Curriculum Vitae
Discipline: Lead E & I Inspector/Field
Engineer
Name : Cho Siew Hee
Date of Birth : 09.June.1961 Age: 52
Status : Married
Contact tel. : +86-186*-****-*** currently
in use
+601*-****-*** h/phone ( Malaysia )
Nationality : Malaysian Chinese
Language : Fluent in English, B.Malaysia, and Mandarin
E-mail : i) abonno@r.postjobfree.com
ii) abonno@r.postjobfree.com
Computer Literacy : Microsoft WinWord, Excel, Access, etc
Academic : Malaysia Certificate of Education - 'O' Levels
Technical : Diploma in Instrumentation- Industrial Technology
Experience Summary :
1. Over 27 years of experience in Electrical/Instrument related
construction activities in Oil/Gas facilities on/offshore, FPSO's, DP3
Pipe-Laying Vessels, Semi-Submersible Drilling Rigs, Platforms/Modules
fabrication, Paper-Mills, Refineries/Chemical plants, Hi-Tech Clean-
Room/Wafer plants, etc
2. Assignments includes as an Lead E/I inspector, Field Engr in various
high profile and demanding projects, providing a strong technical
knowledge and expertise, performing responsibilities, liaise with project
management team, contractors, systems vendors and engineering
consultants, reports to Project/Constr Manager.
3. Familiar and ability to perform within project schedules, datelines,
ensures all related Instr/elect activities conforms to P&ID and M&E
drawings, codes, specifications and technical requirements in Oil/Gas
industries, Maritime Classification (ABS, Lloyds, DNV, etc), Hi-Tech
Codes etc.
4. Assist in commissioning of Power Generation, Management and Distribution
systems, Process and Control Instrumentation, Tele-Communications, CCTV,
F&G systems, Vessel Management systems, DCS/PLC controls, Life Safety &
Security systems, Plant Start-up and test runs, FMEA tests, Sea Trials,
etc
Construction, Inspection and Commissioning activities such as:
1. Conduct inspection on elect/instr installations such as Small
Power/lightings, HV/LV cabling/ ladders/trays, Motors and DB panels,
FAT's, Fire/Gas Detection, Heat tracing system, VFD's, MCC/LV switchgear
panels, Diesel/Emer generator, UPS system, Charger battery banks, CO2
System, Gen HVAC system, Earthing/Grounding system, Cathodic Anti-growth
system, Fire Damper Controls, etc
2. Commissioning/equipment functional testing, torque test & IR test on LV
eqpt. MCC/DB and motors, cabling IR test and loop checks, functions
checks on eqpt controls, Emer Stop & HOA, etc.
3. Pre-Comm checks, cold/hot loop checks of instruments and controls for
Marine systems such as Bilge/Ballasting, Fresh/Seawater, Fuel Oil, Hvac,
Compressed Air, Motorized and Hydraulics Valves Controls, Thruster
Controls, etc
4. Inspection and testing of instr process/monitoring devices, tank radar
system, CCTV, LSS, Fire/Gas Detection system, FMCS and SCADA functions,
PLC and Marshalling panels, Navigation/Aviation warning, DCS panel,
Paging/public address system, Process transmitters, gauges and switches,
tubing leak test, etc.
5. Review and conduct site inspections to ensure fabrication, installations
are as per specifications. Resolves and clarify technical queries.
Acceptance/verification of material delivery, system turnover package, as-
built drawings, handover of Acceptance Reports and documentation.
July.2012~Current.2013
Position held: ELECT/INSTR SUPT
Assignment: CAMERON PROCESS SYSTEMS ( MeG Module )
Project: LIWAN 3-1 DeepWater Gas Field
COOEC/QingDao Yard, China
i) Responsible for all elect & instr installations for fabrication of
a Mono-Ethylene Glycol module.
ii) Review P&ID's and liaise with Yard Engineering to ensure all
procurement, installations are in accordance to project
specifications.
iii) Conducts inspections on E/I installations and material deliveries,
resolves clashes, coordination of interfacing activities..
iv) Clarifications of technical queries, and verifications of
modifications and site changes
v) Lead interface between vendors, package systems and coordination
between Construction/Inspections & Commissioning Team.
