I. Personal (DETAILS REQUIRED / CV):
your photo
Full Name: TRAN KHAC SON
No. 9/4/5, Bui Thi Xuan, Ward No.2, Tan Binh. Ho Chi
Address: Minh City.
Email: ab2i91@r.postjobfree.com
Mobile phone: 0918.614.256
19 / 07/ 1982
Date of Birth:
Thai Nguyen
Place of Birth:
Married
Marital Status:
Male
Gender:
Vietnam
Nationality:
II.
III.
IV.
V.
VI.
VII. Education History:
VIII.
From:
University: Valencia Technical University, Spain 2009 To: 2010
Qualifications: Controlling System Specialist
"José Antonio Echeverría" Science and From:
University: Technology University 2008 To: 2010
Master in Industrial Informatics and
Qualifications: Automatization
"José Antonio Echeverría" Science and From:
University: Technology University 2002 To: 2007
Qualifications: Automatic Engineer
From:
University: Hanoi University of Science and Technology 2000 To: 2001
Qualifications: Automatic Engineer
Page 1 of 7
IX.
X. Courses Attended
XI.
“José Antonio Echeverría” Science and
University: Technology University From: 2007 To: 2007
Qualifications: Basic course of Robot
XII.
XIII. Computer Skills:
XIV.
XV.
Beginner Expert
Office General
0 1 2 3 4 5
Excel X
MS Project X
Power Point X
Microsoft Word X
Beginner Expert
Software of Automatization
0 1 2 3 4 5
C/C++ X
C-Builder X
Matlab X
Labview X
Scada X
PLC X
AutoCAD X
Adobe Photoshop X
Virtual Robot X
XVI.
XVII. Foreign Languages (WRITTEN AND SPOKEN):
XVIII.
Written Spoken
Beginner Expert Beginner Expert
0 1 2 3 4 5 0 1 2 3 4 5
English: X X
Spanish: X X
XIX.
XX. Employment History:
XXI.
Company: Toyo-Thai Corporation Public Company Ltd. (TTCL)
Date: 10/2013 - Present
Job Title: Instrumentation & Control Engineer
Job Description:
- Assign Engineer for DAP 2 Project (Investor: DAP No 2 Joint Stock
Company - VINACHEM) and the responsibilities:
1. Design and Engineering activities including preparation of control
system design, Instrument Specifications Sheets/ Datasheets, Diagrams,
Calculations and Sizing Instruments (Control valve, Safety valve and Orifice),
Instrument Index, Drawings and Bill of Materials / Quantities, etc. of Utility Unit
• Instrument Engineering in Specification and operational of various instrument
2
devices, such as Transmitter (PT, DPT, LT, FT, TT); Valves (Control Valves,
SDV/BDV, On-Off Valves, Anti-Surge Control Valves, PCV, PSV, etc); Gauges
(PG, LG, TG); Packages/Skids and others and in Design (Hook-up, Lay-Out,
Specification/Datasheet, Details, P&ID, include with INTools software, PDMS
software).
• Automation System (PLC, DCS, SCADA, FGDS, FF, HMI Programming)
2. Procurement activities, preparing inquiry requisitions, technical bid
evaluation, reviewing and verification of vendor designs, schedule control,
quality control and test/inspection, etc.
• Estimating & budgeting
• Material & vendor selection
3. Construction planning and field supervising activities, including
preparation construction procedure, construction drawings, technical bid
evaluation, planning and control of schedule, safety, material, quality and field
changes, test and inspections, calibration and commissioning, as-built drawing,
etc…
• Field installation, including instrument tube & pipe system and instrument
cable system
• Construction work
• Testing & Calibration
• Pre-Commissioning & Commissioning
• Trouble-shooting
• Knowledge in Instrumentation standard organization (API, ISA, ANSI, ASME,
IEC, ASTM, NFPA)
• Ability in making technical specification for EPC (Engineering, Procurement
and Construction ).
XXII.
Page 3 of 7
Company: Toyo-Vietnam Corporation Ltd. (TVC)
Date: 09/2010 - Present
Job Title: Instrumentation & Control Engineer
Job Description:
1. Design and Engineering activities including preparation of control
system design, Instrument Specifications Sheets/ Datasheets, Diagrams,
Calculations and Sizing Instruments (Control valve, Safety valve and Orifice),
Instrument Index, Drawings and Bill of Materials / Quantities, etc.
• Instrument Engineering in Specification and operational of various instrument
devices, such as Transmitter (PT, DPT, LT, FT, TT); Valves (Control Valves,
SDV/BDV, On-Off Valves, Anti-Surge Control Valves, PCV, PSV, etc); Gauges
(PG, LG, TG); Packages/Skids and others and in Design (Hook-up, Lay-Out,
Specification/Datasheet, Details, P&ID, include with INTools software, PDMS
software).
• Automation System (PLC, DCS, SCADA, FGDS, FF, HMI Programming)
2. Procurement activities, preparing inquiry requisitions, technical bid
evaluation, reviewing and verification of vendor designs, schedule control,
quality control and test/inspection, etc.
