Project Manager Engineer

ENEKO SANZ PASCUAL

PERSONAL INFORMATION

• Date of Birth: December 1st, 1976

• Place of birth: Pamplona, Spain

• Civil State: Married

• Mobile: +34-609******

• Home address: Avda. Carlos III 25, 3A. 31002 Pamplona (Spain)

• E-Mail: abqy2h@r.postjobfree.com

WORK EXPERIENCE

Oct 1999 to Dec 2012. R&D Department of GAMESA EÓLICA, S.A., after FIBERBLADE S.A.

(business unit of GAMESA EÓLICA, S.A.) and finally GAMESA INNOVATION & TECHNOLOGY

S.L. WIND TURBINE BLADES DESIGN, VALIDATION AND INDUSTRIALIZATION.

Oct 2004 to Dec 2012. Project manager of INNOBLADE – 4.5 Mw Modular Blade.

o It is a 62.5 m length blade (longest in the market at that moment), based on glass and

carbon fiber structure, and divided into two modules to be assembled on site (unique in

the market at that moment).

o The responsibility included performance, cost and timing, coordinating a multi functional

team of more than 50 people, budgets of more than 20 MM€ in R&D activities and 30

MM€ in productive investments.

o This development required a lot of inventions and 18 patents were granted (see annex).

o This project received in March 2012 the Innovation Award – Wind Energy, prestigious

recognition from JEC Composites, and it was also presented at the Wind Turbine Blade

Manufacture in November 2012.

Mar 2004 to Sep 2004. Project manager of several new developments: coating systems,

lightning protection system, etc.

July 2003 to Feb 2004. Project manager of a new modular blade (43.5 m length) with a

carbon fiber spar.

July 2002 to June 2003. Responsible of design and development of complete set of

moulds of the 40 m length blade. Coordination of a 12 people engineering team for this

purpose.

Jul 2000 to Sep 2001. Responsible of design and development of the complete set of

moulds of the 29 m length blade. Coordination of a 6 people engineering team for this purpose.

Oct 99 to June 2000. Responsible of the manufacturing process and redesign of the 26 m

length shells mould (external surface of a wind turbine blade).

Project Management includes the realization of feasibility analysis, risk analysis, plannings, budget

plan and follow up, product cost breakdown estimation, investments plans, working teams

leadership, clients and suppliers contacts, crisis management, etc.

Design and development of wind turbine blades includes the structural design and calculation

(manual and/or FEM) of composite structures (glass and carbon fiber reinforcement), a

manufacturing process of more than 60 m length, more than 15 tons and lower than 1 mm tolerated

pieces, materials characterization and structural testing for certification purposes, etc.

Design and development of moulds includes structural design and calculation (analytical and/or

FEM) of metallic and composite pieces, thermal design and calculation (analytical and/or FEM) of

heating systems based on heat forced air, and the manufacturing process analysis of more than 40

m length, more than 10 tons and lower than 1 mm tolerated pieces.

EDUCATION

Industrial Engineer – Mechanics

o 1994 – 2000. Public University of Navarre, Pamplona – Spain.

o 1998 – 1999. University of Padova, Padova – Italy.

Academic recognitions

o Award to Best Academic File in the course 98/99

o Honour Degree in the final Project Thesis: Design, Calculation and Construction of a

Francis Hydraulic Turbine for laboratory.

o First Graduation Award of Industrial Engineer of 1999/2000 Promotion.

SKILLS

Composites structures, product design and validation, manufacturing process development and

industrialization, certification.

Team work, leadership, work under pressure and crisis management, personal relationship,

motivation, flexibility, perseverance.

LANGUAGES

Spanish- Native speaker

English- Medium level, speaking and writing.

Italian- Medium – high level, reading and writing.

CONFERENCES

May 2009. Ateneo Navarro, Pamplona - Spain. New winds through the sustainable Energy

model. Navarre as a R&D leader of Wind Energy.

March 2012. JEC Composites Show – Innovation Award 2012, Paris - France. Innoblade –

Design and Validation of G10x Modular Blades. It included a JEC Magazine publication.

November 2012. Wind Turbine Blade Manufacture 2012, Dusseldorf – Germany. Modular

Manufacturing Process for Modular Blades.

HONORS AND AWARDS

Several recognitions during basic education (see Education paragraph).

