Resume of R.VIMALKUMAR

PERSONAL DETAILS:

Vimalkumar.R

Name

** ***** & 19/07/1982.

Age & Date of Birth

Indian

Nationality

L3047079 valid up to 25.08.2023, issued at Chennai, India.

Passport Number

India: F/TN/001/013766/2004; Date of Expiry:09/08/2024

Driving License Number

Dubai: 1340884; Date of Expiry:12/11/2018

N.No:105/2; O.No:34, Mettu Street, Ayanavaram, Chennai-

Permanent Address

600023, Tamilnadu, India.

+91-960******* / 960*******

Contact number

acbbkw@r.postjobfree.com

E-Mail ID

Manager-Electrical Tractions & SCADA

Position

10 Years in Protection Engineering & SCADA of T&D

Experience

Network

EDUCATIONAL QUALIFICATION:

Name College Year Attended Qualification

University/ Institution From - To Certificate / Diploma /Degree

Master’s in Business Administration

Madras University,

2012 to Till date (MBA) in International Business

Chennai, India

Management (2 yrs) pursuing from 2012.

Bachelor of Engineering (4 yrs) in

Madras University,

2000 to 2004 Electrical & Electronics Engg. With

Chennai, India

First Class

Institution of Engineers, India 2006 Associate Member of the IEI, India

TRAINING ATTENDED:

Name of the Training Organisation

Certificate Course in Protection & Substation Automation like

ABB University,

RE670 protection & Control IED with PCM600 toolbox,

Switzerland.

Integration for Substation Automation Systems & IEC61850 for

Substation Automation.

Configuration of ABB relays for REX, RET, REC, REF, REL

ABB, Sweden.

ABB series using CAP 505 And CAP2/316 configuration tool.

Configuration and established communication of ABB

ABB, Dubai.

MicroSCADA using LON Works, ABB SPA, IEC101, IEC103

protocols and 61850 protocols.

Configuration and established communication of Rugged COM

ABB, Egypt.

Ethernet Switches

ABB, Dubai.

Project safety management

Handling knowledge of HMI (Human Machine Interface) &

ABB, Dubai.

working with Micro SCADA

ABB, Dubai.

LCP (Leadership Challenging Program)

ABB, Dubai.

OECD Anti-Bribery code of conduct course

Bloom Asia, Mumbai

Electrical Safety Audit Training

PMI, Chennai chapter

Project Management Training

+ Anna Institute of

Management, India

Indian Institution of

Technical Arbitrators,

Arbitration Practice Step by Step

Chennai chapter, India

Step by step procedure for Installation, Testing & Commissioning

SIEMENS, India

& Maintenance of SIEMENS Step7 & VISCOS RSC Software

used in SCADA & RTU’s.

CMRL, India.

Documentum & DomDoc (Document management system)

COMPUTER EXPERTISE:

Basic, dbase.

Languages

C, C++, VB and Java.

Programming Languages

MS-Office.

Packages

AutoCAD 2009.

Other Skills

HTML.

Web designing tools

Ms-Dos, UNIX, Windows XP, 95, 98, 2000 & 2007.

Operating system

WORK EXPERIENCE

PROFESSIONAL EXPERIENCE # 1

M/s. CHENNAI METRO RAIL LTD (CMRL).,

(Joint venture of Govt. of India & Govt. of Tamilnadu)

Name of the

Employer Power Supply, OHE & Traction division,

Chennai, India.

May’2012 to Till Date

Period

Manager-Electrical Traction & SCADA

Position Held

Scope of Work Client side role to provide advice and approvals on Electrical &

SCADA Systems technical issues related to design review and

compliance with the specifications. Managing the Electrical &

SCADA aspects of projects, both from a technical and managerial

perspective.

Design verification, Vendor Approval, Erection, Testing &

Commissioning of Receiving Sub-Station’s, Depot Aux. Sub-Station’s,

Station Aux. Sub-Station’s, RTU’s, RPU’s, Power SCADA, Traction

SCADA, Ventilation & Air-conditioning SCADA, Mechanical-

Electrical-Plumbing SCADA & Tunnel Ventilation System SCADA

Equipment’s.

Working knowledge and implementation experience in RAMS of RTU

and SCADA systems.

