non Destructive Examination MT, PT, RT & UT).

o Automatic Ultrasonic Testing (Phased Array) PAUT.

o Time of Flight Diffraction (TOFD).

o Dimensional Inspection.

o Inspection of heat treatment.

o Inspection of Hydro Test.

o Inspection of sand blasting.

o Inspection of Painting.

o In-service Inspection.

o Perform visual inspection in accordance with API 570 On-stream

Inspection.

o Calculating the corrosion rate, Inspection intervals and the remaining

life in accordance with API 570 On-stream Inspection.

2- Familiar with codes and Standards (ASME, ASTM, API, AWS, EN, ISO).

3- Familiar with safety programs.

Experiences

1- From 01/05/2013 until now:

Company: Exxon Mobil Co

Job: Plant Inspector

Work scope:

o In-service inspection of plants

Duties:

o Perform visual inspection in accordance with API 570 On-stream

Inspection.

o Calculating the corrosion rate, Inspection intervals and the remaining

life in accordance with API 570 On-stream Inspection.

o Calculating the maximum allowable working pressure.

o Review the design.

o Review the drawing.

o Review the Procedures.

o Complete piping inspection checklists.

o Identify all possible dead legs & small bore piping on drawings.

o Identify all soil/air interface and coating damage.

o Complete piping inspection template and submit to company with photos of

all findings

o Choosing TML Points.

o Choosing Profile radiograph points.

o Issuing a report of plant status.

Projects:

o In-service Inspection of WEST QURNA I Oil Fields (Basrah Iraq).

2- From 24/04/2012 until 30/4/2013 :

Company: Cairo Inspection Company (CIC)

Job: QC Head & Instructor (Conducting Welding Inspection Training

Courses).

Work scope:

o Inspection of Pressure Vessel, Oil Tanks, Piping, Pipelines and Steel

Structure.

o Conducting welding Training Courses.

Duties:

o Review Materials certificates.

o Review PQR.

o Review WPS.

o Review the drawing.

o Inspection of Fit up.

o Supervising of Welding Process.

o Inspection of Tightening.

o Visual Inspection of the welding.

o Non Destructive Testing for Joints (MT, PT, RT & UT).

o AUT (Automatic Ultrasonic Inspection) PAUT.

o Time of Flight Diffraction (TOFD).

o Dimensional Inspection.

o Inspection of heat treatment.

o Inspection of Hydro Test.

o Inspection of sand blasting.

o Inspection of Painting.

o Vibration Analysis.

o In-service Inspection.

o Preparing the Quotations.

o NDE Inspector in ASME review for MEGA, Al-Basmalah Contracting, PSC, DSD

and PSP companies.

Projects:

o Inservice Inspection of Volcanica Company EGYPT.

o Inservice Inspection of Haliburton Company EGYPT.

o Inservice Inspection of Schlumberger Company EGYPT.

o Inservice Inspection of WEST DIKIRNIS LPG Plant South Patra (Melrose

Petroleum EL-Mansoura Co) EGYPT.

o WEST DIKIRNIS REFRIGERATION-PHASES 1, 2&3. (Melrose Petroleum EL-

Mansoura Co) EGYPT.

o HADIDA Balilaa Transit Pipeline Fast Track Project (SPPC & Petro energy

Co) ( SUDAN).

o Miraco Carrier Vessel (Petrojet)

o GHABBOUR GROUP (NEW EXHIBITAION & MAINTENANCE WORKSHOP) (ASF) EGYPT.

o CREDIT AGRICOLE EGYPT HEAD OFFICE (Orascom) EGYPT.

o North Giza Power station (PSC) EGYPT.

o Inspection of Drilling Pipes (Hebei Yaoshoeng Petroleum Special pipes

co) CHINA.

o Alteration of Vertical Filter/Separetor (Petrobel) Egypt.

o QPC Power station (ENNPI/QARUN) EGYPT.

3- From 31/07/2010 until 29/02/2012:

Company: Madinah Turkish Company for Contracting and Maintenance (MTC)

Job: QC Engineer

Work scope: Inspection of Oil Tanks, Steel frames, Piping, Shading

Area.

Duties:

o Review Materials certificates.

o Review PQR.

o Review WPS.

o Review the drawing.

o Inspection of Fit up.

o Supervising of Welding Process.

o Inspection of Tightening.

o Dimensional Inspection.

o Visual Inspection of the welding.

o Non Destructive Testing for Joints (MT, PT, RT & UT).

o Inspection of heat treatment.

o Inspection of Hydro Test.

o Inspection of sand blasting.

o Inspection of Painting.

Projects:

o General Class rooms male (B16c) in Taibah University.

o Housing of Air Forces King Abdu AL-Aziz Air Base.

