Dr. Susan Murray, P.E.Associate Professor - Engineering Management Department
University of
Missouri - Rolla
Rolla, MO 65409-0370
Phone 573-***-****
Fax (573)
EMail: abqdck@r.postjobfree.com
EDUCATION:
Doctor of Philosophy, Industrial Engineering, Texas A&M
University, 1994.
Dissertation: Development of a
Systematic Approach to Selection and Application of Work Measurement
Methodologies in High Technology
Environments.
Master of Science, Industrial Engineering, University of Texas at Arlington,
1988.
Bachelor of Science, Industrial Engineering, Texas A&M University, 1985.
ACADEMIC AND INDUSTRIAL EXPERIENCE:2000 to Present Associate Professor - Engineering Management Department, University of
Missouri-Rolla, Rolla, Missouri.
Teaching courses including work
measurement, ergonomics, safety engineering, human factors, and project
management. Conducting research in human performance, productivity
improvement, manufacturing, technology transfer, work design, and
engineering education.
2000
to 2003Director - Lemay Center for Composites
Technology, St. Louis, Missouri
Managing university technology transfer
and training center. Supervised employees, managed budgets, developed
strategic plans, and assisted in incubating companies.
1994 to 2000
Assistant Professor - Engineering Management Department, University of
Missouri-Rolla, Rolla, Missouri.
Teaching traditional industrial
engineering courses including work measurement, ergonomics, safety
engineering, and project management. Conducting research in human
performance, productivity improvement, work measurement, plant layout, and
engineering education.
1992 to 1994
Research Associate - Industrial Engineering and Management Systems,
University of Central Florida, Orlando, Florida.
Researched application
of work measurement, methods analysis, ergonomics, and computer simulation
to improve effectiveness of NASA's Space Shuttle ground
processing.
1990 to 1992
Lecturer - Department of Industrial Engineering, Texas A&M
University, College Station, Texas.
Taught work measurement and
ergonomics. Revised work measurement and ergonomics course curriculum and
laboratory manual.
1985 to 1990
Lead Industrial Engineer - LTV Aerospace and Defense Corp.,Dallas,
Texas.
Supervised several industrial engineers supporting aircraft
assembly operations. Established time standards, manpower forecasts, cost
reporting and analysis system, plant layouts, and methods improvements.
EXPERT WITNESS:
Miller vs. PYA/Monarch
- Expert in a personal injury case involving an industrial fall. Provided
assistance during evidence collection. (August 2001)
Thornton vs. Bennett
Expert in personal injury case involving forklift safety. Researched
government regulations, industry practice, and forklift designs, provided
expert testimony on case. (September 1999)
Schrader vs. Allco
Expert in personal injury case involving dock plate and forklift safety.
Researched government regulations and product design. Provided expert
testimony on case. (February 1999)
Eliker vs. Roswil, Inc.
Provided expertise for a slip and fall injury case. (January 1999)
RESEARCH:
Funded Research
Grants
"Time Standards for Safety Engineering Applications." UM
Research Board. May 1999-May 2000.
"Human Factors and Ergonomics Program Development." Manufacturing Education
Mission Enhancement Program. January 1999-December 1999.
"Rapid Response for Missouri Manufacturing Productivity Improvement." MAMTC.
August 1998-May 1999.
"Human Factors Applications on CLCS." NASA/ASEE Summer Faculty Fellowship
Program. June 1998-August 1998.
"Methods Analysis of Clemco Manufacturing Operations." Clemco Industries and
Manufacturing Research and Training Center. November 1996-August 1997.
"Application of Work Measurement Techniques to Safety Engineering." Oak Ridge
Associated Universities. June 1996-May 1997.
"Project Management Training Program." Missouri Highway and Transportation
Department. November 1995-March 1996.
"The Application of Methods Analysis and Work Measurement to Leaf Spring
Manufacturing Operations." Transportation Specialists, Inc. and Manufacturing
Research and Training Center. January 1995-August 1995.
"Industrial Engineering Productivity Prototype Research." National
Aeronautics and Space Administration (NASA) - Kennedy Space Center.
GRADUATE STUDENT ADVISED:
Paul Hirtz, Ph.D.,
Effective Leadership for Quality Management, May 2002. (Ph.D.)