Feb.2011~June.2012
Position held: LEAD E/I INSPECTOR
Assignment: PETROFAC LLC
Project: FPSO BERANTAI
Keppel Tuas Shipyard, Singapore
i) Review Insp and Test Plan, Construction and Hook-Up drawings,
Electrical Standard Installation Practise
ii) Attends Vessel Construction/Integration/QaQc meeting to discuss
progress, resolves construction and quality issues
iii) Conducted material delivery inspections, attends FAT inspections, site
installations and mechanical completion inspections.
iv) Coordinates and initiate vendor call-outs for site completion,
assembly and pre-commissioning of vendor equipment, switchboards,
skids packages.
v) Review yards progress, feedback construction queries and conflicts to
engineering, ensure proper work coordination between trades.
Aug.~Nov.2010
Position held: INSTR COMMISSIONING
Assignment: MASTER MARINE (NORWAY)
Projects: L205 HAVEN, Jack-Up Rig Project
AS Nymo Yard, Eydehavn, Norway 2010
i) Conduct Pre-comm inspections as per PID and Mechanical Completion
Scope. Verification on instrument installations are as layout, detail
hook-ups and process requirements. Generate punch-lists on
discrepancies and incomplete tasks. Verify insulation resistance and
continuity tests on cablings.
ii) Verify cold and hot loop checks on cables, instr calibration, testing
to Field stations, marshalling cabinets Valve Control cabinets, and
verification of loops to Engine Control Room Vessel Management System.
iii) Testing of Fire and Gas devices and loops tests to confirm
functionality, alarms and settings.
iv) Mark-up As-Built single line drawings, loop drawings changes, verify
VMS graphics changes and site changes.
Dec.2009~June.2010
Position held: ELECT/INSTR INSPECTOR
Assignment: NOBLE DRILLING SERVICES
Projects: NOBLE JIM DAY Semi-Submersible DP3 Drill Rig
Project JSL, Singapore 2010
i) Verifications and Inspections of Electrical and Instrumentation
installations, ITRs' inspections, resolving site issues, liaise with
engineering on site clashes, package interfaces, design conflicts,
shortages, etc
ii) Ensure work compliance to class rules and regulations,
installations compliance to hazardous zones, etc.
iii) Monitor shipyard progress, quality works, site changes, coordinate
material movements, etc.
iv) Responsible for Thruster Controls, Ballast Controls System, Bilge, Bulk
Storage System, Mud Jetting Systems, etc
v) Liaise with project engineer and design engineering on resolving of
equipment shortages, damages, non-conformance issues, site
instructions. Reports to Construction Manager on progress, site issues
and interfacing issues, etc.
Nov.2007~Sept.2009
Position held: E&I SENIOR SUPERVISOR
Assignment: BLUEWATER ENERGY SERVICES B.V. ( FPSO Projects )
Projects:
4) SYMS-FPSO PengBo (Hook-Up & Commissioning) Bohai Phase2 Offshore
China Sept.2009 3) Aoka Mizu
FPSO (Commissioning ) Keppel Verolme Yard, Rotterdam, Netherlands
Apr.2009
2) BlackTip CALM BUOY Project Britoil Offshore Yard,
Batam, Indonesia Jan.2009
1) SYMS Soft Yoke Mooring System Chiwan-Sembawang Yard, Shenzhen,
China Sept.2008
i) Inspections and on-shore commissioning of all electrical and instrument
equipment, electrical switchboard, Fire and gas systems, electro-
hydraulics system on SYMS Structure during construction stages in
Shenzhen, Chiwan-Sembawang yard, China
ii) FAT, installation and commissioning of Solar Power system, Subsea PLEM
Hydraulic power pack system on BlackTip Calm Buoy Project in Batam,
Indonesia. Mark-up as-built and final compilation of installations
documentation.
iii) Mark-up, as-built of loops and verification of Trace Heating
installations, Small power and Lightings system on topsides modules on
Aoka Mizu FPSO in Keppel Verolme yard, Rotterdam, Netherlands
iv) Oversee tie-in and hook-up of all electrical, Instrument, Fire and Gas
system during the offshore Hook-Up stages for the SYMS-PengBo FPSO in
Bohai Bay, offshore China
v) Monitor, coordinate and close-out completion of
electrical/instrument/piping workpacks reports.