June 2000, Pamplona. First Graduation Award of Industrial Engineer of 1999/2000

Promotion.

November 2010, Madrid. Best patent of Gamesa in the period 2004 – 2008 in the First

Gamesa Patents and Inventors Ceremony.

March 2012, París. Wind Turbine Energy Innovation Award 2012 with the project ‘Innoblade

– Design and Validation of G10x Modular Blades’.

OTHERS

Ultra light Motor Aircraft Pilot License

Vice President of C.D. Iruña from 2009 to present (Spanish Third Division Soccer Club)

ANNEX 1. PATENTS

Request Number Title Inventors Priority Date Cathegory Description

Modular blade joint based on metallic

Llorente Gonzalez, Jose Ignacio

1 EP 1 878 915 Blade for Wind Power Generators 07/04/2004 Structures plates joined to the spar caps by

Velez Oria, Sergio

means of shear bolts.

Blade tip to tower free distance

Llorente Gonzalez, Jose Ignacio

2 EP 1 584 817 Wind Turbine Blade 31/03/2005 Structures increase by means of an angle in the

Velez Oria, Sergio

blade intermediate joint.

Modular blade joint based on metallic

Llorente Gonzalez, Jose Ignacio

3 WO 200*-****** Split Blade for Wind Generators 28/10/2005 Structures fittings bonded to some spar caps

Velez Oria, Sergio

laminate cavities.

Blade design and manufacturing

Ricard Savio, Hely

based on a four panels spar (two

4 EP 1 965 074 A Wind Turbine Multi-Panel Blade Arocena de la Rúa, Ion 22/02/2007 Structures

caps and two webs), a leading edge

Sanz Pascual, Eneko

panel and two trailing edge panels.

Pedersen, Bent Herso

Flange joint for blade sections of a Arocena de la Rúa, Ion

5 EP 2 105 609 wind turbine with load sensors on the Rodríguez Sola, Rubén 14/09/2007 Instrumentation

bolts Sanz Pascual, Eneko Instrumentation of blade intermediate

Savii, Hely Ricardo j oints by bolts sensors.

Rodríguez Sola, Rubén

López-Amo Sainz, Manuel

Wind Turbine blade with a light beacon Light Beacon

6 EP 2 088 313 Arocena de la Rúa, Ion 08/02/2008

at the tip System

Erro Ibáñez, Miguel Angel Light beacon for blade tips based on

Sanz Pascual, Eneko a fiber optic system.

Sanz Pascual, Eneko Metallic insert for a blade

7 EP 2 138 716 Blade Insert Arocena de la Rúa, Ion 27/06/2008 Structures intermediate joint embedded into the

Arroz Collado, Sandra spar cap laminate.

Sanz Pascual, Eneko Double shear joint between a metallic

8 EP 2 138 715 Wind Turbine Blade Insert Arocena de la Rúa, Ion 27/06/2008 Structures fitting and a pultruded profile for a

Arroz Collado, Sandra blade intermediate joint.

Arocena de la Rúa, Ion Lightning

LIGHTNING PROTECTION SYSTEM FOR Lightning protection system of

9 EP 2 243 955 Candela Garolera, Anna 22/04/2009 Protection

SECTIONAL BLADES metallic parts of a blade intermediate

Sanz Pascual, Eneko System

joint based on a metallic fairing.

Blade root modification for clamping

Adaptación del root de la pala para Ion Arocena

10 WO 201*-******-**/01/2010 Structures devices in order to allow a vertical

permitir su montaje en vertical Eneko Sanz

erection of the blade.

Arocena de la Rúa, Ion

MODULO ELECTRÓNICO Y MÉTODO

Candela Garolera, Anna Light Beacon Light beacon system improvement by

11 EP 2 428 678 PARA EL BALIZADO DE LA PUNTA DE 14/09/2010

Sanz Pascual, Eneko System means of an energy battery in the

PALA

Pablo Sanchis Gurpide blade tip.

Inductive device in the carbon fiber to

Lightning conduction system for wind Lightning

Ion Arocena cable connection of a blade LPS in

12 EP 2 458 207 turbine blades with carbon fibre 30/11/2010 Protection

Eneko Sanz order to avoid high current between

laminates System

them.

