Project Engineer
Resume:
CURRICULUM VITAE
[pic]
PERSONAL DATA
Name : RENANTE E. ROSAL
Permanent Address : 657 Cupin Compound, 8600 Butuan City,
Philippines
Phone : Phone: Qatar +974******** / Phil.
e-mail address : ab3wky@r.postjobfree.com &
ab3wky@r.postjobfree.com
Nationality : Filipino
Date of Birth : May 3, 1971
EDUCATIONAL QUALIFICATION:
Bachelor of Science in Electronic & Communication Engineering (B.S.ECE)
Cebu Institute of Technology, Cebu City, Philippines - (1988-1993)
PROFESSIONAL TRAINING COURSE:
ISO 9000:2000 - Internal Quality System Auditor Training Course (IQSA)
Cert. no.: SGS/ICS/IA2/550070/P, 8634 - IRCA UK Registered, Conducted by
SGS Inspection Services, Dammam, K.S.A.
PROFESSIONAL MEMBERSHIP:
. Member of Instrument Society of America (ISA) - (Member I.D. #
32969496)
. Member of Institute of Electrical and Electronics Engineers (IEEE) -
(Member I.D. # 90433531)
. Member of Integrated Electronic and Communication Engineers of the
Philippines (IECEP)
OTHER CERTIFICATION, QUALIFICATION & TRAINING:
. ARAMCO Approved QA/QC Engineer/Supervisor/Inspector (Electrical,
Instrumentation & Telecom)
. ARAMCO Approved Vendor Inspector (Vendor Inspection I.D. no.:
70002617)
. QATARGAS Approved QA/QC Project Inspector and Vendor Inspector
. GASCO Approved QA/QC Project Inspector and Vendor Inspector
. ADGAS Approved QA/QC Project Inspector and Vendor Inspector
. Obtained Certificate of Safety Achievement as best TPIT Instrument
Supervisor GTL-Complex, QATAR
. Safety Induction Training Course conducted in ABV Rock Group KB, Site
5, Jeddah, K.S.A.
. Gas-In awareness seminar conducted by ORYX GTL, Ras Laffan Industrial,
QATAR
. LNG awareness seminar conducted by YLNG Management Team, Balhaf, YEMEN
. WORMALD System Sensor "Fire Detection & Alarm System (Fire, Heat &
Smoke) Seminar, Alkhobar, KSA
. GENERAL MONITORS "Gas Detection System (H2S & LEL) Seminar, Howtat
Sudair, KS.A.
. GENERAL DYNAMIC Telecom. Premises Distribution System (PDS) Seminar,
Haradh, K.S.A
. FAFCO's In-house training of FIBER OPTIC splicing and testing using
OTDR (Tektronix Model TFP2A), Arc Fusion Splicing Machine (Fugikura
Model FSM-30S) and Power Meter (Datacom).
. Holder of Valid Driving License: (U.A.E. - LN:558639, QATAR -
LN:271********)
SUMMARY OF EXPERIENCE:
18+ years of extensive experience in QA/QC OIL & GAS industries involving
Engineering, Construction and Pre-Commissioning. The comprehensive
experience includes management and supervision of all on-site Electrical,
Instrumentation and Telecommunication engineering related activities and
close liaison between contractors, Clients and Local authorities. Worked in
project of QATARGAS-Qatar, KNS-NC, ADGAS-U.A.E., YLNG-Yemen, GASCO-U.A.E,
MDE Gas Plant-U.A.E., ORYX GTL-Qatar, MODA-K.S.A., SCECO-K.S.A. and various
projects of ARAMCO-K.S.A
This has encompassed the direction of multi-disciplined, multi-national
project, engineering and construction team through all phases of project
execution. A consistent level of success has been achieved through proven
application of effective knowledge in the Quality Assurance and Quality
Control, leadership organization and interpersonal and excellent
communication skills toward objectives of the projects and contracts.
