Reginald Robert Dennie

***** ****** *****

Humble, TX 77346 US

Mobile: 254-***-****

Evening Phone: 254-***-****

Day Phone: 254-***-****

Email: aca6d4@r.postjobfree.com

Availability:

Job Type: Permanent

Work Schedule: Full-Time, Part-Time, Shift Work

Desired locations:

United States - TX

Work Experience:

RR Donnelly

Houston, TX United States

07/2008 - Present

Salary: 17.00 USD Per Hour

Hours per week: 40

Pay Plan: Other

Facilities Specialist (This is a federal job)

Supervisor: Mike Deeter 713-***-****)

Okay to contact this Supervisor: Yes

All Aspects of Building Maintenance. Carpentry, Plumbing, HVAC, Electrical, Mechanical.

Texas Hydraulics

Temple, United States

09/2007 - 06/2008

Hours per week: 40

Maintenance Mechanic

Supervisor: Walter Seward 254-***-****)

Okay to contact this Supervisor: Yes

Maintain and repair various CNC lathes, hem saws, mazak, tube washers, hydraulic pumps, hydraulic assembly stations, drill presses, tool changers. Electrical, plumbing, building maintenance(electrical/mechanical).

Southwestern Foam

Belton, United States

10/2006 - 09/2007

Hours per week: 40

Maintenance Technician

Supervisor: Jeff Antilla (254-***-****)

Okay to contact this Supervisor: Yes

The main functions of this position are to maintain the equipment and operating systems in the facility. I accomplish this by continuously conducting walkthroughs throughout the entire facility. Occasionally, specialty maintenance is required, such as plumbing, carpentry, etc., type skills. My responsibilities include but are not be limited to cleaning and servicing air conditioning filters/vents, water coolers, furnace/furnace vent tables, dock levelers, dust collectors, HP motors, power sweep blowers, and air circulators (fans).

I maintain and operate the following: Edge Sweet Vertical/Horizontal/Tilt Saws, German built Albrecht Baumer CNC Horizontal Saw, Herman Schwabe Hydraulic Die Cutter, Selco Commercial Baler, Air Compressors, Motors, Label Machines, etc. Duties also include building maintenance, part order/supply, and inventory.

Pepsi Cola Bottling Group

Mesquite, TX United States

08/2005 - 09/2006

Salary: 31,000.00 USD Per Year

Hours per week: 40

Lab Associate/Batcher/Quality Control

Supervisor: Terriekka Cardenas 214-***-****)

Okay to contact this Supervisor: Yes

I contributed to the success of The Pepsi Bottling Group by monitoring the overall quality of products in the Quality Lab to ensure they meet Pepsi specifications.

Major Tasks, Key Responsibilities and Key Accountabilities:

• Understood quality standards and adhered to standards

• Performed water tests as prescribed by the QA procedures

• Ensured package and product quality under the guidelines set by Pepsi

• Cleaned equipment and area during and after shift

• Maintained a clean work area through good housekeeping and manufacturing practices.

• Familiar with sanitation guidelines set by Pepsi Cola Company

• Assisted in planning daily production schedule to maximize flavor change over efficiency

• Completed syrup cut off for lines and switch Pepsi tanks

•Quality Control- Knowledge of production processes, quality control and other techniques for maximizing the effective manufacture and distribution goods.

Additionally, I was responsible for: Concentrate Inventory/Management, Tank Sanitation, Reverse Osmosis Water Plant, Reach Truck Operator, Forklift Operator, and Hand Pallet Jack Operator/Manual/Battery.

East Chicago Machine & Tool INC.