Aug.2006~Nov.2007
Position held: ELECT/INSTR INSPECTOR
Assignment: Qa/Qc Dept ( Projects Div. )
SSPL Yard, Singapore
Project:
2) Sapura-Crest 3000T DP Class.2 Derrick Pipelay Vessel,
SSPL, Singapore Nov.2007
1) Discovery 534 - Transocean Drillship Refurbishment/Upgrade, SSPL,
Singapore Mar.2007
i) Inspections of all electrical/instrumentation/F&G system installations,
cables glanding and terminations, cable trays layouts, etc
ii) Verification of cabling loops, insulation resistance checks, from field
to Field Stations, Eng Control Room, switchboard rooms, etc
June.2005 ~ May.2006
Position held: Elect/Instr Field Supt
Assignment: FLUOR DANIEL EASTERN INC. (USA)
Project: Corning Display Technologies Taichung Hi-Tech Plant, Taiwan
ROC May.2006
i) Responsible for Plant and Equipment controls and monitoring systems,
grounding systems, Power distribution to Finishing Assembly Lines and
Office buildings, Buildings GHVAC system, etc for the constructionof a
Hi-Tech Plant.
ii) Overseeing of Lightings and Un-interrupt Power Supply systems, Security
and Communications system.
iii) Pre-commissioning, trouble-shootong and and start-up of above systems
from field installation to Plant FMCS system.
Feb.2001 ~ June.2005
Position Held: Senior Elect/Instr QC Inspector
(Contracted to... *as below )
Assignment: 1. SaiBos/Technip @ Sime Darby Engineering
Johor, Malaysia
2. QaQc Dept @ Sembawang Shipyard
Singapore
3. QaQc Dept @ SembCrop Maritime and Offshore Engr.
Singapore
Projects:
vii) AMENAM Module Compression Module Integration Nigeria
Feb.2005
vi) ERHA FPSO FPSO Exxon Mobil Nigeria
Oct.2004
v) CNOOC 114 FSO FSO China National Oil Corp
Aug.2004
iv) JASCON-5 DP3 Pipe Laying Vessel Consolidated
Project Limited May.2003
iii) SAIPEM 3000 DP3 -2400T Heavy Lift Vessel Conversion
SAIPEM Aug.2002
ii) SEA EAGLE FPSO FPSO Shell
Exploration Nov.2001
i) SHELL SOORSCH FSU FSU Shell Exploration
Feb.2001
Feb 2000 ~ Feb 2001
Position Held: Instrument Field Supt
Assignment: Fluor Daniel International Malaysia ( FDIM )
Location: Kulim Hi-Tech Indust. Park, Kedah Malaysia
Project: SILTERRA Silicon Wafer Hi-Tech Plant,
. Responsible for all instrumentation installation activities under
Facility Monitering and Controls System, Life Safety and General HVAC
system.
. Seconded to Testing & Commissioning Team during the Start-
up/Commissioning period.
. Seconded to Facilities Maintenance Team for three months,
as part of Reliability Team after Start-Up.
June 99 ~ Feb 2000
Position Held: Elect/Instr. Supt
Assignment: AGRA-BIRWELCO ENGINEERING ( USA )
Location: Malaysia Shipyard and Engineering. Johor.