EXPERIENCE DETAILS:
1. Company : JV of TECHNIP & CHIYODA (TCJV)
Client : QATARGAS - Qatar
Project : LTC/PMP/215/09 - LNG Plateau Maintenance Project
Duration : Oct. 2011 to Jun. 2013
Position : QAQC Engineer/Inspector (Electrical & Instrument)
2. Company : JV of TECHNIP & HATCH (THJV)
Client : XSTRATA - New Caledonia
Project : Koniambo Nickel Project - Vavoutto, New Caledonia.
Duration : Sep. 2010 to Aug 2011
Position : QAQC Engineer/Inspector (Electrical & Instrument)
3. Company : TECHNIP
Client : ADGAS - U.A.E.
Project : LNG Offshore Associated Gas Phase 1 (OAG1) Project, Das
Island, U.A.E.
Duration : Nov. 2009 to Aug. 2010
Position : QAQC Engineer/Inspector (Electrical & Instrument)
4. Company : YEMGAS (JV of TECHNIP, KBR, JGC)
Client : TOTAL - France
Project : Yemen Liquefied Natural Gas (YLNG Project no. 9869C-089),
Balhaf, Yemen
Duration : Dec. 2007 to Sep. 2009
Position : QAQC Engineer/Inspector (Electrical & Instrument)
5. Company : GASCO / ABS CONSULTING
Client : GASCO - U.A.E.
Project : GASCO Proj.-5225-LNG Habshan Gas Complex Expansion Project
(HGCE)
Duration : Apr. 2007 to Nov. 2007
Position : PMT - QAQC Engineer/Inspector (Electrical & Instrument)
6. Company : MDE / ABS CONSULTING
Client : Margham Dubai Gas Plant-MDE, U.A.E.
Project : Project 04-195 LNG Re-injection Compressor Controls Upgrade
Duration : Jun 2006 to Mar 2007
Position : PMT - QAQC Engineer/Inspector (Electrical & Instrument)
Job Description:
. Assigned as a QA/QC Engineer cum Inspector for monitoring the entire
construction of LNG Projects.
. Provide technical assistance to QC Manager for the preparation of Project
Quality Plan, Quality Control Procedures, Inspection and Test Plan,
checklist and Test record in accordance with project requirements and
specification.
. Coordinate with client and sub-contractors representative on daily basis
to discuss encountered deviations with specifications noted during job
execution and resolve all QC matters in accordance with the Project
requirements.
. Conduct site supervision, surveillance and issue Corrective Action and/or
Non Conformance Report for defined works out of standards and
specifications.
. Ensure proper documentation on all the subcontractor's activities of
Electrical & Instrumentation Works.
. Ensured that the requirements of the Project Quality System are
established, implemented and maintained.
. Review subcontractor Quality Control Procedures, Inspection and Test
Plans, Checklist and Test records.
. Establish the Quality System requirements for Sub-contractor, vendors and
liaises with the Client and sub-contractor QA/QC concerning quality
matters.
. Review sub-contractor Energization Packages, Inspection Assignment
Packages, testing reports, & other attachment required for inspection
acceptance and mechanical completion reports and ensure all the
installation complies with Project Standard, Specification, and
applicable industry code practices.
. Ensure that the quality, reliability and performance of the subcontractor
have implemented the system of Quality control in accordance with ISO
system with the aim of ensuring that their company operates in an
efficient and professional manner.
. Provide quality assurance services to construction division and Ensure
that adequate trained and experienced staffs are available to fulfill the
required tasks.
. Oversee the vendor's quality control activities to ensure all materials,
items and services supplied by the vendors complied with the contract
requirements.
. Report periodically on the performance of the quality system,
recommending and implementing remedial actions.
. Witness and approved different type of tests carried out in the project
and liaise with client and subcontractors on quality related issues.
. Ensured proper installation of Cables, Cable Testing, Glanding &
Termination of Electrical & Instrumentation Cables.
. Ensure proper Installation of Instrumentation works, Calibration,
Testing, Loop Checking and Pre-commissioning of Control Systems (i.e.
