Curriculum Vitae
Europass
Personal Information
Surname/Name Cencig Marco
Address Via Umberto I, 17/C 33040 Premariacco, Udine, Italy
Telephone +390********* Mobile: +393*********
Fax -
E-mail ab1lok@r.postjobfree.com
Nationality Italian
Date of Birth 13/01/1987
Gender Male
Desired employment / Industiral Automation
Occupational field
Professional Experience
09/2006 – 08/2007
Date
Occupation or position held Warehouseman
Main activities and responsibilities
Name and address of employer MONACO Event Decoration, Via Baldasseria Bassa, Udine
Type of business or sector Warehouseman
12/2007 – 08/2012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of Industrial Plants
Name and address of employer THREAD Automazione di Ceglia Gianluca, Viale Grado 54, Pavia di Udine
Type of business or sector Automation
01/2008 – 07/2008
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of water treatment plant of energy combined gas plant
Modugno (Bari) owned by SORGENIA Spa
Name and address of employer VEOLIA Water Solutions & Technologies Italia Srl, Via Prà di Risi, Zoppola (Pordenone)
Type of business or sector Field test, check wiring and communications network and equipment configuration.
Test sequences of automation, automatic cycles of the system and interface with other automation
systems. Hardware used: Siemens S7 PLC, Instrumentation Profibus (DP and PA) Endress-Hauser;
Inverter Moeller.
08/2008 – 10/2007
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning services from the train rolling, fly cutting services and cooling
bed, packing bars and coils system in Maraba (Brazil) owned by SINOBRAS.
Page 1/6 - Curriculum vitae of
Cencig Marco
Name and address of employer SMS Meer Spa, Via Udine 91, Tarcento (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network.
Test sequences of automation, automatic cycles and interface with other automation systems. Hardware
used: Siemens S7 PLC, Scada Wonderware station; Inverter SIEI.
12/2008 – 01/2009
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Commissioning sea water desalination plant of energy combined gas plant Tipaza (Algeria),
commissioned by SNC-Lavalin
Name and address of employer VEOLIA Water Solutions & Technologies Italia Srl, Via Prà di Risi, Zoppola (Pordenone)
Type of business or sector Field testing, checking electrical wiring, instrumentation configuration.
Test sequences of automation, automatic cycles of the plant. Hardware used: Siemens S7 PLC,
Siemens Touch Panel in WCC Flexible; analog instrumentation Endress-Hauser, Siemens Inverter.
02/2009 – 03/2009
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software Development chemical plant of acetone re-concentration (Egypt).
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Software development and testing frameworks and communication. Pending commissioning. Hardware
used: PLC Beckhoff CX1020; Beckhoff touch panel; analog instrumentation Endress-Hauser; Benches
SMC valves.
04/2009 – 04/2009
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of fiberglass pipes forming machine.
Name and address of employer VEM Spa, Via Malignani 23, San Giorngio di Nogaro (Udine)
Type of business or sector Test sequences of automation, automatic cycles of the plant. Hardware used: Siemens S7 PLC;
05/2008 – 12/2009
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software Development of nitration chemical plant (Egypt).
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Software development and testing frameworks and communication. Pending commissioning. Hardware
used: PLC Beckhoff CX1020; Station SCADA iFix 4.5; analog instrumentation Endress-Hauser; Vacon;
Benches SMC valves.
01/2010 – 08/2010
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software Development of emulsions chemical plant (Turkey).
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Software development and testing frameworks and communication. Pending commissioning. Hardware
used: PLC Beckhoff CX1020; Station SCADA iFix 5.1; Touch Panel Moeller; Instrumentation Profibus-
DP Endress Hauser; analog instrumentation Vega; Vacon; Benches SMC valves, dosing scales Schenk;
09/2010 – 12/2010
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning services from the train rolling, fly cutting services and cooling
bed, packing bars and coils system in Olvega (Spain owned by RUGUI-Olvega.
Name and address of employer Industrias Lagun-artea Italia Srl, Via Nazionale 45,Tavagnacco (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network.
Test sequences of automation, automatic cycles of the plant and interface with other automation
systems. Hardware used: Siemens S7 PLC; Vacon; Inverter ABB.
12/2010 – 12/2010
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Technical assistance in the steelworks, implementation of neutralization circuit.