4- From 01/09/2010 until 29/02/2012 (Part Time):

Company: Attiah Thobity & Bross Co for Contracting and (ATC)

Job: Planning Engineer

Work scope: Preparing and Updating the Project Time Schedule

Project:

o General Class rooms male (B16c) in Taibah University.

5- From 10 /10/2009 until 15/07/2010:

Company: Quality Engineering Group (QEG) Egypt.

Job: QC Engineer

Work scope:

Inspection of Oil Tanks, Steel Structure Building, Kilns, Piping,

Shading Area.

Duties:

o Review Materials certificates.

o Review PQR.

o Review WPS.

o Review the drawing.

o Inspection of Fit up.

o Supervising of Welding Process.

o Inspection of Tightening.

o Dimensional Inspection.

o Visual Inspection of the welding.

o Non Destructive Testing for Joints ( MT,PT,RT & UT).

o Inspection of heat treatment.

o Inspection of Hydro Test.

o Inspection of sand blasting.

o Inspection of Painting.

Projects:

o GOE Cement Project (The project is construction of cement factory).

o Sidi-Krir power stations (Toshiba).

o Steel tanks in Arab contractors work shop (Tamouh).

o Susan Mubarak Museum.

o Al-Amieria Drainge station.

6- From graduation until 08 /10 /2009:

Company: Industrial Projects Company (INPEC) Egypt.

Job: Workshop Production Engineer

Work scope: fabrication of steel projects (Steel Structure Buildings,

Steel Beams, Steel Girders, Steel Stairs, Pylons, Pipelines, heat

exchangers.

Duties:

o Review Drawings.

o Preparing the daily production plan.

o Review Materials certificates.

o Review the drawing.

o Supervise the Cutting Process process.

o Supervise the Fit up process.

o Supervise the welding process.

o Supervise the Sand blasting process.

o Supervise the Painting process.

Projects:

o New air traffic control tower in Cairo International Airport

o Orascom

o Abu Qir Thermal Power Plant units 6&7

o West delta electricity Production Company

o El Katamiya Highland International Club

o CMS

o El-Atf power stations (Toshiba)

o Sidi-Krir power stations (Toshiba)

o Middle delta electricity Production Company

o Delta Steel Mill (Furnaces, Tanks, Elbows...etc.)

o Sphinx, El-Borg & NPC office buildings

o Smart Village

Trainings

1- API 570 Course (API Authorized Piping Inspector Training Course) from

08/09/2012 to 19/09/2012.

2- CWI Certified Welding Inspector (Training Course) from 07/04/2012 to

25/04/2012.

3- Primavera Training Course from 05/03/2012 to 29/03/2012.

4- Auto CAD 2D Course from 02/08/2008 to 28/08/2008.

5- Training in GCF (Great Cairo Foundries) which works in field of

production of Valves, Pipes and Fittings from 19/07/2008 to 24/08/2008.

6- Training in Gasco from 29/06/2008 to 17/07/2008 (Training course in

Pipelines welding and inspection).

7- Training in EMC (Egyptian Maintenance Company) from 29/07/2007 to

12/08/2007 (Training course in Pipelines inspection).

8- Training course in Non-Destructive Testing within the recommendation of

the American Society of Non Destructive Testing ASNT in the following:

o Liquid penetration testing PT (SNT TC 1A) Level II.

o Magnetic Particle testing MT (SNT TC 1A) Level II.

o Radiographic testing RT (SNT TC 1A) Level II.

o Ultrasonic Testing UT (SNT TC 1A) Level II.

o AUT Phased Array (SNT TC 1A) Level II.

o Visual Inspection Testing VT (SNT TC 1A) Level II.

Languages

Arabic: Mother tongue.

English: Fluent.

Computer skills

1- Professional in using:

o Windows (Win 8, Win 7, Vista, XP Sp2, 2000, ME, and 98).

o Auto CAD 2D.

o Internet.

o Office 2010, Office 2007, Office 2003.

2- Good in using:

o Microsoft Project.

o Primavera Project Planner P6 & P3.

3- High speed in Typing.

4- Good in maintenance of Soft and Hard Ware.

Personal data

Gender: Male.

Date of Birth: 11/12/1986

Phone Number: +2-040-*******

Fax: +2-040-*******

Address: 17 El-Maamoon St, El-Mehta St, Giza, Egypt.

Religion: Muslim.

Marital status: Engaged.

Nationality: Egyptian.

Wiling to relocate: Yes

Military state: Exempted.

Driving license: Valid.

All references will be valid upon required

Thanks for

interest[pic][pic][pic][pic][pic][pic][pic][pic][pic][pic][pic][pic][pic][pic]

[pic][pic][pic][pic][pic][pic][pic][pic][pic][pic][pic][pic][pic]

Contact this candidate