DCS, ESD, SCADA, PLC, BMS, VMS and F&G System) and field works (i.e.
Level, Flow, Pressure, Temperature, Control Valves, Fire & Gas Detection
System)
. Ensure proper installation of Electrical works (e.g Equipments i.e.
Switchgear, Transformer, MCC, UPS & BATTERIES, EDB, Motors, Lighting,
Cathodic Protection and Lightning & Grounding Systems).
. Conduct Electrical and Instrumentation Vendor Inspection. Participate in
Factory Acceptance Test (FAT/IFAT) and Issue Inspection Release
Certificate of all inspected items.
. Responsible for preparation and compilation of Quality Records and other
quality related documents for project acceptance and final handover.
- - - - - - -
7. Company : TECHNIP
Client : ORYX GTL - Qatar
Project : ORYX Gas to Liquid Project (GTL), Ras Laffan Industrial City,
Qatar
Duration : Sep. 2004 to Apr. 2006
Position : Instrumentation Supervisor
Job Description:
. Work in TECHNIP as part of Project Management Team to perform project
Supervision at Site.
. Monitor all material issuance, installation, testing and pre-
commissioning.
. Ensure proper work tracking on all the subcontractor's activities of
Instrumentation & Telecommunication Works.
. Ensured proper installation of cable, cable testing, Glanding &
Termination, Instruments Field Installation, Bench Calibration, Loop
Checking and Pre-commissioning of Control Systems (i.e. DCS, BMS, VMS,
ESD, etc.) including Field works (i.e. Level, Flow, Pressure,
Temperature, Control Valves, Fire & Gas Detection System) and Telecom
systems (i.e. Premises Distribution System (PDS), PABX system, Page/Party
System including splicing and testing of FIBER OPTIC for Voice/Data &
CCTV and other related Telecommunication system.
. In charge for the preparation of Instrument Loop Packages, Energization
Packages and other attachment required for acceptance and mechanical
completion prior to RFC.
. Liaise with client and subcontractors on construction issue related for
Instrumentation and Telecom works.
. Provide resolution to the engineering of all project encountered
deviations with specifications noted during job execution and resolve the
matters in accordance with the Project requirements.
. Involved in Site Acceptance Test for Control system (i.e. DCS, BMS, VMS,
ESD).
- - - - - - -
8. Company : TECHNIP
Client : SAUDI ARAMCO - K.S.A.
Project : Project 2124 - Qatif Facilities @ Berri Gas Plant, Qatif,
K.S.A.
Duration : Sep. 2003 to Jul. 2004
Position : QAQC Engineer/Inspector (Electrical & Instrumentation)
Job Description:
. Assigned as a QA/QC Engineer cum Inspector for monitoring the entire
construction of Gas Plant Projects.
. Provide technical assistance to QC Manager for the preparation of Project
Quality Plan, Quality Control Procedures, Inspection and Test Plan,
checklist and Test record in accordance with project requirements and
specification.
. Coordinate with client and sub-contractors representative on daily basis
to discuss encountered deviations with specifications noted during job
execution and resolve all QC matters in accordance with the Project
requirements.
. Conduct site supervision, surveillance and issue Corrective Action and/or
Non Conformance Report for defined works out of standards and
specifications.
. Ensure proper documentation on all the subcontractor's activities of
Electrical & Instrumentation Works.
. Ensured that the requirements of the Project Quality System are
established, implemented and maintained.
. Review subcontractor Quality Control Procedures, Inspection and Test
Plans, Checklist and Test records.
. Establish the Quality System requirements for Sub-contractor, vendors and
liaises with the Client and sub-contractor QA/QC concerning quality
matters.
. Review sub-contractor Energization Packages, Inspection Assignment
Packages, testing reports, & other attachment required for inspection
acceptance and mechanical completion reports and ensure all the
installation complies with Project Standard, Specification, and
applicable industry code practices.
. Ensure that the quality, reliability and performance of the subcontractor
have implemented the system of Quality control in accordance with ISO
system with the aim of ensuring that their company operates in an
efficient and professional manner.