• Estimating & budgeting
• Material & vendor selection
3. Construction planning and field supervising activities, including
preparation construction procedure, construction drawings, technical bid
evaluation, planning and control of schedule, safety, material, quality and field
changes, test and inspections, calibration and commissioning, as-built drawing,
etc…
• Field installation, including instrument tube & pipe system and instrument
cable system
• Construction work
• Testing & Calibration
• Pre-Commissioning & Commissioning
• Trouble-shooting
• Knowledge in Instrumentation standard organization (API, ISA, ANSI, ASME,
IEC, ASTM, NFPA)
• Ability in making technical specification for EPC (Engineering, Procurement
and Construction ).
4
Company: Center of Molecular Immunology
Date: 09/2007-06/2010
Job Title: Automatic Engineer
Job Description:
1. Investigating and completing excellently the master’s degree thesis in
Industry, Informatics and Automatization under the topic: “Renew the technology
of the control of the quality of purified water in medicine”, taking in to account
the conservation of raw material, the source of energy and reducing pollution of
the planet.
2. The results of the research was accepted by the international event of
“Technology and Climate Changes” held in Varadero, Cuba, 2010.
3. Responsibilities of supervising and checking the production system of
purified water in the named center.
4. To take part in the project of design and to implement the instruments of
a new plant of water purified of the center of molecular immunology. The
instruments are those that measure and control the flow, the temperature, the pH,
the conductivity, the concentration of CO2, concentration of chloride as the valve,
the transmitter, the controller …
5. To take part in the project of design and to implement the system
SCADA (Supervisory Control and Data Acquisition) of WinCC of the distribution
plant of the water for injection where there is that one works with OLE, OPC,
DCOM, COM + …
6. Knowledge in the Identification of the system of the old plant of water
purified to obtain the typical equation and to propose a new system of control of
the conductivity to obtain the cleanest, purer water and less it consumes of energy.
7. Knowledge of programming the controllers basic and advanced like
PID, FUZZY, PREDICTIVE (MPC), Internal Model Control (IMC)…
XXIII.
XXIV.
XXV.
XXVI.
XXVII.
XXVIII.
XXIX.
XXX.
XXXI.
XXXII.
XXXIII.
XXXIV.
XXXV.
XXXVI.
XXXVII.
Page 5 of 7
XXXVIII.
XXXIX. what particular qualities I will bring to the team:
- I am active and enthusiastic. I am willing to learn and do whatever it takes to do a
good job under pressure or on far missions.
- After one year studying Hanoi University of Science and Technology, as my
excellent grades, I was selected by the Ministry of Education and Training to follow
my career in Cuba.
-Be able to communicate in English, especially good reading comprehension on
professional English material.
- After study of my career, I followed the study of master in industrial computer
science and automation with the granted scholarship by the Ministry of Education in
my country.
-Experience in working with the programming such as C, C++, C-builder, Matlab,
LabView, Scada (WinCC, Movicom, Citec, Intouch…), Autocad, Photoshop, etc.
-Experience in working with protocols: OPC, DDE, Profibus, Modbus, TCP/IP, etc.
-Undertaking two basic and advanced courses on robot structure and programming
trained by lecturer from Valencia Technical University.
- Being proficient in computer, sound knowledge in Windows (Window 98, Window
2000, Window XP, Windows 7), and Linux.
- Being Proficient in MS Office applications (Excel, Word and PowerPoint).
- With the knowledge, the enthusiasm and my capacity of working, I trust that I can
undertake this position in your company.
XL. EXTRA-CURRICULAR ACTIVITIES:
Participate in many Volunteer programs organized by the University such as,
supporting the Suburb Electricity Company, La Habana, Annual World Labor Day,
etc.
Active Deputy Secretary of the Class BK 6645, Ha Noi Science and Technology
(2000-2001).
Deputy Secretary of the Vienamese Student Association, La Habana Cu Ba (2005-
2006).
Participate in the tutoring course on the Party organized by the Vietnamese Embassy
in Cuba (November 2005).
Take part in Student show competitions such as scientific, live knowledge and poem
reading, etc which annually organized in Cuba by the Embassy.
6
XLI.
XLII.
XLIII.
XLIV.
XLV.
XLVI. References:
XLVII.
Name: Miguel A. Capleville
Company: Center of Molecular Immunology
His/Her Position: Chief of department of Automatic
Phone: +53 7 271 7933
Time known: 09/2007-06/2010
Relationship: My former boss
Website: http://www.cim.co.cu
XLVIII.
XLIX. Comments of the chief:
During the performance of his labor, engineer Son Tran Khac has showed a high
level of professionalism as automatic engineer, correct discipline, interest and high
responsibility
L.
LI. I I
DECLARE THAT THE INFORMATION HAVE GIVEN IS TRUE AND COMPLETE TO THE BEST OF MY KNOWLEDGE AND
BELIEF. IN ADDITION, I UNDERSTAND I HAVE
THAT ANY FALSE STATEMENT OR DELIBERATE OMISSION IN THE INFORMATION
GIVEN ON THIS FORM MAY DISQUALIFY ME FOR EMPLOYMENT IN CONNECTION WITH SOME OR ALL CONTRACTS.
Date 20/ 06 /2013
Candidate
SON TRAN KHAC
Page 7 of 7