Name and address of employer FERRIERE NORD Spa, Z.I. Rivoli, Osoppo (Udine)
Page 2/6 - Curriculum vitae of
Cencig Marco
Type of business or sector Field testing, changes in Scada, changes in Touch Panel
Test automation sequences. Hardware used: Siemens S7 PLC, Siemens S5 PLC, Scada FIX32 Station;
WCC Flexible Touch Panel Siemens, ABB Inverter.
01/2011 – 04/2011
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software Development of emulsions chemical plant (Egypt).
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Software development and testing frameworks and communication. Pending commissioning. Hardware
used: PLC Beckhoff CX1020; Station SCADA iFix 5.1; Instrumentation Profibus-DP Endress Hauser;
analog instrumentation Vega; Vacon; Benches SMC valves, dosing scales Schenk;
05/2011 – 08/2011
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of nitration chemical plant (Vietnam)
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network. Test blank of automation
sequences. Hardware used: PLC Beckhoff CX1020; Station SCADA iFix 5.1; analog instrumentation
Endress-Hauser; Vacon; Benches SMC valves; Libra dosing Schenk;
09/2011 – 11/2011
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of exhaust ammunition plant (Abu Dhabi)
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network. Test sequences of automation,
automatic cycles of the plant. Hardware used: PLC Beckhoff CX1020; Beckhoff touch panel; analog
instrumentation Endress-Hauser; analog instrumentation Vega; Vacon; Benches SMC valves;
02/2012 – 02/2012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Revamping Software chemical emulsions plant (Italy).
Name and address of employer PRAVISANI Spa, Strada di Sequals 18, Sequals (Pordenone)
Type of business or sector Check electrical wiring and communication network. Changing the sequence of automation, automatic
cycles of the plant. Hardware used: Moeller PS416 PLC, Scada Station iFix 2.5; Touch Panel Hakko;
analog instrumentation Endress-Hauser; analog instrumentation Vega; Vacon; Libra dosing Schenk;
03/2012– 03/2012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Mechanical commissioning chemical emulsions plant (Egypt).
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network. Test blank of automation
sequences. Hardware used: PLC Beckhoff CX1020; Station SCADA iFix 5.1; Instrumentation Profibus-
DP Endress Hauser; analog instrumentation Vega; Vacon; Benches SMC valves, dosing scales Schenk;
05/2012– 05/2012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Commissioning exhaust ammunition plant (Abu Dhabi)
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Test sequences of automation, automatic cycles of the plant. Hardware used: PLC Beckhoff CX1020;
Beckhoff touch panel; analog instrumentation Endress-Hauser; analog instrumentation Vega; Vacon;
Benches SMC valves;
06/2012 – 07/2012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Revamping Software chemical emulsions plant (Italy).
Name and address of employer PRAVISANI Spa, Strada di Sequals 18, Sequals (Pordenone)
Page 3/6 - Curriculum vitae of
Cencig Marco
Type of business or sector Check electrical wiring and communication network. Changing the sequence of automation, automatic
cycles of the plant. Hardware used: Moeller PS416 PLC, Scada Station iFix 2.5; Touch Panel Hakko;
analog instrumentation Endress-Hauser; analog instrumentation Vega; Vacon; Libra dosing Schenk
07/2012 – 07/2012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Technical assistance services for software modifications of the rolling mill, flying shear and cooling bed
services, evacuation and packaging Olvega (Spain) owned by Rugui-Olvega.
Name and address of employer Industrias Lagun-artea Italia Srl, Via Nazionale 45,Tavagnacco (Udine)
Type of business or sector Edit and runs test automation, automatic cycles of the plant and interfacing with other automation
systems. Hardware used: Siemens S7 PLC; Vacon; Inverter ABB.
08/2012 – xx/3012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of Industrial Plants
Name and address of employer THREAD s.r.l, Viale Grado 54, Pavia di Udine
Type of business or sector Automation
09/2012 – 09/2012
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Mechanical commissioning chemical emulsions plant (Turkey).