. Provide quality assurance services to construction division and Ensure
that adequate trained and experienced staffs are available to fulfill the
required tasks.
. Oversee the vendor's quality control activities to ensure all materials,
items and services supplied by the vendors complied with the contract
requirements.
. Report periodically on the performance of the quality system,
recommending and implementing remedial actions.
. Witness and approved different type of tests carried out in the project
and liaise with client and subcontractors on quality related issues.
. Ensured proper installation of Cables, Cable Testing, Glanding &
Termination of Electrical & Instrumentation Cables.
. Ensure proper Installation of Instrumentation works, Calibration,
Testing, Loop Checking and Pre-commissioning of Control Systems (i.e.
DCS, ESD, SCADA, PLC, BMS, VMS and F&G System) and field works (i.e.
Level, Flow, Pressure, Temperature, Control Valves, Fire & Gas Detection
System)
. Ensure proper installation of Electrical works (e.g Equipments i.e.
Switchgear, Transformer, MCC, UPS & BATTERIES, EDB, Motors, Lighting,
Cathodic Protection and Lightning & Grounding Systems).
. Conduct Electrical and Instrumentation Vendor Inspection. Participate in
Factory Acceptance Test (FAT/IFAT) and Issue Inspection Release
Certificate of all inspected items.
. Responsible for preparation and compilation of Quality Records and other
quality related documents for project acceptance and final handover.
- - - - - - -
9. Company : FAFCO Ltd.
Client : SAUDI ARAMCO - K.S.A.
Project : Contract No.# 660******* - Installation of Burner Management
System at Abqaiq Oil Plant, Abqaiq, K.S.A
Duration : Sept. 2002 to Aug. 2003
Position : QAQC Supervisor (Electrical, Instrumentation & Telecom)
Job Description:
. Assigned as a QA/QC Supervisor for monitoring the entire construction of
the Installation of Burner Management System at Abqaiq Oil Plant, K.S.A
. Review the Project Quality Plans, shop drawings, project standards and
engineering specifications to ensure efficient execution of works.
. Provide technical assistance to QC Manager for the preparation of Quality
Control Procedures (QCPs), Inspection and Test Plan (ITPs), checklist,
Test record and Methods of Statement in accordance with project
requirements.
. Review of Factory Acceptance Test reports and manufacturers QC documents.
. Coordinate with client and sub-contractors representative on daily basis
to discuss encountered deviations with specifications noted during job
execution and resolve all QC matters in accordance with the Project
requirements.
. Conduct site supervision, surveillance and issue Corrective Action and/or
Non Conformance Report for defined works out of standards and
specifications.
. Responsible for preparation and compilation of Quality Records and other
quality related documents for project acceptance and final handover.
. Performed Internal Quality Audit as Internal Lead Auditor in "Upgrade
Fire Water & Utility Water System" in Uthmaniyah Gas Plant
- - - - - - -
10. Company : TECHNIP
Client : SAUDI ARAMCO - K.S.A.
Project : Project 2067 - Haradh Gas Plant Utilities & Offsites Project,
Haradh, K.S.A.
Duration : Dec. 2001 to Aug. 2002
Position : QAQC Engineer/Inspector (Instrument & Telecom)
11. Company : TECHNIP
Client : SAUDI ARAMCO - K.S.A.
Project : Contract # 44263/00, Project 1961 Hawiyah Gas Plant, SRL &
UTL, Hawiyah, K.S.A
Duration : Feb. 2001 to . Nov. 2001
Position : QAQC Engineer/Inspector (Instrument & Telecom)
12. Company : SIEMENS Ltd.
Client : SCECO - K.S.A.
Project : Construction of 380/132 kV, Substation # 9011, Howtat Sudair,
K.S.A.
Duration : Feb. 2000 to Jan. 2001
Position : QAQC Engineer (Electrical)
13. Company : FAFCO Ltd.
Client : SAUDI ARAMCO - K.S.A.