Malaysia
Projects: 1. TRANSFER LIGHT EXCHANGERS Furnaces Units A ~ D
2. QUENCH HEADER Furnaces Units E ~ H, Singapore Olefins
Furnace Project
Mar 98 ~ June 99
Position Held: Senior Instr/Elect Supv
Assignment: STORK COMPRIMO CONSULTANCY (Malaysia)
Project: MALAYSIAN NEWSPRINT INDUST. RECYCLED PAPER
MILL
Location: Mentakab, Pahang Malaysia
. Overall in charge of all instr/elect installations in Raw Water and
Effluent Treatment Plant, Stock Preparation Sector, Recovery Paper
Warehouse and Water Intake Station
. Assist in plant commissioning checks from field to DCS control room.
. Attached to the MNI Maintenance/Facilities Dept after the successfully
start-up, for reliability period and operation of Plant.
Sept 97 ~ Mar 98
Position Held: Instr & Elect Project Supt
Assignment: Project Management Team
Location: Promet Fabricators Sdn. Bhd. Teluk
Rumania, Johore, Malaysia
Project: STJT-A SOTONG TOPSIDES PLATFORM PETRONAS - CARIGALI
Project
0ct 94 ~ August 97
Position Held: Elect & Instr QC Inspector
Assignment: Qa/Qc Dept @ Sembawang Project Conversion Team
Location: Sembawang Shipyard Ltd. S'pore
Projects:
1. LU FENG 22-1 Self-Assembly Modules Project
CNOOC 1997
2. SUPERSTAR GEMINI Cruise liner - Retrofit/Refurbishment
S'PORE 1997
3. TANTAWAN EXPLORER FPSO - SINGLE BUOY MOORING
1996
4. PROSTAR FSO II FSO - SINGLE BUOY MOORING
1996
5. KARIMUN DOCK 210,000 TLC floating dock
INDONESIA 1995
6. SOLITAIRE DP Pipelaying Vessel Conversion ALLSEAS
1994
June 93 ~ Sept 94
Position Held: Instr & Elect QC Inspector
Assignment: Qa/Qc Dept @ MSE Project Management Team
Location: Malaysia Shipyard and Engr.
P.Gudang. Johor, Malaysia
Projects: 1. D-35 PLATFORM - Compression and Power Generation Modules
SHELL Project
2. GUNTUNG 'D' PLATFORM - Compression and MSF Modules
EPMI Project
Feb ~ June 93
Position Held: Senior I & E Commissioning Technician
Assignment: TPC/TPE Facilities & Maintenance Dept
Project: TITAN PETRO-CHEMICAL & POLYETHYLENE Plant (
Phase II )
Location: P.Gudang. Johor Malaysia
April ~ Dec 92
Position Held: E & I Quality Control Inspector.
Assignment: Qa/Qc Dept @ MSE Project Management Team
Location: M'sia Shipyard and Engr. P.Gudang. Johor, Malaysia
Projects:
1. BAYAN BYR-A Riser Platform
SSB Project
2. SELEGI-C, SELEGI-E MSF Platform
EPMI Project
3. TABU-B TOPSIDE Production Platform
EPMI Project
1981 ~ 1992
Position Held: Instr/Elect Hook-up Leadman/Technician
Assignment: under contract to as below
1. Wescon ( Asia ) Pte Ltd - On/Offshore Hook-Up and
Commissioning
2. Comex Offshore -
Retrofit/Refurbishment
3. Shapadu Offshore -
Retrofit/Refurbishment
4. IES Enterprise - Offshore
Hook-Up and Commissioning
5. Hyundai Construction - Expansion of Pertamina
Terminal, Indonesia
Projects:
1. SLUDGE CATCHER Project, T'ganu Crude Oil Terminal
Kertih. Trengganu
2. TEK-A GasLift Platform .SSB
On/Offshore East M'sia
3. SSB platforms Hook-Up, Retrofit/Refurbisht
Sabah, East M'sia
4. EMPI platforms Hook-Up, Retrofit
Offshore Trengganu
5. TRENGGANU Crude Oil Terminal Parker Retrofit Team
Onshore Trengganu
6. PROMET Fabrication Yard DeepSea Semi-Submersible Rig
Singapore
7. MARATHON LeTourneau Fab Yard Rig Fabrication
Singapore
8. PERTAMINA - DUMAI Terminal Hydro-Cracking Terminal