Ensuring Electrical Safety & method standards like IS, IEEE, IEC,

EN, NFPA (national fire prot. association) 70 NEC (national electric

code), ANSI, AEEE C2 NESC (National Electrical Safety Code),

NEMA (national electrical manufacturer association), NACE (National

Association of Corrosion Engineers) and (ISO 9001) in industrial

electrical power distribution and control systems.

Provide technical support to site, project team, maintenance

department and independently handle electrical works as Job officer

covering all aspects of engineering activities in my discipline for a

variety of small and large project works.

Provide assistance to the Job officer in defining the electrical

requirements and in the performance of electrical engineering for the

assigned works till execution of job.

Participate in site surveys of existing facilities to establish and identify

the actual requirements for assessment and approval of best initiatives,

study assessments and facility changes.

Participate in monitoring and reviewing engineering design carried out

by Consultant / Engineering Companies including feasibility,

conceptual, basic and detailed engineering.

Coordinate with other discipline engineers including planning, HSE,

costing etc during the development of the engineering & site works, to

ensure conformity of engineering with end user’s requirements.

Prepare technical documents including equipment data sheets, scope of

work, documentation requirements, testing and commissioning

requirement.

Carry out technical bid evaluations, response to various technical

queries, assessment of bid documents for services and material

required for the works. Participate in the clarification meetings with

contractors and Vendors to ensure compliance with technical

specifications & requirements. Provide technical evaluation reports

and recommendations for order placement.

Preparing engineering packages for upgrading, replacement and

modification of electrical equipment comprising scope of work, data

sheets, MTO, cable schedules, tie-in schedules and various layout

drawings.

Preparing engineering packages, SOW for Procurement &

Construction works for various packages units such as Receiving end

substations, Auxiliary main substation, Auxiliary substation & Traction

Over Head Equipments (OHE) units, etc.,

Developing electrical engineering calculations such as short circuit

levels, voltage drop calculations for motor starting, Transformer, DC &

AC UPS system sizing, lighting, cable ampacity calculations and relay

setting calculations / curves etc.

Developing single line diagrams, schematic diagrams, trouble shooting

diagrams, Cable routing, earthing and lighting layouts and hazardous

area classification documents.

Performing adequacy check for existing electrical panels and sizing

calculations for existing cables and power feeders.

Carrying out vendor drawing review and approval of

vendors/contractors drawings/technical documents for 110 kV GIS

(Switchgear), 33 kV AIS (Switchgear), Auxiliary Power

Transformer(Oil Type), Traction Transformer (Oil Type), 25 kV

Switch gear, MAST, Auxiliary Power Transformer (dry Type), EOT

Crane, 33kV & 25 kV Cables, DG Set (Diesel Generators), Battery &

Battery Charger, DCDB, Contact wire, NGR (Neutral Grounding

Resisters), 110 kV LA & 42 kV LA, CD insulators, Wheel tensioning

device, ASNS, FOCS, Aerial Earth Wire, 25 kV Isolators, 25 kV

Section Insulators, Tank protection CT, SCADA, A/C units, substation

building and other associated industrial / hazardous electrical

equipment.

Review FAT / SAT procedures, witnessing tests, installation, testing,

commissioning at site, AS BUILT documents and identifying spare

parts requirement.

Prepare / assist in project close out reports / issue of FAC to contractor.

3 No’s of Receiving Substation (RSS), CMRL, Chennai, India.

3 No’s of Aux. Main Substation (AMS), CMRL, Chennai, India.

32 No’s of Auxiliary Substation (ASS), CMRL, Chennai, India.

Projects Handled

54Kms of OHE works, CMRL, Chennai, India.

Power SCADA, Traction SCADA, VAC SCADA, MEP SCADA &

TVS SCADA works for above said items, CMRL, Chennai, India.

PROFESSIONAL EXPERIENCE # 2

M/s. ABB Global Industries & Services LTD.,

Name of the Employer Power System – Substations division,

Chennai, India.

Mar’2010 to May’2012

Period

Protection Design Engineer

Position Held

Preparation of detailed Relay and Metering Single Line Diagram

for sub-stations from 11 kV to400 kV.

CT & VT sizing Calculation.

Selection of protection relays in line with specification and

systems requirements.

Preparation of Protection Logic Diagram.

Preparation of Interlock table and Interconnection Charts.

Review and interface the GIS, AIS, Transformer with Protection

and Control Panels.

Preparation of GIS local control cabinet scheme.

Discussion with vender / Customer (SEC) for finalizing the

drawing /documents approval.