Project : C.N. 72469/00, Gas Detection and Monitoring System at Jeddah
Refinery, K.S.A.
Duration : May. 1999 to Jan. 2000
Position : QAQC Engineer (Electrical, Instrument & Telecom)
14. Company : FAFCO Ltd.
Client : SAUDI ARAMCO - K.S.A.
Project : C.N. 47152/00, DCS Replacement at Ain Dar GOSP 1 & 3, Ain Dar,
K.S.A.
Duration : Aug. 1998 to Apr. 1999
Position : QAQC Engineer (Electrical, Instrumentation & Telecom)
15. Company : ABV ROCK GROUP KB
Client : MODA - K.S.A.
Project : Saudi Strategic Underground Oil Storage Facilities, Site 5,
Jeddah, K.S.A.
Duration : Jun. 1994 to Jun. 1998
Position : QAQC Engineer (Electrical, Instrumentation &
Telecommunication)
16. Company : MASAWA BAY
Client : SHELL - Philippines
Project : Shell Oil Storage Plant, Lapu-lapu City, Philippines
Duration : May 1993 to May 1994
Position : QC Inspector (Electrical & Instrumentation)
Job Description:
. Assigned as a QA/QC Engineer cum Inspector for monitoring the entire
construction of Gas Plant Projects.
. Provide technical assistance to QC Manager for the preparation of Project
Quality Plan, Quality Control Procedures, Inspection and Test Plan,
checklist and Test record in accordance with project requirements and
specification.
. Coordinate with client and sub-contractors representative on daily basis
to discuss encountered deviations with specifications noted during job
execution and resolve all QC matters in accordance with the Project
requirements.
. Conduct site supervision, surveillance and issue Corrective Action and/or
Non Conformance Report for defined works out of standards and
specifications.
. Ensure proper documentation on all the subcontractor's activities of
Electrical & Instrumentation Works.
. Ensured that the requirements of the Project Quality System are
established, implemented and maintained.
. Review subcontractor Quality Control Procedures, Inspection and Test
Plans, Checklist and Test records.
. Establish the Quality System requirements for Sub-contractor, vendors and
liaises with the Client and sub-contractor QA/QC concerning quality
matters.
. Review sub-contractor Energization Packages, Inspection Assignment
Packages, testing reports, & other attachment required for inspection
acceptance and mechanical completion reports and ensure all the
installation complies with Project Standard, Specification, and
applicable industry code practices.
. Ensure that the quality, reliability and performance of the subcontractor
have implemented the system of Quality control in accordance with ISO
system with the aim of ensuring that their company operates in an
efficient and professional manner.
. Provide quality assurance services to construction division and Ensure
that adequate trained and experienced staffs are available to fulfill the
required tasks.
. Oversee the vendor's quality control activities to ensure all materials,
items and services supplied by the vendors complied with the contract
requirements.
. Report periodically on the performance of the quality system,
recommending and implementing remedial actions.
. Witness and approved different type of tests carried out in the project
and liaise with client and subcontractors on quality related issues.
. Ensured proper installation of Cables, Cable Testing, Glanding &
Termination of Electrical & Instrumentation Cables.
. Ensure proper Installation of Instrumentation works, Calibration,
Testing, Loop Checking and Pre-commissioning of Control Systems (i.e.
DCS, ESD, SCADA, PLC, BMS, VMS and F&G System) and field works (i.e.
Level, Flow, Pressure, Temperature, Control Valves, Fire & Gas Detection
System)
. Ensure proper installation of Electrical works (e.g Equipments i.e.
Switchgear, Transformer, MCC, UPS & BATTERIES, EDB, Motors, Lighting,
Cathodic Protection and Lightning & Grounding Systems).
. Conduct Electrical and Instrumentation Vendor Inspection. Participate in
Factory Acceptance Test (FAT/IFAT) and Issue Inspection Release
Certificate of all inspected items.
. Responsible for preparation and compilation of Quality Records and other
quality related documents for project acceptance and final handover.
Contact this candidate