DEVICE FOR REGULATING Sanz Pascual, Eneko

DEFORMATIONS OF THE BED OF A Pagola Divasson, Raquel

13 EP 2 457 707 GEOMETRICALLY AERODYNAMIC MOLD Iriarte Eleta, Javier 30/11/2010 Moulds

AND MOLDING METHOD WITH THIS Fuertes Thomas, Juan Jose Mechanical system for the geometric

DEVICE Arocena de la Rúa, Ion adjustment of blade moulds.

Sanz Pascual, Eneko

Arocena de la Rúa, Ion

Arroz Collado, Sandra

An improved wind turbine multi-panel

14 EP 2 492 497 Iñaki Hermosilla 24/02/2011 Structures

blade

Andoni Rosende Innoblade panels set up: four panels

Luis Mayor Moreno for inboard section and 2 L's for

Victor Isla outboard one.

Sanz Pascual, Eneko

Arocena de la Rúa, Ion

UN MÉTODO DE UNIÓN PARA UNA PALA Marín Martínez, Francisco Javier

15 EP 2 527 128 24/05/2011 Structures

DE AEROGENERADOR MULTINIVEL Zugasti Páramo, Amaia Semisolid adhesive use in the

Vélez Oria, Serbio bonding of composite panels of a

Rodríguez Saiz, Emilio blade structure.

Arocena de la Rúa, Ion

Sanz Pascual, Eneko Manufacturing concept of blades for

16 EP 2 543 875 Pala Adaptable en Longitud 06/07/2011 Structures

María García Fernandez Avilés adapting the blade length to the site

Aguilar Melendez, Raquel characteristics.

MANUFACTURING METHOD OF A Manufacturing method of modular

Arocena de la Rúa, Ion

17 P 2012 00351 COMPONENT OF A SPLIT BLADE OF A 03/04/2012 Process blades where the intermediate joint

Sanz Pascual, Eneko

WIND TURBINE elements are premanufactured

before its integration in the spar cap.

Gamez Gil, Javier

Arocena de la Rúa, Ion

BANCO Y MÉTODO DE ENSAYOS Carnicero Urra, Roberto Test bench and method of multiple

18 P 2012 00762 DINÁMICOS Y ESTÁTICOS DE Mendía Villamil, Mikel 25/07/2012 Testing coupons bonded to the central beam,

ESPECÍMENES Sanz Pascual, Eneko which allows a high test time

Mayor Moreno, Luis Alberto reduction and increase the loading

Arroz Collado, Sandra capability.

ANNEX 2. COMPLEMENTARY EDUCATION

Nov. 1996: Word 6.0, Excel 5.0, Access 2.0 in EYSER (81 h)

Dec. 1997: Nuclear Reactors of Pressed Water in the UPNA (20 h)

Sept. 1998: AutoCad v14 in IFES-UGT (200 h)

May 2000: Catia v4.2 in the UPNA (60 h)

May 2001: Structural Analysis by FEM, Patran–Nastran, in Gamesa (40 h)

Sept. 2002: Structural Analysis by FEM, Abaqus, in Gamesa (20 h)

May 2003: Structural Analysis of Blades, Focus, in the Delft Univ. (20 h)

Oct. 2003: Advanced Surface Engineering, in AIN (20 h)

Nov. 2003: Innovation Management, in Foro Europeo (40 h)

Nov. 2003: Failure Modes and Effects Analysis (FMEA), in Gamesa (8 h).

Mar. 2004. Project Management, in Gamesa (20 h).

Oct. 2004. Catia V5 for project managers, CADTECH (25 h).

Nov. 2004. Management of High Quality Working Teams, SINERGOS (25 h).

May 2005. Concurrent Engineering, FORO EUROPEO (15 h).

Jan. 2007. Microsoft VBA Excel, ESINA (24.5 h)

Oct. 2008. Leadership and Team Working, in Gamesa (15 h).

Feb. - Jun. 2009. Postgraduate of Organization, Production Engineering and Direction of

Industrial Facilities, CÁMARA NAVARRA (160 h)

Nov. 2009. Results Obtaining, in Gamesa University (16 h).

Nov. 2010. The keys of the effective negotiation, in Gamesa University (16 h).

Nov. 2011. Results Orientation, in Gamesa University (16 h).

Contact this candidate