Review of Control and Relay panel Schematics for Line feeder

protection, Transformer protection, AVR, Bus bar protection Auto-

reclose scheme, etc.

Transient Fault Recorder (TFR) interface and review of vendor

Scope of Work

submittals.

SCADA / DCS interface and review of vendor submittals.

Protection Communication equipment interface and review of

vendor submittals.

Substation Alarm (Annunciation) Communication interface.

Sequential Evan Recorder (SOE) / Disturbance recorder interface

and review of vendor submittals.

Preparation of power & control cable schedule.

Preparation of Inter Panel Wiring Table & Label List.

Preparation of Inter Panel Cut-out Drawings.

Preparation of Cable interconnection (core termination) schedule.

Co-ordination with Vender manufacturing team for smooth

execution.

Co-ordination with Commissioning Engineer for field

commissioning.

Projects Handled 220/66/21/11kV GIS SS, Dahiyat Al Sheef SS, Bahrain.

220/66/21/11kV GIS SS, Marsha Al Bahrain SS, Bahrain.

220/66/21/11kV GIS SS, Isa Town North SS, Bahrain.

220/66/21/11kV GIS SS, Diyar Al Muharraq SS, Bahrain.

220/66/21/11kV GIS SS, Addur SS, Bahrain.

220/66/21/11kV GIS SS, Riff’a SS, Bahrain.

. 220/66/21/11kV GIS SS, Um Al Hassam SS, Bahrain.

220/66/21/11kV GIS SS, Amwaj SS, Bahrain.

220/66/21/11kV GIS SS, Madinat Hamad SS, Bahrain.

PROFESSIONAL EXPERIENCE # 3

M/s. ABB Industries LLC.

Name of the Employer Power System – Substations Automation division,

Dubai, U.A.E

Feb’2007 to Mar’2010.

Period

SCADA Testing and Commissioning Engineer

Position Held

Installing, Configuring, Testing & Commissioning of substation

control system/desk control system (SCS/DCS) as like Micro

SCADA control system (ABB) adopted by DEWA (Dubai Electricity

and Water Authority) substations in Dubai.

Configuring, Testing & Commissioning of Bay Control Units

(BCU) like REC 316*4 and Bay Control Protection Units like

REF 545 & REF542plus.

Working & Testing knowledge of IED’s like IED670.

Configuration of ABB relays for REX, RET, REC, REF, REL

ABB series using CAP 505, And CAP2/316 configuration tool.

Scope of Work

Configuration and established communication of ABB

MicroSCADA using LON Works, ABB SPA, IEC101, IEC103,

IEC104 protocols and IEC61850 protocols.

Handling knowledge of HMI (Human Machine Interface) &

working with Micro SCADA.

Preparing of Substation Integration Drawings with Relay panel,

Control panel & SCADA Panels.

Co-ordination with Commissioning Engineer for field

commissioning.

220/66/21/11kV GIS SS, Bahrain Financial Harbor, Kingdom of

Bahrain.

132/11kV GIS SS, Dubai Festival City-II, Dubai, U.A.E.

132/11kV GIS SS, Maha, Dubai, U.A.E.

132/11kV GIS SS, International Media Production Zone, Dubai,

U.A.E.

132/11kV GIS SS, Silicon Oasis, Dubai, U.A.E.

132/11kV GIS SS, Baraha, Dubai, U.A.E.

132/11kV GIS SS, WARQA, Dubai, U.A.E.

132/11kV GIS SS, Business Bay, Dubai, U.A.E.

Projects Handled

132/11kV GIS SS, Burj Residence, Dubai, U.A.E.

132/11kV GIS SS, SEEF, Dubai, U.A.E.

132/11kV GIS SS, DIWL, Dubai, U.A.E.

132/11kV GIS SS, BARS, Dubai, U.A.E.

132/11kV GIS SS, MZHR, Dubai, U.A.E.

132/11kV GIS SS, TCRA, Dubai, U.A.E.

132/22kV GIS SS, RAHA BEACH-B S/S, Abu Dhabi, U.A.E.

132/11kV GIS SS, DEMA ISLAND S/S, Abu Dhabi, U.A.E.

33/11kV GIS SS, MADINAT ZAYAD S/S, Abu Dhabi, U.A.E.