NA, United States

06/2003 - 06/2005

Salary: 13.00 USD Per Hour

Hours per week: 40

Hydraulics Technician

Supervisor: Scott Galinski 219-***-****)

Okay to contact this Supervisor: Yes

I assembled mechanical and hydraulic systems, installed components, units, subassemblies, and assembly casings. I also inspected and tested all machines for operation, and recorded results. Additionally, I read and interpreted schematic drawings, diagrams, blueprints, specifications, work orders, and reports in order to determine material requirements and assembly instructions along with positioning, aligning, and adjusting work pieces to facilitate assembly. This position also consisted of the following:

*Welding- In this position, I was required to lay out, fit, and fabricate metal components to assemble structural forms, such as machinery frames using knowledge of welding techniques, and engineering requirements. I analyzed engineering drawings and specifications to plan welding operations where procedural information was unavailable.

*Forklift Operator- I ensured all company policies were adhered to and that safe operating practices were demonstrated at all times. I loaded /unloaded deliveries arriving on site, and dealt with the non inventory deliveries. Additionally, I pulled parts and transported to their various destinations.

*Overhead Crane Operator-I operated a traveling or stationary overhead crane to lift, move, and position loads, such as machinery, equipment, products, and solid or bulk materials, using hoisting attachments, such as hook, sling. Observes load hookup and determines safety of load. I manipulated or depressed crane controls, such as pedals, levers, and buttons, to regulate speed and direction of crane and hoist movement according to written, verbal, or signal instructions. I cleaned and maintained crane and hoisting mechanisms. Inspected crane for defective parts and notified supervisor of defects or malfunctions. Occasionally, I attached the load to the hook or other crane accessories for the designated Crane Operator prior to operating the crane.

*Parts Organizer-I was responsible for receiving, documenting, sorting, and inventory parts for supply and distribution.

I also assembled and tested the following machines for accurate and safe operations: Industrial Balers, Fluffers, Conveyers, Perforators, and Shredders.

Dominiack Mechanical

NA, United States

01/2002 - 11/2002

Salary: 13.00 USD Per Hour

Hours per week: 40

Plumber

Supervisor: Charles Curncutt 574-***-****)

Okay to contact this Supervisor: Yes

This position involved installation and repair of a wide variety of piping systems and equipment. I installed new construction underground plumbing, waste and vent, inspected, repaired, installed, modified, and maintained plumbing fixtures in heating, water and drainage systems. Identified electrical, plumbing and safety problems applicable to the installation and took necessary corrective action. Additionally, I measured, cut, thread, assembled, and installed pipes and tubing under supervision. Checked plumbing systems to detect leaks. Unstopped commodes, drains, sewer lines, and cleaned grease traps. Installed water and sanitary fixtures, kitchen appliances, under supervision. Made repairs to water and waste disposal systems.

I used a variety of tools including: benders, wrenches, drills, reamers, chisels, hammers, and other hand tools. I also used gas or acetylene torches and welding and soldering equipment.

Duties also entailed the following: P.V.C. Waste & Vent,

Soldering-Brazing, and Appliance Installation.

Gary Urban Enterprise Association

Gary, United States

06/2001 - 01/2002

Salary: 10.00 USD Per Hour

Hours per week: 40

Carpenter Trainee

Supervisor: Gerald Mukes 219-***-****)

Okay to contact this Supervisor: Yes

I repetitively performed these tasks: cut lumber to prescribed lengths. Installed rafters, studs, sills, floors, sub-floors, glass, wallboard, siding, sheathing, roofing building paper and insulating materials. Nails down precut interior and exterior trim such as ed quarter round, door and window trim. Applied sheet roll and shingle roofing; installs frames on casing for windows, doors, window sashes, hinges, locks and other building hardware. Applied caulking compound around doors and window casings. Replaced broken boards in rough floors; removes and replaces defective siding and patches roofs. Replaced quarry and ceramic tile in walls and floors. Made repairs to metal window frames, doorframes, metal sashes and doors. Prepared surfaces, mixed paint, applies primer, intermediate, and finish coats with brush, roller, or spray apparatus. Sprayed acoustical materials on ceilings. This experience is validated in the following ways as Iperformed the following tasks: stain-grade trim work, hang doors, drill and set door hardware, set windows, layout for stairs and common rafters, read blueprints, utilize appropriate math skills. Able to read blueprints. Mathematical skills and analytical skills necessary to do material estimates.