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network. Test blank of automation
sequences. Hardware used: PLC Beckhoff CX1020; Station SCADA iFix 5.1; Touch Panel Moeller;
Instrumentation Profibus-DP Endress Hauser; analog instrumentation Vega; Vacon; Benches SMC
valves, dosing scales Schenk;
10/2012 – 01/2013
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of nitration chemical plant (Vietnam)
Name and address of employer Dott. Mariano Pravisani & C., Via Colloredo 98, Pasian di Prato (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network. Test blank of automation
sequences. Hardware used: PLC Beckhoff CX1020; Station SCADA iFix 5.1; analog instrumentation
Endress-Hauser; Vacon; Benches SMC valves; Libra dosing Schenk;
02/2012 – 04/2013
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning of machine for bending aluminum profiles (Italy)
Name and address of employer EMMEBI s.r.l., Via della Tecnologia 12, Pavia di Udine (Udine)
Type of business or sector Field testing, verification electrical wiring and communication network. Test blank automation
sequences. Test of automation sequences with product. Hardware used: Allen-Bradley CompactLogix
1769 Touch Panel PanelView Plus 1000; letura Encoder Card for HSC; SM1 DPI communication card;
inverter Allen-Bradley Powerflex 700;
05/2012 – 05/2013
Date
Occupation or position held Industrial Software Developer
Main activities and responsibilities Software development and commissioning handling system for theater stage of cruise ship Fincantieri
"Royal Princess" (Monfalcone)
Name and address of employer HMS s.r.l., Via Grazia Deledda 3, Staranzano (Gorizia)
Type of business or sector Field testing, verification electrical wiring and communication network. Test automation sequences.
Hardware used: PLC Phoenix ILC 130 ETH; Touch Panel ProFace GP-4301TM; ProFace AGP-3310H
Touch Panel, Inverter Control Techniques Commander-K;
Page 4/6 - Curriculum vitae of
Cencig Marco
Education and training
06/2006
Date
Title of qualification awarded ELECTRONIC TELECOMMUNICATIONS
Name and type of organization I.T.I Malignani (Udine) Italy
providing education and training
Personal skills and
competences
Mother tongue(s) Italian
Other(s) language(s) English
Self-assessment Understanding Spoken Written
Hearing Reading Spoken Interaction Spoken Production
I am able to manage the relationship
with the end customer in a formal and
professional method.European level Language: English Good Good Good Good Good Common European Framework of Reference for Languages
you are clever enough, the only
problem is the family
Social skills and competences I am able to relate to people of different nationalities and cultures through my experience abroad during
the commissioning.
I am able to manage the relationship with the end customer in a formal and professional method.
Organisational skills and I am able to independently organize work, setting priorities and taking responsibility. Skills acquired
competences through the different professional experiences listed above.
Excellent ability to read and interpret wiring diagrams and functional specifications.
Technical skills and competences
Excellent ability to understand electrical and mechanical manuals of instrumentation.
Good ability to work on and wire electrical panels of low voltage field.
Excellent knowledge PID systems of regulation of the PID.
Good knowledge in fuzzy logic control systems.
Page 5/6 - Curriculum vitae of
Cencig Marco
Excellent knowledge of using personal computers with Windows operating system, Microsoft Office,
Computer skills and competences
creating and managing virtual machines with VMware, configuration of office and industrial networks.
Excellent knowledge of automation systems SIEMENS PLC series 200, 300 and 400, remote profibus
cards and digital I / O, analog and encoder, operator panels and touch panels, STEP 7 development
environment, Microwin, Protool, WinCC flexible. Sufficient knowledge Plc 1200 Series, TIA Portal,
Wincc.
Excellent knowledge Beckhoff automation systems, Plc CX1020 series, remote Profibus card and
EtherCAT I / O cards digital and analog touch panel using Visu, CoDeSys development environment
TwinCAT PLC Control, TwinCAT System mangaer, direct communication ADS.
Good knowledge of automation systems ALLEN-BRADLEY, CompactLogix series PLC, DeviceNet, and
remote cards in DPI, I / O digital, analog and encoder cards, touch panel PanelView, PowerFlex drives.
Good knowledge of automation systems EATON (MOELLER), plc and PS416 series XC200, touch
panel series Micro Innovation XV, development environment and XSoft Sucosoft plc, touch panel
Galileo development environment.
Excellent knowledge supervision system IFIX (from ver 2.5 to ver 5.1). Sufficient knowledge of the
supervision system InTouch.
Excellent knowledge Endress-Hauser, VEGA, PEPPER-FUCHS, Profibus DP or PA, HART or Profibus
configuration or direct cable dedicated using PACTWARE and FieldCare applications.
Excellent knowledge and configuration capabilities load cells Pavone systems, system loss in weight
Schenk.
Excellent knowledge Vacon inverters and ABB configuration parameters and profibus communication.
Good knowledge inverter-Control Techniques, configuration parameters and profibus communication.
National license type B
Driving license
Page 6/6 - Curriculum vitae of
Cencig Marco