PROFESSIONAL EXPERIENCE # 4

M/s. SIEMENS Pakistan Engg. Co. Ltd,

Name of the Employer Power System – Substation Project division,

Dubai, U.A.E

Dec’2005 to Feb’2007.

Period

Testing and Commissioning Engineer

Position Held

Testing & Commissioning, trouble shooting, maintenance of

132/11kV Substation equipments viz. Protection relays, CT's,

VT's, Power transformers, HV, MV, LV circuit breakers, battery,

battery chargers and inverters.

Testing & Commissioning, trouble shooting of power system

protection schemes such as O/C and Earth fault protection,

Transformer differential protection, Busbar differential protection,

pilot wire protection, Restricted earth fault protection.

High voltage test of power cables, pilot cables, Switchgears and

Busbars.

Conversant with Busbar CT's primary injection tests, transformer

differential, stability and sensitivity test, Busbar differential,

Scope of Work

stability and sensitivity test.

Conversant with Secondary injection testing of Substation

protective relays (Make - ABB, ALSTOM(AREVA), SIEMENS,

REYROLLE)

Installation, Supervision & Commissioning of SCADA, Telecom

devices.

Preparation of control cable and power cable pulling schedule and

termination schedules.

Calibration and loop check of transmitters & MOV from field to

DCS.

Co-ordination with Commissioning Engineer for field

commissioning.

132/11kV GIS SS, Ahamadia, Dubai, U.A.E.

132/11kV GIS SS, AlFahidi, Dubai, U.A.E.

132/11kV GIS SS, Dubai Health Care City, Dubai, U.A.E.

132/11kV GIS SS, Burj Dubai-II, Dubai Mall, Dubai, U.A.E.

Projects Handled

132/11kV GIS SS, Dragon Mall, Dubai, U.A.E.

132/11kV GIS SS, Gardens of Paradise, Dubai, U.A.E.

132/11kV GIS SS, Dubai Investment Park-I, Dubai, U.A.E.

PROFESSIONAL EXPERIENCE # 5

M/s. Energy System International Design & Services pvt

Name of the Employer Ltd,

Power System – T & C division,

Chennai, India.

May’2004 to Dec’2005.

Period

Junior Testing and Commissioning Engineer

Position Held

Scope of Work Conversant with Bus bar/CT's primary injection tests, transformer

differential, stability and sensitivity test, bus bar differential,

stability and sensitivity test.

Testing and commissioning of Bus bar Protection Panels & Relay

panel protection relays (Numerical protection relays and aux.

relays) & panel meters.

Trouble shooting and testing & commissioning of power system

protection schemes such as O/C and Earth fault protection,

Transformer differential protection, Bus bar differential

protection, pilot wire protection, Restricted earth fault protection.

Testing & Commissioning, trouble shooting, maintenance of

Substation equipment viz. CB, IS’s, ES’s, LCC panels, LVAC, DC

Systems, CT's, VT's, ACDB, DCDB, Earthing, Battery, Battery

chargers and Inverters.

Checking of Interconnection cable schedules and modification.

High voltage test of power cables, pilot cables, Switchgears and

Bus bars.

Indian oil corporation Ltd., (Refinery project work), Panipet,

India.

ONGC – ABAN LOYDS CHILLS PVT LTD., (Off shore Oil rig),

Bombay high, India.

Combined cycle power plant, Karupur, Mayavaram, Tamilnadu,

India.

North Delhi power limited, 33/11kV S/S, Ramapura, Delhi, India.

220/110/66/33KV SS, MRS, Shimogoa, Karnataka, India.

110/11 KV SS, Tiptur, Karnataka, India.

Vensure Power Systems (Balmer Lawrie), MEPZ, Thambaram,

Projects Handled

Chennai, India.

6.6 KV S/S, Chennai Petroleum Corp.Ltd., Manali, Chennai,

India.

25 KV S/S, Delhi Metro Rail Corporation – Line-3 Project, New

Delhi, India.

33/11kV S/S, HSBC Building, Hitech city, Hydrabad, Andhra

Pradesh, India.

132/11kV S/S, Hidustan Aeronautics Ltd, Sunabeda, Orissa, India.

110/11kV SS, KSEB, Malankara Hydro Power Project

(50MWx3), Thodhupuzha, Kerala.

DECLARATION

I hereby declare that the information provided above is true to the best of my

knowledge and belief.

Place: Chennai, India. Yours faithfully,

R. VIMALKUMAR

Contact this candidate