Pirun Hemmondharop,
A comparative study of Just-In-Time (JIT) and Theory of Constraints (TOC)
systems with varying constraint locations and operational characteristics,
May 2002. (Ph.D.)
Rhonda Turvey, The Effects
of Leadership Style on Total Quality Management Implementation, May 1999.
(Ph.D.)
Alice Beechner, Total Quality Management and Corporate Financial Performance:
A Trend Analysis, December 1998. (Ph.D.)
Rose Marie Evans, The Effectiveness of Internet-based Technology in
Engineering Education, December 1998. (Ph.D.)
Earl Evans, Asynchronous Distance Learning Technology: The Instructor's
Perspective, December 1997. (M.S)
Gul Okudan, Ph.D., Developing a Performance Measure for Selection of
Dispatching Rules to Gain Time-Based Advantage in a Dynamic Job Shop: A
Simulation Study, December 1997. (Ph.D.)
Siwiga Pattanapanchai, A Comparative Study of Multi-Attribute Decision Making
Techniques in Facility Location, May 1997. (Ph.D.)
Neslihan Alp, Modeling Technology Acquisition and Utilization in
Manufacturing: A Comparative Case Study, December 1996. (Ph.D.)
Steve Dusseau, An Analysis of the Relationship Between Financial Performance
and Total Quality Management Implementation, December 1996. (Ph.D.)
Adik Soedarsono, An Analysis of Productivity Improvement at an Indonesian
State-Owned Industry, May 1996. (Ph.D.)
PUBLICATIONS:
Refereed
Publications:
"Comparison of MRP
(Material Requirement Planning), JIT (Just-In-Time), and TOC (Theory of
Constraints)," Engineering Management Journal (accepted pending
revisions). Hemmondharop, P. and Murray, S.
"Financial Viability of
Fiber-Reinforced Polymer (FRP) Bridges," Journal of Management in
Engineering, (accepted). Nystrom, H.; Watkins, S.; Nanni, A.; and Murray,
S.
Addressing Gender Issues in the Engineering Classroom, Feminist Teacher,Vol.
12, December 2000, pp. 169-183. Murray, S.; Meinholdt, C.; and Bergmann, L.
Effectiveness of An Internet-Based Graduate Engineering Management Course,
Journal of Engineering Education, January 2000. Evans, R.; Murray, S.;
Daily, M.; and Hall, R.
Safety Education by Design Professional Safety, Journal of the American
Society of Safety Engineers, October 1999, pp.30-35. Hirtz, P. and Murray,
S.
Why Aren t There More Women Engineers? Journal of Women and Minorities in
Science and
Engineering,
Vol. 5 No. 3, October 1999, pp. 239-263. Meinholdt, C. and Murray, S.
If I Knew
Then What I Know Now: A Portable Mentor for Women Beginning Professorial
Careers in Science and Engineering, Journal of Women and Minorities in
Science and Engineering, Vol. 5 No. 1, January 1999, pp. 29-52. Riordan,
C.; Manning, L.; Daniel, A.; Murray, S.; Thompson, P.; and Cummins, E.
A
Study in Productivity Improvement Programs at Indonesian State-Owned
Industries, IEEE Transactions on Engineering Management, Vol. 45 No.
4, November 1998, pp. 388-395. Soedarsono, A.; Murray, S.; and Omurtag, Y.
Other Refereed Publications:
"Work Measurement
at NASA's Kennedy Space Center," Industrial Engineering, July 1995. Murray, S.;
Mitskevich, A.; and Safford, R.
"Adaptation of Work Measurement for the Shuttle Processing Environment,"
Research and Technology 1994 Annual Report, John F. Kennedy Space Center, NASA
Technical Memorandum 110143. Mitskevich, A.: Murray, S.; and Safford, R.