Sumatra, Indonesia
. Loop-checks and testing of pneumatic, electronic and electrical
instruments of skid packages installations such as Gas Receiving Skid,
Process and Gas Metering skid to Central Control Room at Sludge Catcher
project -
Kertih. Trengganu
. Servicing and retrofit of process and control instruments, tubing works
on local control panels, Deluge, pneumatic shutdown panels, etc on EPMI
platforms - Offshore
Trengganu
. Calibrate, functional testing, troubleshoot, servicing of
instruments, on Gaslift platforms SSB projects under EPO contract -
Offshore East
Malaysia
. Onshore hook-up of tubing works, loop checking, functional test
instr process and controls system,
fire and gas alarms functions on SSB platforms -
Labuan Shipyard, Sabah. East Malaysia
. Retrofit, servicing and upgrading of instr installations, tubing
hookup offshore SSB platforms on shutdown projects -
Offshore East Malaysia
. Hook-up, functional testing, loop checking of instr loops and
pneumatic control panels on TEK-A GASLIFT Compression platform, SSB
project -
Offshore East Malaysia
. Elect/instr equipment, tray works, supports installations in the
construction of Oil rigs. - Singapore
. Utilities, process piping and associated installation works in hydro-
cracking project. - Indonesia
TRAINING & SEMINARS ATTENDED
. Aug 2010 HSE/ISPS Course
AS Nymo, Eydehavn, Norway
. Apr 2009 COPC - MTS / Permit To Work Compliance
ConocoPhillips, China
. Mar 2009 Bluewater (BES) Permit To Work-Level 2 Compliance
Cresent Aberdeen, Netherlands
. Sep 2008 B.O.S.S & H.U.E.T Offshore Course COOOSO,
China
. Dec 2007 Cultural Awareness Workshop Bluewater
Energy Services BV
. Sep 2005 Electrical Awareness & Safety Course Fluor
Daniel Eastern Div ( USA)
. May 2005 Industry Confined Space Awareness MSTS
Asia Sdn Bhd (M'sia)
. Jun 2000 Clean Room Protocol Level 1~5 Fluor
Daniel International. Malaysia
. Nov 1997 Professional Accident Investigation Course
M.S.O.S.H. (Promet Fabricators )
. May 1995 ISO 9000 Introduction Course
Sembawang Shipyard (S'pore)
. Mar 1993 Petro-Chemical Plant Safety Course Titan
Petro-Chemical
. Dec 1992 Understanding & Implementation of ISO 9000 QMS
Neville Clarke
. Jan 1991 Testing Equipment & Calibration Training
M'sia Shipyard & Engr
. Sep 1988 Swagelok Valves & Tubings Safety Seminar
KL Valves & Fittings
. Apr 1988 Offshore Sea Survivor Training Course Miri
SMTC
. Jun 1985 Shipyard Safety Instruction Course Certificate
Singapore
. July 1981 Shipyard Fire and Safety Watch Course Jurong
Shipyard
. May 1981 Shipyard Apprentice Training Course Jurong
Shipyard Pte Ltd
REFERENCES:
Name : Mr. KC Lim
Position: Construction Manager,
Company: Noble Drilling Services ( USA)
Project: Noble Jim Day DP3 Semi-Submersible Drilling Rig
Location: Jurong Shipyard, Singapore
Period: Dec.2009 ~ June.2010
e-mail: abonno@r.postjobfree.com, abonno@r.postjobfree.com
Name : Mr. Bruno Ban
Position: Commissioning Manager
Company: Bluewater Energy Services ( Netherlands )
Project: FPSO Soft Yoke Mooring Systems. ( Bohai Project Ph.2 )
Location: Chiwan-Sembawang Fabrication Yard, Shekou, Shenzhen. CHINA
Period: Nov.2007~ Sept.2009
e-mail: abonno@r.postjobfree.com, abonno@r.postjobfree.com
[pic]