I was responsible for insuring buildings were properly maintained to include: roofs, walls, spouting, doors, windows and interior furniture. I assisted in maintaining facilities (interior and exterior) in an outstanding condition of readiness by accomplishing timely carpentry maintenance as well as major improvements and renovations. Some of my major duties included the operation of all types of woodworking equipment to include: table saw, radial saw, planer, jointer, drill, etc. I performed window, door, and minor roof repairs.

I demolished and/or constructed interior building partitions. Performed finish carpentry work, i.e., moldings, trim work, cabinets, etc. I hung drywall as required and performed drywall finishing. I Installed drop ceilings when necessary and vinyl title. I responded in an expeditious and timely manner to all work requests regarding carpentry expertise. Lastly, I assisted in loading and unloading building materials from delivery trucks and was responsible for following all safety policies and procedures in the performance of assigned duties.

I operated and used a wide variety of specialty woodworking machines and tools. I set up, adjusted, and maintained tools to meet required specifications. I have hands on experience with the following tools: Power Drills, Hammer Drills, Pipe Threader, Miter Saws, Circular Saws, Saber Saws, Table Saws, Table Saw Aids, Drills, Power Screw Drivers, Cordless Tools, Routers, Abrasive Planes, Sanders, Staplers, and Nailers.

I planned, measured, and layed out carpentry materials by interpreting complex or incomplete instructions, sketches, and building codes. This was also accomplished with general and precision woodworking techniques.

Reactor Services Inc.

NA, United States

04/1999 - 01/2001

Salary: 10.50 USD Per Hour

Hours per week: 40

Catalyst Technician

Supervisor: Parish Hayden 219-***-****)

Okay to contact this Supervisor: Yes

*Industrial Vacuuming

*Confined Space Tech.

*Special Air Monitoring Systems Tech.

* Vacuum Truck Operator

*Forklift Operator

Enterprise Truck Line Inc.

NA, United States

10/1996 - 04/1999

Salary: 10.00 USD Per Hour

Hours per week: 40

Warehouse Supervisor

Supervisor: John Franklin 219-***-****)

Okay to contact this Supervisor: Yes

*Dock Supervisor

*Load & Unload Refrigerated Freight

*Tractor Trailer Maintenance

*Forklift Operator

*Warehouse Maintenance

L.W.D Field Services

NA, United States

10/1993 - 10/1996

Hours per week: 40

Hazardous Waste Removal/ Tank Cleaning

Supervisor: Roger Plaskanka 219-***-****)

Okay to contact this Supervisor: Yes

*Industrial Tank Cleaning

*Pipe fitter

*Water/Sand blasting

*Vacuum Truck Operator

*Self Contained Breathing Apparatus Tech.

Education:

HoraceMann Sr. High Gary, IN United States

High School or equivalent 06/1979

Relevant Coursework, Licenses and Certifications:

Building Trades Construction Program (Indiana State)

State of Indiana Plumbing Apprentice

Job Related Training:

*Basic Computers, & Introduction To Microsoft Office

*Indiana Plan Construction Trades

*Plumbers Trades

*Dunbar Vocational Tech/Tailoring Skills

*Carpentry

*Plumbing

*Forklift operator

*Material Handler

*Water blasting

*Industrial Tank Cleaning

*Industrial Tank Cleaning

*Industrial Machinery Assembler

*Sewing

References:

Name Employer Title Phone Email

Dempsey Crabtree Pepsi Cola Bottling Group Lab Technician 972-***-**** n/a

Ben Florece Pepsi Cola Bottling Group Batcher 972-***-**** n/a

Jason Leerskov Pepsi Cola Bottling Group Q.C. Coordinator 469-***-**** n/a

Contact this candidate