TEACHING:
Courses Taught at University of Missouri
- Rolla:
EMgt 301 - Industrial Systems Simulation
Emgt 311 /
Psych 311 - Human Factors
EMgt 361 - Project Management
EMgt 380 - Work
Design
EMgt 382 - Methods of Industrial Engineering (Operation
Research)
EMgt 386 - Safety Engineering Management
Courses
Taught via Distance Education:
EMgt 361 - Project Management
EMgt 380 - Work Design
Courses Taught at
University of Missouri - Rolla's Ft. Wood Program:
EMgt 386 -
Safety Engineering Management
Courses Taught at
University of Missouri - Rolla's St. Louis Programs:
EMgt 361 - Project Management
EMgt 386 -
Safety Engineering Management
Courses Taught at Texas A&M
University:
IE 304 - Work Measurement, Methods Analysis, and
Ergonomics
IE 416 - Plant Layout and Location
laboratory
Courses Developed at University of Missouri -
Rolla:
EMgt 301 - Industrial Systems Simulation
EMgt 311 -
Human Factors
EMgt 380 - Work Design
EMgt 386 - Safety Engineering
Management
SELECTED AWARDS:
UMR's Woman of the Year (2000)
NASA Summer
Faculty Fellowship (1998)
MSM-UMR Alumni Excellence in Teaching Award
(1996)
UMR Outstanding Teaching Award (1995-1996, 1997-1998,
1998-1999)
John F. Kennedy Space Center Group Achievement Award
(1995)
McDonald's Teaching Excellence Award (1993)
U.S. Department of
Education Fellowship (1991-1994)
LTV Doctoral Fellowship
(1990-1994)
Outstanding Performer Award - LTV Aircraft Products Group (1989)
CERTIFICATION:
Professional Engineer, State of Texas,
Certificate No. 71830
MOST/MAXI-MOST Predetermined Time Standard System
Certification
MODAPTS Predetermined Time Standard System Certification
SERVICE ACTIVITIES:
Professional
Service:
Board of Directors- International MODAPTS
Association (1996-Present)
Chair - American Society for Engineering
Education, Engineering Management Division (1999-2000)
Faculty Advisor
- Society of Manufacturing Engineers (1994 - 1997)
Faculty Advisor -
Association of Professional Societies (1996 - 2000)
Faculty Advisor -
Society of Women Engineers (2000 - Present)
Conference Co-Chair - 1996
MODAPTS Symposium, Cocoa Beach, Florida
Editor - 1995 MODAPTS
Symposium Proceedings, Cocoa Beach, Florida
Program Chair - American
Society for Engineering Education, Engineering Management Division
(1998-1999)
Treasurer - American Society for Engineering Education,
Engineering Management Division (1997-1998)
Newsletter Editor -
American Society for Engineering Education, Engineering Management Division
(1996-1997)
University of Missouri - Rolla Service:
Freshman Advisor - Freshman Engineering Program (1995-1999)
Academic
Council Representative (1995-2000)
Chair of the Student Financial Aid
Committee (1996-2000)
Career Opportunities Center Advisory Board Member
(1996-2000)
Out-of-Department Masters Student Committees
(1994-Present)
Member of Campus Safety Committee (1996-Present)
Member of
the Women's Committee (1997- Present)
Member of the Student Financial Aid
Committee (1995-2000)
Coordinator of Female Faculty Luncheon Series
(1996-2000)
Society of Women Engineers' Scholarship Committee Member
(1996-Present)
Instructor in Student Success Academic Workshop
(1997)
Member of Director of Admissions Search Committee
(1997)
Participant on KUMR's Major Miners Program (1997)
Coordinated the
Porth Lecture Series Presentation of Ralph Nader (1996)
Departmental Service:
Member of twenty
in-department doctoral committees (1994-Present)
Member of two hundred in-department masters committees (Non-thesis option)
Member of the EMgt Graduate Committee (1995-Present)
Member of the EMgt
Research Advisory Committee (1996-Present)
Member of the EMgt Spring Open
House Committee (1995-Present)
Member of the EMgt Women in Engineering
Committee (1994-Present)
Member of the EMgt Mentoring Committee
(1996-Present)
PROFESSIONAL MEMBERSHIPS:
American
Society for Engineering Education
American Society of Safety
Engineers
Human
Factors and Ergonomics Society
Institute of Industrial Engineers
International MODAPTS
Association
Society of Manufacturing Engineers
Society of Women Engineers
Back to: Dr. Murray's Home
Page